Used Volvo XC90 fender from a salvage yard

Vehicle-specific price guide

How much is a used Volvo XC90 fender?

Asking prices from 165 salvage yards in 30 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 17, 2026
Strong coverage964 priced of 1,174 observed3 variantsMethodology v2.1 →

Part overview

About the Volvo XC90 fender

What the fender does, common failure signs, and prices across all vehicles: used fender price guide →

Also known asFront FenderFender Panel
Price summary

A used Volvo XC90 fender costs $60 to $950, with a median asking price of $250. Based on 964 priced salvage yard listings across the US, compatible across 2016–2025 (10 model years), updated Oct 17, 2026. Prices exclude shipping, core charges, and installation.

Volvo XC90 fender price snapshot

USD
Low
$60
Average
$352
High
$950
1,174 listings observed · 964 priced11d ago· How we price·

Report incorrect price

Reporting price for Volvo XC90 Fender

Reason

Regional supply

Where the Volvo XC90 fender is listed

We found priced Volvo XC90 fender listings at 165 salvage yards across 30 states. California supplies the most, with 172 listings (18% of the total) from 23 yards. Location matters: yards in Pennsylvania ask a median $125, while Georgia yards ask $610, 388% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California17223$243-3%
Texas14818$175-30%
Michigan9218$237-5%
Pennsylvania642$125-50%
Georgia478$610+144%
Indiana457$233-7%
Kentucky433$243-3%
Ohio428$228-9%

States with at least 10 priced listings. % is versus the $250 national median.

Replacement cost

What is the Volvo XC90 fender replacement cost?

ESTIMATE
Used part
$250
Volvo XC90 median asking price
Labor
$190–$600
2–4 hours at $95–$150/hr
Estimated total
$440–$850
median used part + labor

Labor is a typical independent-shop range for fender replacement, not a quote for your vehicle; it does not include paint if the panel isn't color-matched. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Volvo XC90 Fender

$

Current avg: $352 — we suggest $299 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

LH, charging port43 listingsInterchange 2016–2025$228$85 – $750
LH, w/o charging port38 listingsInterchange 2016–2025$250$80 – $780
RH34 listingsInterchange 2016–2025$250$80 – $950

Model-year comparison

What does a Volvo XC90 fender cost by year?

$210$275$341$407$4732016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Volvo XC90 fender cost?

Asking prices for a used Volvo XC90 fender are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, LH, charging port, lists at a $228 median, while RH commands $250, a 10% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2016 units carry the lowest median at $233, while 2024 tops the table at $450. Parts from 2016–2025 are interchangeable, so if the 2016 fits your vehicle, it offers the best value across 10 compatible years.

Against comparable vehicles, the Volvo XC90 sits 6% below the Jeep Wrangler ($266), 9% above the Subaru Crosstrek ($230), and 44% below the Mercedes GLE Class ($450) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used fender: what to check

  1. Confirm left vs right side. Listings frequently mislabel driver and passenger fenders.
  2. Check for pulled or elongated bolt holes, a sign of prior collision repair.
  3. Ask whether the inner liner and moldings are included.
  4. Same-color panels save paint costs; verify the paint code, not just the color.

Keep browsing this vehicle

What other Volvo XC90 parts are priced?

Price comparisons

Compare Volvo XC90 fender prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Volvo XC90 fender FAQ

How much is a used fender for a Volvo XC90?

The median asking price is $250 across 964 priced listings from 165 yards. 2025 is the cheapest model year we track, with a median of $233.

How much does it cost to replace a Volvo XC90 fender?

Using a used part, a Volvo XC90 fender replacement typically runs $440–$850 all-in: the median used fender for this model lists at $250, and independent-shop labor for fender replacement typically takes 2–4 hours at $95–$150/hr ($190–$600). The labor figure does not include paint if the panel isn't color-matched. Labor is a national part-level estimate, not a quote for your vehicle.

Which Volvo XC90 model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Volvo XC90 fender years are interchangeable?

Salvage-yard interchange data links Volvo XC90 fender fitments across 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 10 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Volvo XC90 Fender Cost — From $60 to $950