Vehicle-specific price guide

How much is a used Jeep Renegade rear bumper assembly?

Asking prices from 687 salvage yards in 48 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 29, 2026
Strong coverage2,017 priced of 2,563 observed4 variantsMethodology v2.1 →

Part overview

About the Jeep Renegade rear bumper assembly

What the rear bumper assembly does, common failure signs, and prices across all vehicles: used rear bumper assembly price guide →

Also known asRear Bumper CompleteRear Bumper with Reinforcement
Price summary

A used Jeep Renegade rear bumper assembly costs $100 to $1,045, with a median asking price of $325. Based on 2,017 priced salvage yard listings across the US, compatible across 2015–2024 (10 model years), updated Oct 29, 2026. Prices exclude shipping, core charges, and installation.

Jeep Renegade rear bumper assembly price snapshot

USD
Low
$100
Average
$358
High
$1,045
2,563 listings observed · 2,017 pricedUpdated 9h ago· How we price·

Report incorrect price

Reporting price for Jeep Renegade Rear Bumper Assembly

Reason

Regional supply

Where the Jeep Renegade rear bumper assembly is listed

We found priced Jeep Renegade rear bumper assembly listings at 687 salvage yards across 48 states. Michigan supplies the most, with 535 listings (10% of the total) from 52 yards. Location matters: yards in Ohio ask a median $300, while California yards ask $381, 27% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Michigan53552$320-2%
Ohio38140$300-8%
Illinois32232$300-8%
California31730$381+17%
Texas28639$350+8%
Indiana27425$300-8%
Missouri25826$300-8%
North Carolina24135$350+8%

States with at least 10 priced listings. % is versus the $325 national median.

Replacement cost

What is the Jeep Renegade rear bumper assembly replacement cost?

ESTIMATE
Used part
$325
Jeep Renegade median asking price
Labor
$95–$375
1–2.5 hours at $95–$150/hr
Estimated total
$420–$700
median used part + labor

Labor is a typical independent-shop range for rear bumper assembly replacement, not a quote for your vehicle; it does not include paint and refinishing if not color-matched, and sensor recalibration if equipped. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Jeep Renegade Rear Bumper Assembly

$

Current avg: $358 — we suggest $304 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2023)

w/o tow hook; w/o park assist49 listings$494$135 – $600
tow hook, w/o trailer hitch14 listings$335$215 – $795
tow hook, trailer hitch6 listings$606$462 – $658

w/o tow hook; park assist

1 listings
$650$650 – $650

Model-year comparison

What does a Jeep Renegade rear bumper assembly cost by year?

$264$325$387$449$51020152016201720182019202020212023
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Jeep Renegade rear bumper assembly cost?

Asking prices for a used Jeep Renegade rear bumper assembly are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, tow hook, w/o trailer hitch, lists at a $335 median, while w/o tow hook; park assist commands $650, a 94% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2015 units carry the lowest median at $293, while 2023 tops the table at $486. Parts from 2015–2018 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 4 compatible years.

Against comparable vehicles, the Jeep Renegade sits 35% below the Ram 1500 ($497), 36% below the Dodge Durango ($505), and 34% below the Jeep Grand Cherokee ($495) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used rear bumper assembly: what to check

  1. Inspect internal reinforcement bar structure: Examine the inner metal crash bar for buckled steel, crushed crumple brackets, or hidden impact cracks behind the plastic shell.
  2. Verify sensor and blind-spot cutout options: Ensure the cover features the exact parking sensor hole count and internal blind-spot radar bracket mounts required by your trim.
  3. Check outer mounting tabs and guide slots: Broken fender-side attachment eyelets or torn diffuser clips will cause sagging body lines and uneven bumper gaps.
  4. Ask about intact wiring harness inclusion: Buying an assembly with the factory license plate light wiring and rear sensor harness intact saves tedious splicing time.
  5. Match exhaust tip cutout geometry: Single-outlet and dual-outlet bumper cutouts differ between engine options, so verify your tailpipe configuration before buying.

Keep browsing this vehicle

What other Jeep Renegade parts are priced?

Price comparisons

Compare Jeep Renegade rear bumper assembly prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Jeep Renegade rear bumper assembly FAQ

How much is a used rear bumper assembly for a Jeep Renegade?

The median asking price is $325 across 2,017 priced listings from 687 yards. 2018 is the cheapest model year we track, with a median of $293.

How much does it cost to replace a Jeep Renegade rear bumper assembly?

Using a used part, a Jeep Renegade rear bumper assembly replacement typically runs $420–$700 all-in: the median used rear bumper assembly for this model lists at $325, and independent-shop labor for rear bumper assembly replacement typically takes 1–2.5 hours at $95–$150/hr ($95–$375). The labor figure does not include paint and refinishing if not color-matched, and sensor recalibration if equipped. Labor is a national part-level estimate, not a quote for your vehicle.

Which Jeep Renegade model years does this price guide cover?

This guide currently has year-level pricing for 2024, 2023, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Jeep Renegade rear bumper assembly years are interchangeable?

Salvage-yard interchange data links Jeep Renegade rear bumper assembly fitments across 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024. Searching all 10 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Jeep Renegade Rear Bumper Assembly Cost — From $100 to $1,045