GMC Yukon steering wheel price snapshot
- Low
- $65
- Average
- $203
- High
- $580
Vehicle-specific price guide
How much is a used GMC Yukon steering wheel?
Asking prices from 269 salvage yards in 42 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 22, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the GMC Yukon steering wheel
What the steering wheel does, common failure signs, and prices across all vehicles: used steering wheel price guide →
Price summary
A used GMC Yukon steering wheel costs $65 to $580, with a median asking price of $175. Based on 1,981 priced salvage yard listings across the US, compatible across 2015–2025 (11 model years), updated Oct 22, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$178
Grade B (good)$175
Grade C (fair)$150
USD
Condition comparison
Price by part grade
Grade AClean / low wear$65–$5801,238 listings
Grade BStandard used$65–$418694 listings
Grade CVisible wear$100–$1759 listings
Grade XUngraded$75–$25040 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $65–$580 | 1,238 | |
| Grade BStandard used | $65–$418 | 694 | |
| Grade CVisible wear | $100–$175 | 9 | |
| Grade XUngraded | $75–$250 | 40 |
Median by grade
Grade price comparison
Grade A$178
Grade B$175
Grade C$150
Ungraded$115
Median asking price by seller-reported condition grade · $65–$580 overall range
Regional supply
Where the GMC Yukon steering wheel is listed
We found priced GMC Yukon steering wheel listings at 269 salvage yards across 42 states. Texas supplies the most, with 729 listings (31% of the total) from 25 yards. Location matters: yards in California ask a median $104, while Florida yards ask $285, 174% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| Texas | 729 | 25 | $170-3% |
| California | 188 | 14 | $104-41% |
| Oklahoma | 142 | 6 | $256+46% |
| Arkansas | 132 | 2 | $145-17% |
| Michigan | 126 | 24 | $189+8% |
| Florida | 91 | 14 | $285+63% |
| Missouri | 87 | 14 | $180+3% |
| Illinois | 74 | 9 | $209+19% |
States with at least 10 priced listings. % is versus the $175 national median.
Replacement cost
What is the GMC Yukon steering wheel replacement cost?
- Used part
- $175
- GMC Yukon median asking price
- Labor
- $50–$225
- 0.5–1.5 hours at $95–$150/hr
- Estimated total
- $225–$400
- median used part + labor
Labor is a typical independent-shop range for steering wheel replacement, not a quote for your vehicle. The part price is the live median from the salvage-yard listings on this page. How we price
Sources
- Labor time estimates: Part Price Guide labor database
Denali; GMC YUKON W/O HANDS FREE DRIVE; atmosphere Denali
1 listings$227$227 – $227Model-year comparison
What does a GMC Yukon steering wheel cost by year?
202554 listingsFits 2 years$250$85 – $580202422 listingsFits 3 years$215$95 – $387202395 listingsFits 3 years$245$75 – $527202272 listingsFits 2 years$266$75 – $387202186 listingsFits 2 years$221$85 – $4312020236 listingsFits 6 years$170$75 – $3652019206 listingsFits 6 years$155$75 – $3452018382 listingsFits 6 years$188$65 – $4922017356 listingsFits 6 years$189$65 – $3862016182 listingsFits 6 years$174$75 – $4602015356 listingsFits 6 years$150$75 – $368
Market analysis
How much does a used GMC Yukon steering wheel cost?
Asking prices for a used GMC Yukon steering wheel are unusually spread out: the top listing asks about 9 times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 19% premium over grade-C stock, with grade-A medians at $178.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, Denali; GMC YUKON W/O HANDS FREE DRIVE; atmosphere Denali, lists at a $227 median, while Search using only GMC Truck-Yukon (except XL) commands $325, a 43% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2015 units carry the lowest median at $150, while 2022 tops the table at $266. Parts from 2015–2020 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 6 compatible years.
Against comparable vehicles, the GMC Yukon sits 46% below the Mercedes C Class ($324), 71% below the Mercedes S Class ($610), and 65% below the Mercedes GLE Class ($500) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used steering wheel: what to check
- Inspect rim cover leather or vinyl for wear: Check top and side hand grips for sun damage, peeling leather finish, loose stitching, or sticky rubber.
