Vehicle-specific price guide

How much is a used Lexus NX300 door assembly?

Asking prices from 93 salvage yards in 21 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 9, 2026
Strong coverage258 priced of 315 observed2 variantsMethodology v2.1 →

Part overview

About the Lexus NX300 door assembly

What the door assembly does, common failure signs, and prices across all vehicles: used door assembly price guide →

Also known asFront DoorDoor Shell
Price summary

A used Lexus NX300 door assembly costs $465 to $1,554, with a median asking price of $1,027. Based on 258 priced salvage yard listings across the US, compatible across 2018–2021 (4 model years), updated Oct 9, 2026. Prices exclude shipping, core charges, and installation.

Lexus NX300 door assembly price snapshot

USD
Low
$465
Average
$1,011
High
$1,554
315 listings observed · 258 priced20d ago· How we price·

Report incorrect price

Reporting price for Lexus NX300 Door Assembly

Reason

Regional supply

Where the Lexus NX300 door assembly is listed

We found priced Lexus NX300 door assembly listings at 93 salvage yards across 21 states. California supplies the most, with 58 listings (21% of the total) from 13 yards. Location matters: yards in Michigan ask a median $600, while Missouri yards ask $1,142, 90% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California5813$775-25%
Texas3811$900-12%
Missouri259$1,142+11%
Wisconsin245$1,098+7%
Illinois209$1,100+7%
Nebraska194$1,035+1%
Michigan179$600-42%
Ohio118$1,107+8%

States with at least 10 priced listings. % is versus the $1,027 national median.

Replacement cost

What is the Lexus NX300 door assembly replacement cost?

ESTIMATE
Used part
$1,027
Lexus NX300 median asking price
Labor
$240–$750
2.5–5 hours at $95–$150/hr
Estimated total
$1,265–$1,775
median used part + labor

Labor is a typical independent-shop range for door assembly replacement, not a quote for your vehicle; it does not include paint and refinishing if not color-matched, and interior trim transfer. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Lexus NX300 Door Assembly

$

Current avg: $1,011 — we suggest $859 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2021)

Other years202020192018
LH36 listingsInterchange 2018–2021$1,035$650 – $1,355
RH31 listingsInterchange 2018–2021$955$575 – $1,376

Model-year comparison

What does a Lexus NX300 door assembly cost by year?

$892$956$1,021$1,085$1,1502018201920202021
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Lexus NX300 door assembly cost?

Asking prices for a used Lexus NX300 door assembly are unusually spread out: the top listing asks about 3 times what the cheapest does, so which unit you pick matters more than the median.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, RH, lists at a $955 median, while LH commands $1,035, a 8% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2018 units carry the lowest median at $991, while 2020 tops the table at $1,095. Parts from 2018–2021 are interchangeable, so if the 2018 fits your vehicle, it offers the best value across 4 compatible years.

Against comparable vehicles, the Lexus NX300 sits 40% above the Mercedes C Class ($735), 40% above the Ford Explorer ($735), and 142% above the Hyundai Elantra ($425) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used door assembly: what to check

  1. Inspect bottom pinch welds for hidden rust: Check the lower inner door seam for bubbling paint, cracked seam sealer, or clogged drain holes that trap water.
  2. Confirm harness connector pin count: Verify the main pillar door plug matches your vehicle harness to support power folding mirrors, memory seats, and speaker channels.
  3. Verify glass tint color and motor operation: Test that the power window glides smoothly and that the factory glass tint matches your vehicle's remaining windows.
  4. Check hinge pin slop and check-strap mounts: Lift up on the rear door edge to detect worn hinge pins or cracked sheet metal around the check-strap anchor.
  5. Transfer original door lock cylinders: Swap over your original key tumbler during installation to retain physical key access during dead-battery emergencies.

Keep browsing this vehicle

What other Lexus NX300 parts are priced?

Price comparisons

Compare Lexus NX300 door assembly prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Lexus NX300 door assembly FAQ

How much is a used door assembly for a Lexus NX300?

The median asking price is $1,027 across 258 priced listings from 93 yards. 2018 is the cheapest model year we track, with a median of $991.

How much does it cost to replace a Lexus NX300 door assembly?

Using a used part, a Lexus NX300 door assembly replacement typically runs $1,265–$1,775 all-in: the median used door assembly for this model lists at $1,027, and independent-shop labor for door assembly replacement typically takes 2.5–5 hours at $95–$150/hr ($240–$750). The labor figure does not include paint and refinishing if not color-matched, and interior trim transfer. Labor is a national part-level estimate, not a quote for your vehicle.

Which Lexus NX300 model years does this price guide cover?

This guide currently has year-level pricing for 2021, 2020, 2019, 2018. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Lexus NX300 door assembly years are interchangeable?

Salvage-yard interchange data links Lexus NX300 door assembly fitments across 2018, 2019, 2020, 2021. Searching all 4 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Lexus NX300 Door Assembly Cost — From $465 to $1,554