Mitsubishi Outlander rear bumper price snapshot
- Low
- $75
- Average
- $220
- High
- $570
Vehicle-specific price guide
How much is a used Mitsubishi Outlander rear bumper?
Asking prices from 85 salvage yards in 28 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 12, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Mitsubishi Outlander rear bumper
What the rear bumper does, common failure signs, and prices across all vehicles: used rear bumper price guide →
Also known asRear Bumper Cover
Price summary
A used Mitsubishi Outlander rear bumper costs $75 to $570, with a median asking price of $225. Based on 348 priced salvage yard listings across the US, compatible across 2014–2025 (11 model years), updated Oct 12, 2026. Prices exclude shipping, core charges, and installation.
USD
Regional supply
Where the Mitsubishi Outlander rear bumper is listed
We found priced Mitsubishi Outlander rear bumper listings at 85 salvage yards across 28 states. Tennessee supplies the most, with 95 listings (27% of the total) from 2 yards. Location matters: yards in Tennessee ask a median $75, while California yards ask $370, 393% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| Tennessee | 95 | 2 | $75-67% |
| Texas | 40 | 7 | $250+11% |
| Michigan | 26 | 7 | $290+29% |
| California | 24 | 7 | $370+64% |
| Ohio | 22 | 7 | $262+16% |
| Pennsylvania | 20 | 9 | $225 |
| Minnesota | 20 | 3 | $230+2% |
| Virginia | 11 | 1 | $104-54% |
States with at least 10 priced listings. % is versus the $225 national median.
Replacement cost
What is the Mitsubishi Outlander rear bumper replacement cost?
- Used part
- $225
- Mitsubishi Outlander median asking price
- Labor
- $145–$450
- 1.5–3 hours at $95–$150/hr
- Estimated total
- $370–$675
- median used part + labor
Labor is a typical independent-shop range for rear bumper replacement, not a quote for your vehicle; it does not include paint and blending if the cover isn't color-matched, and sensor recalibration on park-assist trims. The part price is the live median from the salvage-yard listings on this page. How we price
Sources
- Labor time estimates: Part Price Guide labor database
plug-in hybrid, upper
4 listingsInterchange 2022–2025$298$125 – $570plug-in hybrid, lower
2 listingsInterchange 2023–2025$175$166 – $175gasoline, lower
1 listings$155$155 – $155gasoline, upper
1 listings$490$490 – $490Model-year comparison
What does a Mitsubishi Outlander rear bumper cost by year?
202514 listingsFits 3 years$298$125 – $57020249 listingsFits 4 years$262$125 – $57020239 listingsFits 3 years$281$125 – $570202233 listingsFits 6 years$229$80 – $390202117 listingsFits 5 years$235$100 – $390202085 listingsFits 7 years$200$75 – $420201987 listingsFits 7 years$99$75 – $555201884 listingsFits 7 years$265$75 – $502201764 listingsFits 5 years$247$75 – $455201670 listingsFits 5 years$250$75 – $416201565 listingsFits 2 years$237$78 – $421
Market analysis
How much does a used Mitsubishi Outlander rear bumper cost?
Asking prices for a used Mitsubishi Outlander rear bumper are unusually spread out: the top listing asks about 8 times what the cheapest does, so which unit you pick matters more than the median.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, gasoline, lower, lists at a $155 median, while gasoline, upper commands $490, a 216% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2019 units carry the lowest median at $99, while 2025 tops the table at $298. Parts from 2016–2022 are interchangeable, so if the 2019 fits your vehicle, it offers the best value across 7 compatible years.
Against comparable vehicles, the Mitsubishi Outlander sits 8% below the Jeep Grand Cherokee ($245), 1% below the Ford Explorer ($227), and 14% below the Ford Edge ($262) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used rear bumper: what to check
- Inspect for previous repair filler. Thick paint or ripples signal a prior hit.
- Verify sensor cutouts match your trim's park-assist configuration.
- Confirm the paint code if you want to skip repainting.
- Check that the yard includes mounting hardware; clips are often broken during removal.
Keep browsing this vehicle
What other Mitsubishi Outlander parts are priced?
01wide ±151%
Air Bag
$275median
$50$883
02wide ±204%
Axle Shaft
$125median
$25$535
03wide ±170%
Transmission Control Module
$150median
$34$545
04wide ±219%
Front Seat
$153median
$35$705
05wide ±180%
Side Mirror
$225median
$40$850
06wide ±83%
Door Assembly
$833median
$139$1,522
07wide ±186%
Tail Light
$163median
$40$645
08wide ±238%
Brake Caliper
$85median
$15$420
09wide ±237%
Steering Wheel
$188median
$40$932
10wide ±167%
Transmission
$1,495median
$250$5,248
11wide ±111%
Headlight Assembly
$600median
$100$1,430
12wide ±255%
Car Radio
$230median
$48$1,223
Price comparisons
Compare Mitsubishi Outlander rear bumper prices
Rear Bumpercompare
JeepGrandCherokeevsMitsubishiOutlander
Cherokee$245
Outlander$225
$20 diff4,078 listings
Rear BumpercompareFordExplorervsMitsubishiOutlander
Explorer$227
Outlander$225
$2 diff3,341 listings
Rear BumpercompareFordEdgevsMitsubishiOutlander
Edge$262
Outlander$225
$37 diff3,190 listings
Rear BumpercompareJeepCherokeevsMitsubishiOutlander
Cherokee$197
Outlander$225
$28 diff2,894 listings
Rear BumpercompareChevyEquinoxvsMitsubishiOutlander
Equinox$244
Outlander$225
$19 diff2,799 listings
Rear BumpercompareToyota4RunnervsMitsubishiOutlander
4Runner$195
Outlander$225
$30 diff2,665 listings
Compare fitments
What do similar vehicles charge for this part?
BMWwide ±112%
BMW X3
$579median
$100$1,395
BMWwide ±149%
BMW X5
$450median
$80$1,425
Chevywide ±171%
Chevy Equinox
$244median
$60$895
Chevywide ±148%
Chevy Malibu
$243median
$49$767
Chevywide ±255%
Chevy Silverado 1500
$325median
$80$1,735
Chevywide ±175%
Chevy Tahoe
$320median
$80$1,200
Chevywide ±142%
Chevy Traverse
$237median
$75$750
Dodgewide ±106%
Dodge Challenger
$350median
$150$895
Dodgewide ±210%
Dodge Charger
$228median
$39$995
Dodgewide ±181%
Dodge Durango
$255median
$70$995
Fordwide ±140%
Ford Edge
$262median
$67$800
Fordwide ±187%
Ford Escape
$250median
$70$1,005
Common questions
Mitsubishi Outlander rear bumper FAQ
How much is a used rear bumper for a Mitsubishi Outlander?
The median asking price is $225 across 348 priced listings from 85 yards. 2019 is the cheapest model year we track, with a median of $99.
How much does it cost to replace a Mitsubishi Outlander rear bumper?
Using a used part, a Mitsubishi Outlander rear bumper replacement typically runs $370–$675 all-in: the median used rear bumper for this model lists at $225, and independent-shop labor for rear bumper replacement typically takes 1.5–3 hours at $95–$150/hr ($145–$450). The labor figure does not include paint and blending if the cover isn't color-matched, and sensor recalibration on park-assist trims. Labor is a national part-level estimate, not a quote for your vehicle.
Which Mitsubishi Outlander model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Mitsubishi Outlander rear bumper years are interchangeable?
Salvage-yard interchange data links Mitsubishi Outlander rear bumper fitments across 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2025. Searching all 11 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.