Mitsubishi Lancer rear bumper assembly price snapshot
- Low
- $75
- Average
- $245
- High
- $745
Vehicle-specific price guide
How much is a used Mitsubishi Lancer rear bumper assembly?
Asking prices from 86 salvage yards in 25 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 14, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Mitsubishi Lancer rear bumper assembly
What the rear bumper assembly does, common failure signs, and prices across all vehicles: used rear bumper assembly price guide →
Also known asRear Bumper CompleteRear Bumper with Reinforcement
Price summary
A used Mitsubishi Lancer rear bumper assembly costs $75 to $745, with a median asking price of $226. Based on 178 priced salvage yard listings across the US, compatible across 2008–2017 (10 model years), updated Oct 14, 2026. Prices exclude shipping, core charges, and installation.
USD
Regional supply
Where the Mitsubishi Lancer rear bumper assembly is listed
We found priced Mitsubishi Lancer rear bumper assembly listings at 86 salvage yards across 25 states. Texas supplies the most, with 22 listings (12% of the total) from 12 yards. Location matters: yards in Ohio ask a median $110, while California yards ask $450, 309% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| Texas | 22 | 12 | $150-34% |
| Arizona | 22 | 10 | $250+11% |
| Florida | 21 | 15 | $249+10% |
| California | 21 | 11 | $450+99% |
| Tennessee | 11 | 2 | $150-34% |
| Illinois | 10 | 3 | $125-45% |
| Ohio | 10 | 4 | $110-51% |
States with at least 10 priced listings. % is versus the $226 national median.
Replacement cost
What is the Mitsubishi Lancer rear bumper assembly replacement cost?
- Used part
- $226
- Mitsubishi Lancer median asking price
- Labor
- $95–$375
- 1–2.5 hours at $95–$150/hr
- Estimated total
- $320–$600
- median used part + labor
Labor is a typical independent-shop range for rear bumper assembly replacement, not a quote for your vehicle; it does not include paint and refinishing if not color-matched, and sensor recalibration if equipped. The part price is the live median from the salvage-yard listings on this page. How we price
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a Mitsubishi Lancer rear bumper assembly cost by year?
Market analysis
How much does a used Mitsubishi Lancer rear bumper assembly cost?
Asking prices for a used Mitsubishi Lancer rear bumper assembly are unusually spread out: the top listing asks about 10 times what the cheapest does, so which unit you pick matters more than the median.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, Hatchback, lists at a $220 median, while Sedan commands $250, a 14% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2015 units carry the lowest median at $220, while 2017 tops the table at $250. Parts from 2008–2017 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 10 compatible years.
Against comparable vehicles, the Mitsubishi Lancer sits 55% below the Ram 1500 ($497), 55% below the Dodge Durango ($505), and 54% below the Jeep Grand Cherokee ($495) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used rear bumper assembly: what to check
- Inspect internal reinforcement bar structure: Examine the inner metal crash bar for buckled steel, crushed crumple brackets, or hidden impact cracks behind the plastic shell.
- Verify sensor and blind-spot cutout options: Ensure the cover features the exact parking sensor hole count and internal blind-spot radar bracket mounts required by your trim.
- Check outer mounting tabs and guide slots: Broken fender-side attachment eyelets or torn diffuser clips will cause sagging body lines and uneven bumper gaps.
- Ask about intact wiring harness inclusion: Buying an assembly with the factory license plate light wiring and rear sensor harness intact saves tedious splicing time.
- Match exhaust tip cutout geometry: Single-outlet and dual-outlet bumper cutouts differ between engine options, so verify your tailpipe configuration before buying.
Keep browsing this vehicle
What other Mitsubishi Lancer parts are priced?
01wide ±162%
Axle Shaft
$102median
$20$350
02wide ±176%
Tail Light
$70median
$24$271
03wide ±132%
Transmission Control Module
$102median
$40$310
04wide ±148%
Air Bag
$103median
$30$335
05wide ±110%
Strut
$55median
$30$151
06wide ±164%
Front Seat
$143median
$50$518
07wide ±145%
Tailgate
$210median
$75$685
08wide ±218%
Car Radio
$118median
$40$555
09wide ±178%
Engine Computer
$115median
$40$450
10wide ±122%
Transmission
$1,900median
$365$4,995
11wide ±231%
Brake Caliper
$50median
$14$245
12wide ±93%
Quarter Panel
$356median
$191$850
Price comparisons
Compare Mitsubishi Lancer rear bumper assembly prices
Rear Bumper Assemblycompare
Ram1500vsMitsubishiLancer
1500$497
Lancer$226
$271 diff7,276 listings
Rear Bumper AssemblycompareDodgeDurangovsMitsubishiLancer
Durango$505
Lancer$226
$279 diff6,900 listings
Rear Bumper AssemblycompareJeepGrandCherokeevsMitsubishiLancer
Cherokee$495
Lancer$226
$269 diff6,880 listings
Rear Bumper AssemblycompareFordF150vsMitsubishiLancer
F150$560
Lancer$226
$334 diff5,731 listings
Rear Bumper AssemblycompareJeepCherokeevsMitsubishiLancer
Cherokee$350
Lancer$226
$124 diff4,967 listings
Rear Bumper AssemblycompareFordEdgevsMitsubishiLancer
Edge$505
Lancer$226
$279 diff4,691 listings
Compare fitments
What do similar vehicles charge for this part?
Acurawide ±71%
Acura ILX
$445median
$150$784
Acurawide ±71%
Acura Integra
$540median
$230$1,000
Acurawide ±80%
Acura MDX
$800median
$165$1,449
Acurawide ±125%
Acura RDX
$500median
$119$1,365
Acurawide ±148%
Acura TLX
$520median
$125$1,661
Audiwide ±133%
Audi A4
$700median
$125$1,990
Audiwide ±163%
Audi A6
$799median
$148$2,750
Audiwide ±133%
Audi Q3
$800median
$170$2,300
Mitsubishiwide ±129%
Mitsubishi Eclipse Cross
$566median
$199$1,660
Mitsubishiwide ±91%
Mitsubishi Mirage
$300median
$125$672
Mitsubishiwide ±201%
Mitsubishi Outlander
$399median
$100$1,700
Mitsubishiwide ±132%
Mitsubishi Outlander Sport
$425median
$96$1,214
Common questions
Mitsubishi Lancer rear bumper assembly FAQ
How much is a used rear bumper assembly for a Mitsubishi Lancer?
The median asking price is $226 across 178 priced listings from 86 yards. 2015 is the cheapest model year we track, with a median of $220.
How much does it cost to replace a Mitsubishi Lancer rear bumper assembly?
Using a used part, a Mitsubishi Lancer rear bumper assembly replacement typically runs $320–$600 all-in: the median used rear bumper assembly for this model lists at $226, and independent-shop labor for rear bumper assembly replacement typically takes 1–2.5 hours at $95–$150/hr ($95–$375). The labor figure does not include paint and refinishing if not color-matched, and sensor recalibration if equipped. Labor is a national part-level estimate, not a quote for your vehicle.
Which Mitsubishi Lancer model years does this price guide cover?
This guide currently has year-level pricing for 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Mitsubishi Lancer rear bumper assembly years are interchangeable?
Salvage-yard interchange data links Mitsubishi Lancer rear bumper assembly fitments across 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017. Searching all 10 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.