Ram 3500 drive shaft price snapshot
- Low
- $98
- Average
- $489
- High
- $1,776
Vehicle-specific price guide
How much is a used Ram 3500 drive shaft?
Asking prices from 535 salvage yards in 47 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 17, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Ram 3500 drive shaft
What the drive shaft does, common failure signs, and prices across all vehicles: used drive shaft price guide →
Also known asDriveshaftPropeller ShaftProp Shaft
Price summary
A used Ram 3500 drive shaft costs $98 to $1,776, with a median asking price of $431. Based on 7,298 priced salvage yard listings across the US, compatible across 2012–2026 (15 model years), updated Oct 17, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$461
Grade B (good)$395
Grade C (fair)$355
USD
Condition comparison
Price by part grade
Grade AClean / low wear$112–$1,7764,276 listings
Grade BStandard used$98–$9502,187 listings
Grade CVisible wear$141–$849376 listings
Grade XUngraded$100–$1,207459 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $112–$1,776 | 4,276 | |
| Grade BStandard used | $98–$950 | 2,187 | |
| Grade CVisible wear | $141–$849 | 376 | |
| Grade XUngraded | $100–$1,207 | 459 |
Median by grade
Grade price comparison
Grade A$461
Grade B$395
Grade C$355
Ungraded$350
Median asking price by seller-reported condition grade · $98–$1,776 overall range
Regional supply
Where the Ram 3500 drive shaft is listed
We found priced Ram 3500 drive shaft listings at 535 salvage yards across 47 states. Texas supplies the most, with 786 listings (11% of the total) from 42 yards. Location matters: yards in Missouri ask a median $395, while Illinois yards ask $696, 76% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| Texas | 786 | 42 | $428-1% |
| Michigan | 665 | 28 | $545+26% |
| Missouri | 641 | 16 | $395-8% |
| Illinois | 564 | 23 | $696+61% |
| South Carolina | 437 | 11 | $500+16% |
| Wisconsin | 365 | 18 | $676+57% |
| Pennsylvania | 352 | 18 | $500+16% |
| North Carolina | 348 | 26 | $408-5% |
States with at least 10 priced listings. % is versus the $431 national median.
Replacement cost
What is the Ram 3500 drive shaft replacement cost?
- Used part
- $431
- Ram 3500 median asking price
- Labor
- $95–$450
- 1–3 hours at $95–$150/hr
- Estimated total
- $525–$880
- median used part + labor
Labor is a typical independent-shop range for drive shaft replacement, not a quote for your vehicle. The part price is the live median from the salvage-yard listings on this page. Full drive shaft replacement cost breakdown
Sources
- Labor time estimates: Part Price Guide labor database
4x4, Pickup, 1 piece drive shaft, diesel, SRW, Crew Cab
3 listings$600$421 – $9004x4, Chassis Cab, 2 piece drive shaft, diesel, DRW, 172.40" WB
2 listings$745$745 – $7454x2, Pickup, gasoline, Standard Cab
1 listings$474$474 – $474Model-year comparison
What does a Ram 3500 drive shaft cost by year?
202531 listingsFits 2 years$949$353 – $1,2882024924 listingsFits 6 years$440$112 – $1,3122023960 listingsFits 6 years$429$120 – $1,3122022526 listingsFits 6 years$441$112 – $1,3122021970 listingsFits 6 years$459$113 – $1,3122020969 listingsFits 6 years$450$113 – $1,3122019569 listingsFits 6 years$462$113 – $1,31220181,012 listingsFits 7 years$400$98 – $1,62820171,012 listingsFits 7 years$408$98 – $1,7762016724 listingsFits 7 years$400$98 – $1,2482015866 listingsFits 7 years$418$98 – $1,761
Market analysis
How much does a used Ram 3500 drive shaft cost?
Asking prices for a used Ram 3500 drive shaft are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 30% premium over grade-C stock, with grade-A medians at $461.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 4x2, Pickup, gasoline, Standard Cab, lists at a $474 median, while 4x4, Pickup, 2 piece drive shaft, diesel, SRW commands $1,038, a 119% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2016 units carry the lowest median at $400, while 2025 tops the table at $949. Parts from 2012–2018 are interchangeable, so if the 2016 fits your vehicle, it offers the best value across 7 compatible years.
