Subaru WRX rear bumper assembly price snapshot
- Low
- $143
- Average
- $378
- High
- $903
Vehicle-specific price guide
How much is a used Subaru WRX rear bumper assembly?
Asking prices from 358 salvage yards in 41 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 28, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Subaru WRX rear bumper assembly
What the rear bumper assembly does, common failure signs, and prices across all vehicles: used rear bumper assembly price guide →
Also known asRear Bumper CompleteRear Bumper with Reinforcement
Price summary
A used Subaru WRX rear bumper assembly costs $143 to $903, with a median asking price of $353. Based on 511 priced salvage yard listings across the US, compatible across 2015–2025 (11 model years), updated Oct 28, 2026. Prices exclude shipping, core charges, and installation.
USD
Regional supply
Where the Subaru WRX rear bumper assembly is listed
We found priced Subaru WRX rear bumper assembly listings at 358 salvage yards across 41 states. Pennsylvania supplies the most, with 138 listings (9% of the total) from 20 yards. Location matters: yards in California ask a median $235, while New York yards ask $439, 87% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| Pennsylvania | 138 | 20 | $342-3% |
| California | 137 | 27 | $235-33% |
| Michigan | 126 | 27 | $281-20% |
| New York | 91 | 20 | $439+24% |
| New Jersey | 76 | 14 | $350-1% |
| Illinois | 63 | 12 | $372+5% |
| Texas | 58 | 15 | $295-16% |
| Ohio | 54 | 16 | $366+4% |
States with at least 10 priced listings. % is versus the $353 national median.
Replacement cost
What is the Subaru WRX rear bumper assembly replacement cost?
- Used part
- $353
- Subaru WRX median asking price
- Labor
- $95–$375
- 1–2.5 hours at $95–$150/hr
- Estimated total
- $450–$730
- median used part + labor
Labor is a typical independent-shop range for rear bumper assembly replacement, not a quote for your vehicle; it does not include paint and refinishing if not color-matched, and sensor recalibration if equipped. The part price is the live median from the salvage-yard listings on this page. How we price
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a Subaru WRX rear bumper assembly cost by year?
Market analysis
How much does a used Subaru WRX rear bumper assembly cost?
Asking prices for a used Subaru WRX rear bumper assembly are unusually spread out: the top listing asks about 6 times what the cheapest does, so which unit you pick matters more than the median.
Model year matters too: 2015 units carry the lowest median at $290, while 2025 tops the table at $500. Year-level pages linked in the table above break each one down by grade and variant.
Against comparable vehicles, the Subaru WRX sits 29% below the Ram 1500 ($497), 30% below the Dodge Durango ($505), and 29% below the Jeep Grand Cherokee ($495) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used rear bumper assembly: what to check
- Inspect internal reinforcement bar structure: Examine the inner metal crash bar for buckled steel, crushed crumple brackets, or hidden impact cracks behind the plastic shell.
- Verify sensor and blind-spot cutout options: Ensure the cover features the exact parking sensor hole count and internal blind-spot radar bracket mounts required by your trim.
- Check outer mounting tabs and guide slots: Broken fender-side attachment eyelets or torn diffuser clips will cause sagging body lines and uneven bumper gaps.
- Ask about intact wiring harness inclusion: Buying an assembly with the factory license plate light wiring and rear sensor harness intact saves tedious splicing time.
- Match exhaust tip cutout geometry: Single-outlet and dual-outlet bumper cutouts differ between engine options, so verify your tailpipe configuration before buying.
Keep browsing this vehicle
What other Subaru WRX parts are priced?
01wide ±211%
Transmission Control Module
$136median
$30$605
02wide ±139%
Side Mirror
$170median
$50$522
03wide ±193%
Wheels
$175median
$39$713
04wide ±113%
Steering Column
$204median
$52$511
05wide ±159%
Car Radio
$204median
$60$707
06wide ±162%
Strut
$135median
$35$472
07wide ±105%
Center Console
$173median
$45$410
08wide ±372%
Brake Caliper
$100median
$22$766
09wide ±176%
Air Bag
$221median
$40$819
10wide ±178%
Intake Manifold
$125median
$25$470
11wide ±118%
Headlight Assembly
$611median
$115$1,560
12wide ±142%
Front Seat
$255median
$74$800
Price comparisons
Compare Subaru WRX rear bumper assembly prices
Rear Bumper Assemblycompare
Ram1500vsSubaruWRX
1500$497
WRX$353
$144 diff7,609 listings
Rear Bumper AssemblycompareDodgeDurangovsSubaruWRX
Durango$505
WRX$353
$152 diff7,233 listings
Rear Bumper AssemblycompareJeepGrandCherokeevsSubaruWRX
Cherokee$495
WRX$353
$142 diff7,213 listings
Rear Bumper AssemblycompareFordF150vsSubaruWRX
F150$560
WRX$353
$207 diff6,064 listings
Rear Bumper AssemblycompareJeepCherokeevsSubaruWRX
Cherokee$350
WRX$353
$3 diff5,300 listings
Rear Bumper AssemblycompareFordEdgevsSubaruWRX
Edge$505
WRX$353
$152 diff5,024 listings
Compare fitments
What do similar vehicles charge for this part?
Acurawide ±71%
Acura ILX
$445median
$150$784
Acurawide ±71%
Acura Integra
$540median
$230$1,000
Acurawide ±80%
Acura MDX
$800median
$165$1,449
Acurawide ±125%
Acura RDX
$500median
$119$1,365
Acurawide ±148%
Acura TLX
$520median
$125$1,661
Audiwide ±133%
Audi A4
$700median
$125$1,990
Audiwide ±163%
Audi A6
$799median
$148$2,750
Subaruwide ±82%
Subaru Ascent
$425median
$150$847
Subaruwide ±78%
Subaru Crosstrek
$400median
$120$745
Subaruwide ±108%
Subaru Forester
$425median
$150$1,069
Subaruwide ±142%
Subaru Impreza
$300median
$100$950
Subaruwide ±120%
Subaru Outback
$271median
$99$750
Common questions
Subaru WRX rear bumper assembly FAQ
How much is a used rear bumper assembly for a Subaru WRX?
The median asking price is $353 across 511 priced listings from 358 yards. 2015 is the cheapest model year we track, with a median of $290.
How much does it cost to replace a Subaru WRX rear bumper assembly?
Using a used part, a Subaru WRX rear bumper assembly replacement typically runs $450–$730 all-in: the median used rear bumper assembly for this model lists at $353, and independent-shop labor for rear bumper assembly replacement typically takes 1–2.5 hours at $95–$150/hr ($95–$375). The labor figure does not include paint and refinishing if not color-matched, and sensor recalibration if equipped. Labor is a national part-level estimate, not a quote for your vehicle.
Which Subaru WRX model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2022, 2021, 2019, 2018, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Subaru WRX rear bumper assembly years are interchangeable?
Salvage-yard interchange data links Subaru WRX rear bumper assembly fitments across 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 11 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.