GMC Yukon axle shaft price snapshot
- Low
- $40
- Average
- $150
- High
- $493
Vehicle-specific price guide
How much is a used GMC Yukon axle shaft?
Asking prices from 265 salvage yards in 40 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedNov 1, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the GMC Yukon axle shaft
What the axle shaft does, common failure signs, and prices across all vehicles: used axle shaft price guide →
Also known asCV AxleCV ShaftDrive AxleHalf ShaftAxle AssemblyCovers front CV axles and rear axle shafts.
Price summary
A used GMC Yukon axle shaft costs $40 to $493, with a median asking price of $150. Based on 1,186 priced salvage yard listings across the US, compatible across 2014–2026 (13 model years), updated Nov 1, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$153
Grade B (good)$155
Grade C (fair)$100
USD
Condition comparison
Price by part grade
Grade AClean / low wear$40–$493723 listings
Grade BStandard used$51–$332370 listings
Grade CVisible wear$50–$10012 listings
Grade XUngraded$70–$25081 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $40–$493 | 723 | |
| Grade BStandard used | $51–$332 | 370 | |
| Grade CVisible wear | $50–$100 | 12 | |
| Grade XUngraded | $70–$250 | 81 |
Median by grade
Grade price comparison
Grade A$153
Grade B$155
Grade C$100
Ungraded$100
Median asking price by seller-reported condition grade · $40–$493 overall range
Regional supply
Where the GMC Yukon axle shaft is listed
We found priced GMC Yukon axle shaft listings at 265 salvage yards across 40 states. Illinois supplies the most, with 313 listings (14% of the total) from 14 yards. Location matters: yards in Arizona ask a median $88, while Florida yards ask $193, 119% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| Illinois | 313 | 14 | $155+3% |
| Texas | 203 | 25 | $153+2% |
| Arizona | 189 | 7 | $88-41% |
| Florida | 187 | 23 | $193+29% |
| Colorado | 145 | 7 | $112-25% |
| California | 129 | 27 | $120-20% |
| Kentucky | 120 | 5 | $156+4% |
| Oklahoma | 111 | 5 | $95-37% |
States with at least 10 priced listings. % is versus the $150 national median.
Replacement cost
What is the GMC Yukon axle shaft replacement cost?
- Used part
- $150
- GMC Yukon median asking price
- Labor
- $95–$375
- 1–2.5 hours at $95–$150/hr
- Estimated total
- $245–$525
- median used part + labor
Labor is a typical independent-shop range for axle shaft replacement, not a quote for your vehicle. The part price is the live median from the salvage-yard listings on this page. How we price
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a GMC Yukon axle shaft cost by year?
2025150 listingsFits 7 years$155$50 – $2692024150 listingsFits 8 years$166$50 – $4932023150 listingsFits 7 years$153$51 – $3002022150 listingsFits 7 years$185$40 – $3072021150 listingsFits 7 years$149$51 – $3322020100 listingsFits 7 years$88$50 – $3562019100 listingsFits 7 years$88$50 – $3572018100 listingsFits 7 years$157$100 – $360201747 listingsFits 7 years$131$100 – $4892016100 listingsFits 7 years$157$100 – $3602015100 listingsFits 7 years$88$50 – $356
Market analysis
How much does a used GMC Yukon axle shaft cost?
Asking prices for a used GMC Yukon axle shaft are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 53% premium over grade-C stock, with grade-A medians at $153.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, front axle, lists at a $155 median, while rear axle, LH commands $172, a 11% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2015 units carry the lowest median at $88, while 2022 tops the table at $185. Parts from 2014–2020 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 7 compatible years.
Against comparable vehicles, the GMC Yukon sits 48% below the Mercedes GLE Class ($287), 25% below the Mercedes C Class ($201), and 28% below the Mercedes E Class ($209) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used axle shaft: what to check
- Inspect CV boots for cracks. A torn boot means the joint has likely ingested grit.
- Confirm ABS ring compatibility with your sensor setup.
- Left and right shafts usually differ in length, so verify the side.
- Spin the joints through full articulation and listen for clicking.
Keep browsing this vehicle
What other GMC Yukon parts are priced?
01wide ±198%
Wheels
$300median
$64$1,250
02wide ±162%
Side Mirror
$229median
$50$794
03wide ±262%
Transfer Case
$287median
$61$1,563
04wide ±78%
Transmission
$2,595median
$1,295$5,342
05wide ±231%
Strut
$265median
$50$1,272
06wide ±151%
Radiator
$227median
$68$754
07wide ±66%
Headlight Assembly
$750median
$282$1,268
08wide ±163%
Grille
$343median
$74$1,195
09wide ±106%
Alternator
$136median
$35$323
10wide ±108%
Starter
$126median
$35$306
11wide ±121%
Tail Light
$314median
$59$822
12wide ±241%
AC Condenser
$170median
$40$860
Price comparisons
Compare GMC Yukon axle shaft prices
Axle Shaftcompare
MercedesGLEClassvsGMCYukon
Class$287
Yukon$150
$137 diff11,977 listings
Axle ShaftcompareJeepCherokeevsGMCYukon
Cherokee$96
Yukon$150
$54 diff9,339 listings
Axle ShaftcompareHyundaiSantaFevsGMCYukon
Fe$137
Yukon$150
$13 diff9,066 listings
Axle ShaftcompareJeepGrandCherokeevsGMCYukon
Cherokee$151
Yukon$150
$1 diff8,694 listings
Axle ShaftcompareMercedesSClassvsGMCYukon
Class$278
Yukon$150
$128 diff8,256 listings
Axle ShaftcompareKiaSorentovsGMCYukon
Sorento$126
Yukon$150
$24 diff7,838 listings
Compare fitments
What do similar vehicles charge for this part?
BMWwide ±278%
BMW X3
$200median
$34$1,144
BMWwide ±174%
BMW X5
$226median
$40$825
Chevywide ±168%
Chevy Equinox
$136median
$35$493
Chevywide ±193%
Chevy Malibu
$100median
$30$415
Chevywide ±132%
Chevy Silverado 1500
$160median
$45$468
Chevywide ±143%
Chevy Tahoe
$155median
$50$493
Chevywide ±154%
Chevy Traverse
$137median
$40$462
Dodgewide ±237%
Dodge Challenger
$190median
$35$937
Dodgewide ±252%
Dodge Charger
$155median
$30$812
Dodgewide ±230%
Dodge Durango
$126median
$30$609
Fordwide ±162%
Ford Edge
$120median
$35$423
GMCwide ±122%
GMC Sierra 1500
$165median
$55$456
Common questions
GMC Yukon axle shaft FAQ
How much is a used axle shaft for a GMC Yukon?
The median asking price is $150 across 1,186 priced listings from 265 yards. Grade-A units, the cleanest stock, have a median of $153. 2020 is the cheapest model year we track, with a median of $88.
How much does it cost to replace a GMC Yukon axle shaft?
Using a used part, a GMC Yukon axle shaft replacement typically runs $245–$525 all-in: the median used axle shaft for this model lists at $150, and independent-shop labor for axle shaft replacement typically takes 1–2.5 hours at $95–$150/hr ($95–$375). Labor is a national part-level estimate, not a quote for your vehicle.
Which GMC Yukon model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which GMC Yukon axle shaft years are interchangeable?
Salvage-yard interchange data links GMC Yukon axle shaft fitments across 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026. Searching all 13 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.