Against comparable vehicles, the Ram 3500 sits 127% above the Ram 1500 ($190), 89% above the Chevy Silverado 1500 ($228), and 77% above the GMC Sierra 1500 ($243) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used drive shaft: what to check
- Flex universal joints and CV boots: Articulate each U-joint by hand to check for stiff binding, rusted needle bearings, or torn rubber constant-velocity boots.
- Inspect slip yoke splines and balance weights: Check male splines for twisting or galling, and verify that welded steel balance weights are present along the tube.
- Examine center carrier bearing rubber: Inspect two-piece driveshaft center bearings for cracked rubber mounting rings or noisy, dry support bearings.
- Measure overall compressed length: Verify flange-to-flange operating length exactly, as transmission options and wheelbase variations alter shaft dimensions.
- Index flange alignment before installation: Mark mating yokes to the differential flange before installation to prevent high-speed driveline vibration.
Keep browsing this vehicle
What other Ram 3500 parts are priced?
01wide ±171%
Transmission Control Module
$153median
$38$562
02wide ±286%
Wheels
$250median
$50$1,480
03wide ±201%
Grille
$620median
$102$2,600
04wide ±236%
Front Seat
$211median
$50$1,048
05wide ±246%
Side Mirror
$334median
$59$1,700
06wide ±219%
Transfer Case
$1,005median
$200$4,592
07wide ±280%
Car Radio
$170median
$35$987
08wide ±123%
Quarter Panel
$511median
$185$1,437
09wide ±147%
Transmission
$3,444median
$830$10,945
10wide ±155%
Fuel Tank
$241median
$75$820
11wide ±107%
Door Assembly
$695median
$116$1,601
12wide ±153%
Steering Column
$194median
$50$645
Price comparisons
Compare Ram 3500 drive shaft prices
Drive Shaftcompare
Ram1500vsRam3500
1500$190
3500$431
$241 diff27,061 listings
Drive ShaftcompareChevySilverado1500vsRam3500
1500$228
3500$431
$203 diff26,275 listings
Drive ShaftcompareGMCSierra1500vsRam3500
1500$243
3500$431
$188 diff22,830 listings
Drive ShaftcompareFordF150vsRam3500
F150$240
3500$431
$191 diff21,224 listings
Drive ShaftcompareFordF250vsRam3500
F250$285
3500$431
$146 diff17,061 listings
Drive ShaftcompareRam3500vsRam2500
3500$431
2500$295
$136 diff12,863 listings
Compare fitments
What do similar vehicles charge for this part?
Acurawide ±154%
Acura MDX
$232median
$75$788
Acurawide ±113%
Acura RDX
$173median
$60$450
Acurawide ±233%
Acura TLX
$209median
$60$1,036
Audiwide ±124%
Audi A4
$170median
$50$470
Audiwide ±142%
Audi A6
$180median
$54$566
Audiwide ±116%
Audi Q3
$186median
$65$495
Audiwide ±194%
Audi Q5
$269median
$55$1,100
Audiwide ±110%
Audi Q7
$300median
$81$740
BMWwide ±145%
BMW 330i
$250median
$76$800
BMWwide ±175%
BMW 530i
$250median
$70$947
Ramwide ±192%
Ram 1500
$190median
$47$777
Ramwide ±200%
Ram 2500
$295median
$70$1,248
Common questions
Ram 3500 drive shaft FAQ
How much is a used drive shaft for a Ram 3500?
The median asking price is $431 across 7,298 priced listings from 535 yards. Grade-A units, the cleanest stock, have a median of $461. 2018 is the cheapest model year we track, with a median of $400.
How much does it cost to replace a Ram 3500 drive shaft?
Using a used part, a Ram 3500 drive shaft replacement typically runs $525–$880 all-in: the median used drive shaft for this model lists at $431, and independent-shop labor for drive shaft replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). Labor is a national part-level estimate, not a quote for your vehicle.
Which Ram 3500 model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Ram 3500 drive shaft years are interchangeable?
Salvage-yard interchange data links Ram 3500 drive shaft fitments across 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026. Searching all 15 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.