Land Rover Defender rear bumper assembly price snapshot
- Low
- $1,099
- Average
- $1,554
- High
- $2,037
Vehicle-specific price guide
How much is a used Land Rover Defender rear bumper assembly?
Asking prices from 25 salvage yards in 12 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 14, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Land Rover Defender rear bumper assembly
What the rear bumper assembly does, common failure signs, and prices across all vehicles: used rear bumper assembly price guide →
Also known asRear Bumper CompleteRear Bumper with Reinforcement
Price summary
A used Land Rover Defender rear bumper assembly costs $1,099 to $2,037, with a median asking price of $1,480. Based on 166 priced salvage yard listings across the US, compatible across 2020–2025 (5 model years), updated Oct 14, 2026. Prices exclude shipping, core charges, and installation.
USD
Regional supply
Where the Land Rover Defender rear bumper assembly is listed
We found priced Land Rover Defender rear bumper assembly listings at 25 salvage yards across 12 states. Florida supplies the most, with 63 listings (34% of the total) from 6 yards. Location matters: yards in Michigan ask a median $425, while North Carolina yards ask $1,590, 274% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| Florida | 63 | 6 | $1,504+2% |
| South Carolina | 25 | 2 | $1,387-6% |
| North Carolina | 24 | 3 | $1,590+7% |
| Michigan | 19 | 2 | $425-71% |
| Texas | 15 | 4 | $1,450-2% |
States with at least 10 priced listings. % is versus the $1,480 national median.
Replacement cost
What is the Land Rover Defender rear bumper assembly replacement cost?
- Used part
- $1,480
- Land Rover Defender median asking price
- Labor
- $95–$375
- 1–2.5 hours at $95–$150/hr
- Estimated total
- $1,575–$1,855
- median used part + labor
Labor is a typical independent-shop range for rear bumper assembly replacement, not a quote for your vehicle; it does not include paint and refinishing if not color-matched, and sensor recalibration if equipped. The part price is the live median from the salvage-yard listings on this page. How we price
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a Land Rover Defender rear bumper assembly cost by year?
Market analysis
How much does a used Land Rover Defender rear bumper assembly cost?
Asking prices for a used Land Rover Defender rear bumper assembly sit in a fairly tight band around the $1,480 median, so most quotes far outside it deserve a second look.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, w/o tow package, lists at a $1,450 median, while tow package commands $1,574, a 9% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2020 units carry the lowest median at $1,475, while 2022 tops the table at $1,539. Parts from 2020–2023 are interchangeable, so if the 2020 fits your vehicle, it offers the best value across 4 compatible years.
Against comparable vehicles, the Land Rover Defender sits 198% above the Ram 1500 ($497), 193% above the Dodge Durango ($505), and 199% above the Jeep Grand Cherokee ($495) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used rear bumper assembly: what to check
- Inspect internal reinforcement bar structure: Examine the inner metal crash bar for buckled steel, crushed crumple brackets, or hidden impact cracks behind the plastic shell.
- Verify sensor and blind-spot cutout options: Ensure the cover features the exact parking sensor hole count and internal blind-spot radar bracket mounts required by your trim.
- Check outer mounting tabs and guide slots: Broken fender-side attachment eyelets or torn diffuser clips will cause sagging body lines and uneven bumper gaps.
- Ask about intact wiring harness inclusion: Buying an assembly with the factory license plate light wiring and rear sensor harness intact saves tedious splicing time.
- Match exhaust tip cutout geometry: Single-outlet and dual-outlet bumper cutouts differ between engine options, so verify your tailpipe configuration before buying.
Keep browsing this vehicle
What other Land Rover Defender parts are priced?
01wide ±70%
Brake Caliper
$263median
$125$493
02wide ±129%
Wheels
$390median
$145$1,150
03wide ±155%
Transmission Control Module
$208median
$35$681
04wide ±211%
Axle Shaft
$166median
$50$750
05wide ±79%
Steering Wheel
$482median
$200$962
06wide ±80%
Headlight Assembly
$743median
$450$1,640
07wide ±66%
Front Seat
$334median
$185$624
08wide ±232%
Alternator
$106median
$25$517
09wide ±230%
Fuel Pump
$130median
$25$624
10wide ±78%
Tail Light
$360median
$126$684
11wide ±213%
Water Pump
$157median
$30$699
12spread ±41%
Air Bag
$324median
$210$475
Price comparisons
Compare Land Rover Defender rear bumper assembly prices
Rear Bumper Assemblycompare
Ram1500vsLandRoverDefender
1500$497
Defender$1,480
$983 diff7,264 listings
Rear Bumper AssemblycompareDodgeDurangovsLandRoverDefender
Durango$505
Defender$1,480
$975 diff6,888 listings
Rear Bumper AssemblycompareJeepGrandCherokeevsLandRoverDefender
Cherokee$495
Defender$1,480
$985 diff6,868 listings
Rear Bumper AssemblycompareFordF150vsLandRoverDefender
F150$560
Defender$1,480
$920 diff5,719 listings
Rear Bumper AssemblycompareJeepCherokeevsLandRoverDefender
Cherokee$350
Defender$1,480
$1,130 diff4,955 listings
Rear Bumper AssemblycompareFordEdgevsLandRoverDefender
Edge$505
Defender$1,480
$975 diff4,679 listings
Compare fitments
What do similar vehicles charge for this part?
Acurawide ±71%
Acura ILX
$445median
$150$784
Acurawide ±71%
Acura Integra
$540median
$230$1,000
Acurawide ±80%
Acura MDX
$800median
$165$1,449
Acurawide ±125%
Acura RDX
$500median
$119$1,365
Acurawide ±148%
Acura TLX
$520median
$125$1,661
Audiwide ±133%
Audi A4
$700median
$125$1,990
Audiwide ±163%
Audi A6
$799median
$148$2,750
Audiwide ±133%
Audi Q3
$800median
$170$2,300
Land Roverwide ±88%
Land Rover Discovery
$800median
$345$1,750
Land Roverwide ±144%
Land Rover Discovery Sport
$502median
$125$1,574
Land Roverwide ±201%
Land Rover Range Rover
$585median
$150$2,500
Land Roverwide ±237%
Land Rover Range Rover Sport
$550median
$89$2,699
Common questions
Land Rover Defender rear bumper assembly FAQ
How much is a used rear bumper assembly for a Land Rover Defender?
The median asking price is $1,480 across 166 priced listings from 25 yards. 2020 is the cheapest model year we track, with a median of $1,475.
How much does it cost to replace a Land Rover Defender rear bumper assembly?
Using a used part, a Land Rover Defender rear bumper assembly replacement typically runs $1,575–$1,855 all-in: the median used rear bumper assembly for this model lists at $1,480, and independent-shop labor for rear bumper assembly replacement typically takes 1–2.5 hours at $95–$150/hr ($95–$375). The labor figure does not include paint and refinishing if not color-matched, and sensor recalibration if equipped. Labor is a national part-level estimate, not a quote for your vehicle.
Which Land Rover Defender model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Land Rover Defender rear bumper assembly years are interchangeable?
Salvage-yard interchange data links Land Rover Defender rear bumper assembly fitments across 2020, 2021, 2022, 2023, 2025. Searching all 5 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.