- Verify switch button action and wiring: Press every integrated thumb switch to confirm spring return and check rear wire harness plugs for damage.
- Check center spline bore and puller thread holes: Inspect center mounting splines for rounding and verify threaded wheel-puller bolt holes are clean.
- Confirm rear clockspring drive peg tabs: Inspect the backside of the wheel hub for intact plastic pegs that drive the clockspring turn-signal cancel cam.
- Disconnect battery before steering wheel servicing: Wait ten minutes after disconnecting the battery before removing or installing wheels with active airbag circuits.
Keep browsing this vehicle
What other GMC Yukon parts are priced?
01wide ±198%
Wheels
$300median
$64$1,250
02wide ±165%
Side Mirror
$225median
$50$794
03wide ±262%
Transfer Case
$287median
$61$1,563
04wide ±78%
Transmission
$2,595median
$1,295$5,342
05wide ±231%
Strut
$265median
$50$1,272
06wide ±151%
Radiator
$227median
$68$754
07wide ±66%
Headlight Assembly
$750median
$282$1,268
08wide ±163%
Grille
$343median
$74$1,195
09wide ±106%
Alternator
$136median
$35$323
10wide ±108%
Starter
$126median
$35$306
11wide ±151%
Axle Shaft
$150median
$40$493
12wide ±123%
Tail Light
$309median
$59$822
Price comparisons
Compare GMC Yukon steering wheel prices
Steering Wheelcompare
MercedesSClassvsGMCYukon
Class$610
Yukon$175
$435 diff6,326 listings
Steering WheelcompareMercedesGLEClassvsGMCYukon
Class$500
Yukon$175
$325 diff6,254 listings
Steering WheelcompareChevySilverado1500vsGMCYukon
1500$171
Yukon$175
$4 diff5,901 listings
Steering WheelcompareBMW330ivsGMCYukon
330i$261
Yukon$175
$86 diff5,806 listings
Steering WheelcompareMercedesGLCClassvsGMCYukon
Class$429
Yukon$175
$254 diff5,736 listings
Steering WheelcompareFordF150vsGMCYukon
F150$174
Yukon$175
$1 diff5,130 listings
Compare fitments
What do similar vehicles charge for this part?
Acurawide ±116%
Acura ILX
$125median
$35$324
Acurawide ±123%
Acura Integra
$150median
$50$418
Acurawide ±117%
Acura MDX
$210median
$56$546
Acurawide ±185%
Acura RDX
$150median
$45$600
Acurawide ±116%
Acura TLX
$214median
$50$546
Audiwide ±180%
Audi A4
$204median
$65$799
Audiwide ±147%
Audi A6
$180median
$45$574
Audiwide ±101%
Audi Q3
$200median
$44$449
GMCwide ±98%
GMC Acadia
$164median
$41$361
GMCwide ±124%
GMC Canyon
$174median
$49$481
GMCwide ±180%
GMC Sierra 1500
$190median
$40$725
GMCwide ±114%
GMC Terrain
$145median
$39$371
Common questions
GMC Yukon steering wheel FAQ
How much is a used steering wheel for a GMC Yukon?
The median asking price is $175 across 1,981 priced listings from 269 yards. Grade-A units, the cleanest stock, have a median of $178. 2015 is the cheapest model year we track, with a median of $150.
How much does it cost to replace a GMC Yukon steering wheel?
Using a used part, a GMC Yukon steering wheel replacement typically runs $225–$400 all-in: the median used steering wheel for this model lists at $175, and independent-shop labor for steering wheel replacement typically takes 0.5–1.5 hours at $95–$150/hr ($50–$225). Labor is a national part-level estimate, not a quote for your vehicle.
Which GMC Yukon model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which GMC Yukon steering wheel years are interchangeable?
Salvage-yard interchange data links GMC Yukon steering wheel fitments across 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 11 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.