Toyota Sienna rear bumper assembly price snapshot
- Low
- $85
- Average
- $434
- High
- $1,296
Vehicle-specific price guide
How much is a used Toyota Sienna rear bumper assembly?
Asking prices from 320 salvage yards in 39 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 24, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Toyota Sienna rear bumper assembly
What the rear bumper assembly does, common failure signs, and prices across all vehicles: used rear bumper assembly price guide →
Also known asRear Bumper CompleteRear Bumper with Reinforcement
Price summary
A used Toyota Sienna rear bumper assembly costs $85 to $1,296, with a median asking price of $380. Based on 1,253 priced salvage yard listings across the US, compatible across 2011–2025 (15 model years), updated Sep 24, 2026. Prices exclude shipping, core charges, and installation.
USD
Regional supply
Where the Toyota Sienna rear bumper assembly is listed
We found priced Toyota Sienna rear bumper assembly listings at 320 salvage yards across 39 states. California supplies the most, with 262 listings (20% of the total) from 44 yards. Location matters: yards in Oklahoma ask a median $96, while Texas yards ask $421, 339% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| California | 262 | 44 | $405+7% |
| Michigan | 114 | 25 | $399+5% |
| Wisconsin | 111 | 15 | $281-26% |
| Illinois | 88 | 18 | $325-14% |
| Ohio | 84 | 16 | $350-8% |
| Texas | 77 | 24 | $421+11% |
| Indiana | 64 | 14 | $350-8% |
| Oklahoma | 59 | 4 | $96-75% |
States with at least 10 priced listings. % is versus the $380 national median.
Replacement cost
What is the Toyota Sienna rear bumper assembly replacement cost?
- Used part
- $380
- Toyota Sienna median asking price
- Labor
- $95–$375
- 1–2.5 hours at $95–$150/hr
- Estimated total
- $475–$755
- median used part + labor
Labor is a typical independent-shop range for rear bumper assembly replacement, not a quote for your vehicle; it does not include paint and refinishing if not color-matched, and sensor recalibration if equipped. The part price is the live median from the salvage-yard listings on this page. How we price
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a Toyota Sienna rear bumper assembly cost by year?
202569 listingsFits 5 years$443$100 – $1,2002024133 listingsFits 5 years$570$95 – $1,2962023138 listingsFits 5 years$660$85 – $1,296202287 listingsFits 5 years$750$85 – $1,2962021136 listingsFits 5 years$581$85 – $1,2962020138 listingsFits 3 years$460$150 – $881201990 listingsFits 3 years$465$150 – $8812018124 listingsFits 3 years$422$150 – $881201795 listingsFits 7 years$300$95 – $5002016150 listingsFits 7 years$275$95 – $5602015486 listingsFits 7 years$300$95 – $550
Market analysis
How much does a used Toyota Sienna rear bumper assembly cost?
Asking prices for a used Toyota Sienna rear bumper assembly are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, park assist, gloss black mesh, lists at a $433 median, while w/o park assist commands $500, a 15% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2016 units carry the lowest median at $275, while 2022 tops the table at $750. Parts from 2011–2017 are interchangeable, so if the 2016 fits your vehicle, it offers the best value across 7 compatible years.
Against comparable vehicles, the Toyota Sienna sits 24% below the Ram 1500 ($497), 25% below the Dodge Durango ($505), and 23% below the Jeep Grand Cherokee ($495) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used rear bumper assembly: what to check
- Inspect internal reinforcement bar structure: Examine the inner metal crash bar for buckled steel, crushed crumple brackets, or hidden impact cracks behind the plastic shell.
- Verify sensor and blind-spot cutout options: Ensure the cover features the exact parking sensor hole count and internal blind-spot radar bracket mounts required by your trim.
- Check outer mounting tabs and guide slots: Broken fender-side attachment eyelets or torn diffuser clips will cause sagging body lines and uneven bumper gaps.
