Vehicle-specific price guide

How much is a used Subaru Outback rear bumper assembly?

Asking prices from 244 salvage yards in 33 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 23, 2026
Strong coverage736 priced of 967 observed2 variantsMethodology v2.1 →

Part overview

About the Subaru Outback rear bumper assembly

What the rear bumper assembly does, common failure signs, and prices across all vehicles: used rear bumper assembly price guide →

Also known asRear Bumper CompleteRear Bumper with Reinforcement
Price summary

A used Subaru Outback rear bumper assembly costs $99 to $750, with a median asking price of $271. Based on 736 priced salvage yard listings across the US, compatible across 2012–2025 (13 model years), updated Sep 23, 2026. Prices exclude shipping, core charges, and installation.

Subaru Outback rear bumper assembly price snapshot

USD
Low
$99
Average
$297
High
$750
967 listings observed · 736 priced1mo ago· How we price·

Report incorrect price

Reporting price for Subaru Outback Rear Bumper Assembly

Reason

Regional supply

Where the Subaru Outback rear bumper assembly is listed

We found priced Subaru Outback rear bumper assembly listings at 244 salvage yards across 33 states. California supplies the most, with 136 listings (17% of the total) from 24 yards. Location matters: yards in Florida ask a median $212, while Michigan yards ask $315, 49% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California13624$300+11%
Texas13322$310+14%
Michigan6925$315+16%
Florida5525$212-22%
Colorado486$267-1%
Wisconsin4019$218-20%
Georgia3414$235-13%
Indiana3415$292+8%

States with at least 10 priced listings. % is versus the $271 national median.

Replacement cost

What is the Subaru Outback rear bumper assembly replacement cost?

ESTIMATE
Used part
$271
Subaru Outback median asking price
Labor
$95–$375
1–2.5 hours at $95–$150/hr
Estimated total
$365–$645
median used part + labor

Labor is a typical independent-shop range for rear bumper assembly replacement, not a quote for your vehicle; it does not include paint and refinishing if not color-matched, and sensor recalibration if equipped. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Subaru Outback Rear Bumper Assembly

$

Current avg: $297 — we suggest $252 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

Model-year comparison

What does a Subaru Outback rear bumper assembly cost by year?

$203$304$406$508$61020152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Subaru Outback rear bumper assembly cost?

Asking prices for a used Subaru Outback rear bumper assembly are unusually spread out: the top listing asks about 8 times what the cheapest does, so which unit you pick matters more than the median.

Model year matters too: 2015 units carry the lowest median at $225, while 2025 tops the table at $581. Parts from 2012–2016 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 5 compatible years.

Against comparable vehicles, the Subaru Outback sits 45% below the Ram 1500 ($497), 46% below the Dodge Durango ($505), and 45% below the Jeep Grand Cherokee ($495) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used rear bumper assembly: what to check

  1. Inspect internal reinforcement bar structure: Examine the inner metal crash bar for buckled steel, crushed crumple brackets, or hidden impact cracks behind the plastic shell.
  2. Verify sensor and blind-spot cutout options: Ensure the cover features the exact parking sensor hole count and internal blind-spot radar bracket mounts required by your trim.
  3. Check outer mounting tabs and guide slots: Broken fender-side attachment eyelets or torn diffuser clips will cause sagging body lines and uneven bumper gaps.
  4. Ask about intact wiring harness inclusion: Buying an assembly with the factory license plate light wiring and rear sensor harness intact saves tedious splicing time.
  5. Match exhaust tip cutout geometry: Single-outlet and dual-outlet bumper cutouts differ between engine options, so verify your tailpipe configuration before buying.

Keep browsing this vehicle

What other Subaru Outback parts are priced?

Price comparisons

Compare Subaru Outback rear bumper assembly prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Subaru Outback rear bumper assembly FAQ

How much is a used rear bumper assembly for a Subaru Outback?

The median asking price is $271 across 736 priced listings from 244 yards. 2016 is the cheapest model year we track, with a median of $225.

How much does it cost to replace a Subaru Outback rear bumper assembly?

Using a used part, a Subaru Outback rear bumper assembly replacement typically runs $365–$645 all-in: the median used rear bumper assembly for this model lists at $271, and independent-shop labor for rear bumper assembly replacement typically takes 1–2.5 hours at $95–$150/hr ($95–$375). The labor figure does not include paint and refinishing if not color-matched, and sensor recalibration if equipped. Labor is a national part-level estimate, not a quote for your vehicle.

Which Subaru Outback model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Subaru Outback rear bumper assembly years are interchangeable?

Salvage-yard interchange data links Subaru Outback rear bumper assembly fitments across 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2025. Searching all 13 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Subaru Outback Rear Bumper Assembly Cost — From $99 to $750