Vehicle-specific price guide

How much is a used Jeep Cherokee rear bumper assembly?

Asking prices from 752 salvage yards in 43 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 22, 2026
Strong coverage4,789 priced of 6,308 observed9 variantsMethodology v2.1 →

Part overview

About the Jeep Cherokee rear bumper assembly

What the rear bumper assembly does, common failure signs, and prices across all vehicles: used rear bumper assembly price guide →

Also known asRear Bumper CompleteRear Bumper with Reinforcement
Price summary

A used Jeep Cherokee rear bumper assembly costs $103 to $1,035, with a median asking price of $350. Based on 4,789 priced salvage yard listings across the US, compatible across 2014–2025 (11 model years), updated Sep 22, 2026. Prices exclude shipping, core charges, and installation.

Jeep Cherokee rear bumper assembly price snapshot

USD
Low
$103
Average
$377
High
$1,035
6,308 listings observed · 4,789 priced1mo ago· How we price·

Report incorrect price

Reporting price for Jeep Cherokee Rear Bumper Assembly

Reason

Regional supply

Where the Jeep Cherokee rear bumper assembly is listed

We found priced Jeep Cherokee rear bumper assembly listings at 752 salvage yards across 43 states. Texas supplies the most, with 609 listings (12% of the total) from 72 yards. Location matters: yards in Indiana ask a median $300, while Florida yards ask $440, 47% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Texas60972$324-7%
California54365$400+14%
Michigan46571$350
Illinois45342$331-5%
Indiana34630$300-14%
Florida23538$440+26%
Ohio22139$327-7%
Missouri20028$350

States with at least 10 priced listings. % is versus the $350 national median.

Replacement cost

What is the Jeep Cherokee rear bumper assembly replacement cost?

ESTIMATE
Used part
$350
Jeep Cherokee median asking price
Labor
$95–$375
1–2.5 hours at $95–$150/hr
Estimated total
$445–$725
median used part + labor

Labor is a typical independent-shop range for rear bumper assembly replacement, not a quote for your vehicle; it does not include paint and refinishing if not color-matched, and sensor recalibration if equipped. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Jeep Cherokee Rear Bumper Assembly

$

Current avg: $377 — we suggest $320 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2023)

w/o rear tow hook; dual exhaust, park assist, rear only48 listingsInterchange 2019–2021$362$160 – $607
w/o rear tow hook; dual exhaust, w/o park assist47 listingsInterchange 2019–2022$300$127 – $550
w/o rear tow hook; dual exhaust, park assist, front and rear46 listingsInterchange 2019–2023$424$166 – $631
rear tow hook, park assist, rear only44 listingsInterchange 2019–2021$390$106 – $494
rear tow hook, w/o park assist44 listingsInterchange 2019–2022$475$339 – $750
rear tow hook, park assist, front and rear42 listingsInterchange 2019–2023$400$175 – $600
w/o rear tow hook; single exhaust, park assist, rear only41 listingsInterchange 2019–2023$345$135 – $620
w/o rear tow hook; single exhaust, park assist, front and rear40 listingsInterchange 2019–2023$354$150 – $960
w/o rear tow hook; single exhaust, w/o park assist35 listingsInterchange 2019–2021$300$149 – $495

Model-year comparison

What does a Jeep Cherokee rear bumper assembly cost by year?

$270$308$345$383$420201520162017201820192020202120222023
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Jeep Cherokee rear bumper assembly cost?

Asking prices for a used Jeep Cherokee rear bumper assembly are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, w/o rear tow hook; dual exhaust, w/o park assist, lists at a $300 median, while rear tow hook, w/o park assist commands $475, a 58% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2015 units carry the lowest median at $300, while 2019 tops the table at $400. Parts from 2014–2018 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 5 compatible years.

Against comparable vehicles, the Jeep Cherokee sits 30% below the Ram 1500 ($497), 31% below the Dodge Durango ($505), and 29% below the Jeep Grand Cherokee ($495) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used rear bumper assembly: what to check

  1. Inspect internal reinforcement bar structure: Examine the inner metal crash bar for buckled steel, crushed crumple brackets, or hidden impact cracks behind the plastic shell.
  2. Verify sensor and blind-spot cutout options: Ensure the cover features the exact parking sensor hole count and internal blind-spot radar bracket mounts required by your trim.
  3. Check outer mounting tabs and guide slots: Broken fender-side attachment eyelets or torn diffuser clips will cause sagging body lines and uneven bumper gaps.
  4. Ask about intact wiring harness inclusion: Buying an assembly with the factory license plate light wiring and rear sensor harness intact saves tedious splicing time.
  5. Match exhaust tip cutout geometry: Single-outlet and dual-outlet bumper cutouts differ between engine options, so verify your tailpipe configuration before buying.

Keep browsing this vehicle

What other Jeep Cherokee parts are priced?

Price comparisons

Compare Jeep Cherokee rear bumper assembly prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Jeep Cherokee rear bumper assembly FAQ

How much is a used rear bumper assembly for a Jeep Cherokee?

The median asking price is $350 across 4,789 priced listings from 752 yards. 2018 is the cheapest model year we track, with a median of $300.

How much does it cost to replace a Jeep Cherokee rear bumper assembly?

Using a used part, a Jeep Cherokee rear bumper assembly replacement typically runs $445–$725 all-in: the median used rear bumper assembly for this model lists at $350, and independent-shop labor for rear bumper assembly replacement typically takes 1–2.5 hours at $95–$150/hr ($95–$375). The labor figure does not include paint and refinishing if not color-matched, and sensor recalibration if equipped. Labor is a national part-level estimate, not a quote for your vehicle.

Which Jeep Cherokee model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Jeep Cherokee rear bumper assembly years are interchangeable?

Salvage-yard interchange data links Jeep Cherokee rear bumper assembly fitments across 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2025. Searching all 11 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Jeep Cherokee Rear Bumper Assembly Cost — From $103 to $1,035