- Ask about intact wiring harness inclusion: Buying an assembly with the factory license plate light wiring and rear sensor harness intact saves tedious splicing time.
- Match exhaust tip cutout geometry: Single-outlet and dual-outlet bumper cutouts differ between engine options, so verify your tailpipe configuration before buying.
Keep browsing this vehicle
What other Toyota Sienna parts are priced?
01wide ±245%
Transmission Control Module
$110median
$30$570
02wide ±229%
Front Seat
$175median
$50$850
03wide ±203%
Strut
$90median
$35$400
04wide ±131%
Headlight Assembly
$433median
$73$1,205
05wide ±281%
Air Bag
$250median
$45$1,450
06wide ±186%
Center Console
$125median
$35$500
07wide ±145%
Tail Light
$128median
$30$400
08wide ±276%
Grille
$138median
$24$787
09wide ±241%
Car Radio
$344median
$56$1,712
10wide ±156%
Steering Column
$190median
$50$644
11wide ±290%
Wheels
$201median
$34$1,200
12wide ±195%
Side Mirror
$205median
$45$844
Price comparisons
Compare Toyota Sienna rear bumper assembly prices
Rear Bumper Assemblycompare
Ram1500vsToyotaSienna
1500$497
Sienna$380
$117 diff8,351 listings
Rear Bumper AssemblycompareDodgeDurangovsToyotaSienna
Durango$505
Sienna$380
$125 diff7,975 listings
Rear Bumper AssemblycompareJeepGrandCherokeevsToyotaSienna
Cherokee$495
Sienna$380
$115 diff7,955 listings
Rear Bumper AssemblycompareFordF150vsToyotaSienna
F150$560
Sienna$380
$180 diff6,806 listings
Rear Bumper AssemblycompareJeepCherokeevsToyotaSienna
Cherokee$350
Sienna$380
$30 diff6,042 listings
Rear Bumper AssemblycompareFordEdgevsToyotaSienna
Edge$505
Sienna$380
$125 diff5,766 listings
Compare fitments
What do similar vehicles charge for this part?
Acurawide ±71%
Acura ILX
$445median
$150$784
Acurawide ±71%
Acura Integra
$540median
$230$1,000
Acurawide ±80%
Acura MDX
$800median
$165$1,449
Acurawide ±125%
Acura RDX
$500median
$119$1,365
Toyotawide ±139%
Toyota 4Runner
$333median
$99$1,026
Toyotawide ±134%
Toyota Camry
$395median
$89$1,149
Toyotawide ±105%
Toyota Corolla
$450median
$125$1,074
Toyotawide ±130%
Toyota Highlander
$466median
$72$1,285
Toyotawide ±214%
Toyota Prius
$385median
$73$1,720
Toyotawide ±88%
Toyota RAV4
$495median
$110$980
Toyotawide ±146%
Toyota Tacoma
$649median
$105$2,000
Toyotawide ±198%
Toyota Tundra
$611median
$86$2,500
Common questions
Toyota Sienna rear bumper assembly FAQ
How much is a used rear bumper assembly for a Toyota Sienna?
The median asking price is $380 across 1,253 priced listings from 320 yards. 2016 is the cheapest model year we track, with a median of $275.
How much does it cost to replace a Toyota Sienna rear bumper assembly?
Using a used part, a Toyota Sienna rear bumper assembly replacement typically runs $475–$755 all-in: the median used rear bumper assembly for this model lists at $380, and independent-shop labor for rear bumper assembly replacement typically takes 1–2.5 hours at $95–$150/hr ($95–$375). The labor figure does not include paint and refinishing if not color-matched, and sensor recalibration if equipped. Labor is a national part-level estimate, not a quote for your vehicle.
Which Toyota Sienna model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Toyota Sienna rear bumper assembly years are interchangeable?
Salvage-yard interchange data links Toyota Sienna rear bumper assembly fitments across 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 15 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.