Vehicle-specific price guide

How much is a used Buick Encore GX door assembly?

Asking prices from 99 salvage yards in 12 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 8, 2026
Strong coverage363 priced of 413 observed1 variantMethodology v2.1 →

Part overview

About the Buick Encore GX door assembly

What the door assembly does, common failure signs, and prices across all vehicles: used door assembly price guide →

Also known asFront DoorDoor Shell
Price summary

A used Buick Encore GX door assembly costs $475 to $1,185, with a median asking price of $836. Based on 363 priced salvage yard listings across the US, compatible across 2020–2026 (7 model years), updated Oct 8, 2026. Prices exclude shipping, core charges, and installation.

Buick Encore GX door assembly price snapshot

USD
Low
$475
Average
$848
High
$1,185
413 listings observed · 363 priced21d ago· How we price·

Report incorrect price

Reporting price for Buick Encore GX Door Assembly

Reason

Regional supply

Where the Buick Encore GX door assembly is listed

We found priced Buick Encore GX door assembly listings at 99 salvage yards across 12 states. California supplies the most, with 112 listings (29% of the total) from 23 yards. Location matters: yards in Utah ask a median $715, while Texas yards ask $900, 26% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California11223$815-3%
Texas9425$900+8%
Illinois5211$830-1%
Arizona485$825-1%
Indiana214$797-5%
Wisconsin166$866+4%
Florida127$795-5%
Utah116$715-14%

States with at least 10 priced listings. % is versus the $836 national median.

Replacement cost

What is the Buick Encore GX door assembly replacement cost?

ESTIMATE
Used part
$836
Buick Encore GX median asking price
Labor
$240–$750
2.5–5 hours at $95–$150/hr
Estimated total
$1,075–$1,585
median used part + labor

Labor is a typical independent-shop range for door assembly replacement, not a quote for your vehicle; it does not include paint and refinishing if not color-matched, and interior trim transfer. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Buick Encore GX Door Assembly

$

Current avg: $848 — we suggest $721 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

LH10 listingsInterchange 2020–2024$825$666 – $1,166

Model-year comparison

What does a Buick Encore GX door assembly cost by year?

$734$786$839$892$945202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Buick Encore GX door assembly cost?

Asking prices for a used Buick Encore GX door assembly sit in a fairly tight band around the $836 median, so most quotes far outside it deserve a second look.

Model year matters too: 2022 units carry the lowest median at $815, while 2024 tops the table at $900. Parts from 2020–2026 are interchangeable, so if the 2022 fits your vehicle, it offers the best value across 7 compatible years.

Against comparable vehicles, the Buick Encore GX sits 14% above the Mercedes C Class ($735), 14% above the Ford Explorer ($735), and 97% above the Hyundai Elantra ($425) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used door assembly: what to check

  1. Inspect bottom pinch welds for hidden rust: Check the lower inner door seam for bubbling paint, cracked seam sealer, or clogged drain holes that trap water.
  2. Confirm harness connector pin count: Verify the main pillar door plug matches your vehicle harness to support power folding mirrors, memory seats, and speaker channels.
  3. Verify glass tint color and motor operation: Test that the power window glides smoothly and that the factory glass tint matches your vehicle's remaining windows.
  4. Check hinge pin slop and check-strap mounts: Lift up on the rear door edge to detect worn hinge pins or cracked sheet metal around the check-strap anchor.
  5. Transfer original door lock cylinders: Swap over your original key tumbler during installation to retain physical key access during dead-battery emergencies.

Keep browsing this vehicle

What other Buick Encore GX parts are priced?

Price comparisons

Compare Buick Encore GX door assembly prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Buick Encore GX door assembly FAQ

How much is a used door assembly for a Buick Encore GX?

The median asking price is $836 across 363 priced listings from 99 yards. 2022 is the cheapest model year we track, with a median of $815.

How much does it cost to replace a Buick Encore GX door assembly?

Using a used part, a Buick Encore GX door assembly replacement typically runs $1,075–$1,585 all-in: the median used door assembly for this model lists at $836, and independent-shop labor for door assembly replacement typically takes 2.5–5 hours at $95–$150/hr ($240–$750). The labor figure does not include paint and refinishing if not color-matched, and interior trim transfer. Labor is a national part-level estimate, not a quote for your vehicle.

Which Buick Encore GX model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Buick Encore GX door assembly years are interchangeable?

Salvage-yard interchange data links Buick Encore GX door assembly fitments across 2020, 2021, 2022, 2023, 2024, 2025, 2026. Searching all 7 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Buick Encore GX Door Assembly Cost — From $475 to $1,185