Vehicle-specific price guide

How much is a used BMW 330i rear bumper assembly?

Asking prices from 295 salvage yards in 41 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 13, 2026
Strong coverage860 priced of 1,207 observed6 variantsMethodology v2.1 →

Part overview

About the BMW 330i rear bumper assembly

What the rear bumper assembly does, common failure signs, and prices across all vehicles: used rear bumper assembly price guide →

Also known asRear Bumper CompleteRear Bumper with Reinforcement
Price summary

A used BMW 330i rear bumper assembly costs $125 to $2,296, with a median asking price of $550. Based on 860 priced salvage yard listings across the US, compatible across 2013–2025 (13 model years), updated Oct 13, 2026. Prices exclude shipping, core charges, and installation.

BMW 330i rear bumper assembly price snapshot

USD
Low
$125
Average
$598
High
$2,296
1,207 listings observed · 860 priced16d ago· How we price·

Report incorrect price

Reporting price for BMW 330i Rear Bumper Assembly

Reason

Regional supply

Where the BMW 330i rear bumper assembly is listed

We found priced BMW 330i rear bumper assembly listings at 295 salvage yards across 41 states. California supplies the most, with 220 listings (25% of the total) from 34 yards. Location matters: yards in Tennessee ask a median $308, while California yards ask $650, 111% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California22034$650+18%
Florida6622$418-24%
Texas6527$450-18%
New York6122$447-19%
Tennessee546$308-44%
New Jersey4419$625+14%
Michigan3619$457-17%
North Carolina3115$530-4%

States with at least 10 priced listings. % is versus the $550 national median.

Replacement cost

What is the BMW 330i rear bumper assembly replacement cost?

ESTIMATE
Used part
$550
BMW 330i median asking price
Labor
$95–$375
1–2.5 hours at $95–$150/hr
Estimated total
$645–$925
median used part + labor

Labor is a typical independent-shop range for rear bumper assembly replacement, not a quote for your vehicle; it does not include paint and refinishing if not color-matched, and sensor recalibration if equipped. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for BMW 330i Rear Bumper Assembly

$

Current avg: $598 — we suggest $508 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

w/o M-aerodynamic package; w/o park assist7 listings$2,081$1,800 – $2,296
M-aerodynamic package, park assist, w/o automatic park5 listingsInterchange 2024–2025$580$580 – $600
M-aerodynamic package, w/o park assist2 listingsInterchange 2023–2024$990$500 – $990
w/o M-aerodynamic package; park assist, automatic park1 listingsInterchange 2023–2025$995$995 – $995

Model-year comparison

What does a BMW 330i rear bumper assembly cost by year?

$360$531$702$874$1,045201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used BMW 330i rear bumper assembly cost?

Asking prices for a used BMW 330i rear bumper assembly are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, M-aerodynamic package, park assist, w/o automatic park, lists at a $580 median, while w/o M-aerodynamic package; w/o park assist commands $2,081, a 259% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2017 units carry the lowest median at $400, while 2023 tops the table at $995. Parts from 2013–2018 are interchangeable, so if the 2017 fits your vehicle, it offers the best value across 6 compatible years.

Against comparable vehicles, the BMW 330i sits 11% above the Ram 1500 ($497), 9% above the Dodge Durango ($505), and 11% above the Jeep Grand Cherokee ($495) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used rear bumper assembly: what to check

  1. Inspect internal reinforcement bar structure: Examine the inner metal crash bar for buckled steel, crushed crumple brackets, or hidden impact cracks behind the plastic shell.
  2. Verify sensor and blind-spot cutout options: Ensure the cover features the exact parking sensor hole count and internal blind-spot radar bracket mounts required by your trim.
  3. Check outer mounting tabs and guide slots: Broken fender-side attachment eyelets or torn diffuser clips will cause sagging body lines and uneven bumper gaps.
  4. Ask about intact wiring harness inclusion: Buying an assembly with the factory license plate light wiring and rear sensor harness intact saves tedious splicing time.
  5. Match exhaust tip cutout geometry: Single-outlet and dual-outlet bumper cutouts differ between engine options, so verify your tailpipe configuration before buying.

Keep browsing this vehicle

What other BMW 330i parts are priced?

Price comparisons

Compare BMW 330i rear bumper assembly prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

BMW 330i rear bumper assembly FAQ

How much is a used rear bumper assembly for a BMW 330i?

The median asking price is $550 across 860 priced listings from 295 yards. 2017 is the cheapest model year we track, with a median of $400.

How much does it cost to replace a BMW 330i rear bumper assembly?

Using a used part, a BMW 330i rear bumper assembly replacement typically runs $645–$925 all-in: the median used rear bumper assembly for this model lists at $550, and independent-shop labor for rear bumper assembly replacement typically takes 1–2.5 hours at $95–$150/hr ($95–$375). The labor figure does not include paint and refinishing if not color-matched, and sensor recalibration if equipped. Labor is a national part-level estimate, not a quote for your vehicle.

Which BMW 330i model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which BMW 330i rear bumper assembly years are interchangeable?

Salvage-yard interchange data links BMW 330i rear bumper assembly fitments across 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 13 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used BMW 330i Rear Bumper Assembly Cost — From $125 to $2,296