Used Jeep Wrangler engine from a salvage yard

Vehicle-specific price guide

How much is a used Jeep Wrangler engine?

Asking prices from 539 salvage yards in 46 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 31, 2026
Strong coverage1,886 priced of 2,236 observed6 variantsMethodology v2.1 →

Part overview

About the Jeep Wrangler engine

What the engine does, common failure signs, and prices across all vehicles: used engine price guide →

Also known asMotorEngine Assembly
Price summary

A used Jeep Wrangler engine costs $2,499 to $8,730, with a median asking price of $4,600. Based on 1,886 priced salvage yard listings across the US, compatible across 2014–2026 (13 model years), updated Oct 31, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$4,594
Grade B (good)$4,584

Jeep Wrangler engine price snapshot

USD
Low
$2,499
Average
$4,727
High
$8,730
2,236 listings observed · 1,886 pricedUpdated 14h ago· How we price·

Report incorrect price

Reporting price for Jeep Wrangler Engine

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$2,499–$8,7301,244 listings
Grade BStandard used$2,500–$8,730339 listings
Grade XUngraded$2,500–$8,161303 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $2,499–$8,730 overall range

Regional supply

Where the Jeep Wrangler engine is listed

We found priced Jeep Wrangler engine listings at 539 salvage yards across 46 states. California supplies the most, with 617 listings (15% of the total) from 42 yards. Location matters: yards in California ask a median $3,900, while Michigan yards ask $5,385, 38% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California61742$3,900-15%
Michigan37741$5,385+17%
Florida29839$4,806+4%
Texas22835$4,678+2%
Illinois21319$5,045+10%
Missouri18917$5,265+14%
Ohio15026$4,643+1%
New York14933$4,670+2%

States with at least 10 priced listings. % is versus the $4,600 national median.

Replacement cost

What is the Jeep Wrangler engine replacement cost?

ESTIMATE
Used part
$4,600
Jeep Wrangler median asking price
Labor
$950–$3,000
10–20 hours at $95–$150/hr
Estimated total
$5,550–$7,600
median used part + labor

Labor is a typical independent-shop range for engine replacement, not a quote for your vehicle; it does not include fluids, gaskets, and any while-in-there parts like mounts or a clutch. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Jeep Wrangler Engine

$

Current avg: $4,727 — we suggest $4,018 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

gasoline, 2.0L, gasoline (VIN N, 8th digit), LHD50 listingsInterchange 2024–2026$4,043$3,593 – $5,510
gasoline, 3.6L (VIN G, 8th digit), AT50 listingsInterchange 2018–2026$5,090$3,418 – $6,460
gasoline, 3.6L (VIN G, 8th digit), MT49 listingsInterchange 2018–2025$4,450$3,000 – $7,125
gasoline, 2.0L, plug-in hybrid (VIN 6, 8th digit, PHEV)42 listingsInterchange 2024–2025$3,843$3,350 – $7,300
gasoline, 6.4L (VIN J, 8th digit)12 listingsInterchange 2021–2025$5,900$2,500 – $8,161

gasoline, 2.0L, gasoline (VIN N, 8th digit), RHD

1 listings
$3,200$3,200 – $3,200

Model-year comparison

What does a Jeep Wrangler engine cost by year?

$2,700$3,349$3,999$4,648$5,29720152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Jeep Wrangler engine cost?

Asking prices for a used Jeep Wrangler engine are unusually spread out: the top listing asks about 3 times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 0% premium over grade-B stock, with grade-A medians at $4,594.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, gasoline, 2.0L, gasoline (VIN N, 8th digit), RHD, lists at a $3,200 median, while gasoline, 6.4L (VIN J, 8th digit) commands $5,900, a 84% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2016 units carry the lowest median at $3,000, while 2020 tops the table at $5,045. Parts from 2014–2018 are interchangeable, so if the 2016 fits your vehicle, it offers the best value across 5 compatible years.

Against comparable vehicles, the Jeep Wrangler sits 85% above the Hyundai Elantra ($2,483), 481% above the Honda Civic ($792), and 130% above the Toyota RAV4 ($2,000) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used engine: what to check

  1. Ask for a compression or leak-down test result. Reputable yards test engines before sale.
  2. Under 100K miles is the sweet spot for a used engine; insist on documented donor mileage.
  3. Confirm what's included: manifolds, sensors, and accessories vary by yard and change the real price.
  4. Match the engine code exactly. The same model year can ship with multiple displacements.
  5. Budget for new gaskets, seals, and fluids on installation; they're cheap insurance on a used engine.

Keep browsing this vehicle

What other Jeep Wrangler parts are priced?

Price comparisons

Compare Jeep Wrangler engine prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Jeep Wrangler engine FAQ

How much is a used engine for a Jeep Wrangler?

The median asking price is $4,600 across 1,886 priced listings from 539 yards. Grade-A units, the cleanest stock, have a median of $4,594. 2016 is the cheapest model year we track, with a median of $3,000.

How much does it cost to replace a Jeep Wrangler engine?

Using a used part, a Jeep Wrangler engine replacement typically runs $5,550–$7,600 all-in: the median used engine for this model lists at $4,600, and independent-shop labor for engine replacement typically takes 10–20 hours at $95–$150/hr ($950–$3,000). The labor figure does not include fluids, gaskets, and any while-in-there parts like mounts or a clutch. Labor is a national part-level estimate, not a quote for your vehicle.

Which Jeep Wrangler model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Jeep Wrangler engine years are interchangeable?

Salvage-yard interchange data links Jeep Wrangler engine fitments across 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026. Searching all 13 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Jeep Wrangler Engine Cost — From $2,499 to $8,730