Vehicle-specific price guide

How much is a used Ram 3500 rear bumper assembly?

Asking prices from 311 salvage yards in 31 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 12, 2026
Strong coverage1,373 priced of 1,770 observed4 variantsMethodology v2.1 →

Part overview

About the Ram 3500 rear bumper assembly

What the rear bumper assembly does, common failure signs, and prices across all vehicles: used rear bumper assembly price guide →

Also known asRear Bumper CompleteRear Bumper with Reinforcement
Price summary

A used Ram 3500 rear bumper assembly costs $100 to $1,720, with a median asking price of $440. Based on 1,373 priced salvage yard listings across the US, compatible across 2011–2026 (16 model years), updated Oct 12, 2026. Prices exclude shipping, core charges, and installation.

Ram 3500 rear bumper assembly price snapshot

USD
Low
$100
Average
$477
High
$1,720
1,770 listings observed · 1,373 priced16d ago· How we price·

Report incorrect price

Reporting price for Ram 3500 Rear Bumper Assembly

Reason

Regional supply

Where the Ram 3500 rear bumper assembly is listed

We found priced Ram 3500 rear bumper assembly listings at 311 salvage yards across 31 states. California supplies the most, with 299 listings (22% of the total) from 43 yards. Location matters: yards in Colorado ask a median $275, while Arizona yards ask $550, 100% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California29943$405-8%
Florida17425$436-1%
Texas17050$385-12%
South Carolina13910$550+25%
Georgia10019$468+6%
Arizona7911$550+25%
Michigan6831$450+2%
Colorado6113$275-37%

States with at least 10 priced listings. % is versus the $440 national median.

Replacement cost

What is the Ram 3500 rear bumper assembly replacement cost?

ESTIMATE
Used part
$440
Ram 3500 median asking price
Labor
$95–$375
1–2.5 hours at $95–$150/hr
Estimated total
$535–$815
median used part + labor

Labor is a typical independent-shop range for rear bumper assembly replacement, not a quote for your vehicle; it does not include paint and refinishing if not color-matched, and sensor recalibration if equipped. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Ram 3500 Rear Bumper Assembly

$

Current avg: $477 — we suggest $405 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

(step bumper), painted, w/o park assist44 listingsInterchange 2019–2024$385$175 – $678
(step bumper), chrome, park assist39 listingsInterchange 2019–2026$515$145 – $928
(step bumper), painted, park assist31 listingsInterchange 2019–2026$374$100 – $850
(step bumper), chrome, w/o park assist30 listingsInterchange 2019–2026$470$153 – $830

Model-year comparison

What does a Ram 3500 rear bumper assembly cost by year?

$261$368$474$581$6882015201620172018201920202021202220242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Ram 3500 rear bumper assembly cost?

Asking prices for a used Ram 3500 rear bumper assembly are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, (step bumper), painted, park assist, lists at a $374 median, while (step bumper), chrome, park assist commands $515, a 38% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2018 units carry the lowest median at $290, while 2021 tops the table at $655. Parts from 2013–2018 are interchangeable, so if the 2018 fits your vehicle, it offers the best value across 6 compatible years.

Against comparable vehicles, the Ram 3500 sits 11% below the Ram 1500 ($497), 13% below the Dodge Durango ($505), and 11% below the Jeep Grand Cherokee ($495) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used rear bumper assembly: what to check

  1. Inspect internal reinforcement bar structure: Examine the inner metal crash bar for buckled steel, crushed crumple brackets, or hidden impact cracks behind the plastic shell.
  2. Verify sensor and blind-spot cutout options: Ensure the cover features the exact parking sensor hole count and internal blind-spot radar bracket mounts required by your trim.
  3. Check outer mounting tabs and guide slots: Broken fender-side attachment eyelets or torn diffuser clips will cause sagging body lines and uneven bumper gaps.
  4. Ask about intact wiring harness inclusion: Buying an assembly with the factory license plate light wiring and rear sensor harness intact saves tedious splicing time.
  5. Match exhaust tip cutout geometry: Single-outlet and dual-outlet bumper cutouts differ between engine options, so verify your tailpipe configuration before buying.

Keep browsing this vehicle

What other Ram 3500 parts are priced?

Price comparisons

Compare Ram 3500 rear bumper assembly prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Ram 3500 rear bumper assembly FAQ

How much is a used rear bumper assembly for a Ram 3500?

The median asking price is $440 across 1,373 priced listings from 311 yards. 2018 is the cheapest model year we track, with a median of $290.

How much does it cost to replace a Ram 3500 rear bumper assembly?

Using a used part, a Ram 3500 rear bumper assembly replacement typically runs $535–$815 all-in: the median used rear bumper assembly for this model lists at $440, and independent-shop labor for rear bumper assembly replacement typically takes 1–2.5 hours at $95–$150/hr ($95–$375). The labor figure does not include paint and refinishing if not color-matched, and sensor recalibration if equipped. Labor is a national part-level estimate, not a quote for your vehicle.

Which Ram 3500 model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Ram 3500 rear bumper assembly years are interchangeable?

Salvage-yard interchange data links Ram 3500 rear bumper assembly fitments across 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026. Searching all 16 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Ram 3500 Rear Bumper Assembly Cost — From $100 to $1,720