Hyundai Santa Fe wheels price snapshot
- Low
- $40
- Average
- $214
- High
- $800
Vehicle-specific price guide
How much is a used Hyundai Santa Fe wheels?
Asking prices from 801 salvage yards in 47 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 31, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Hyundai Santa Fe wheels
What the wheels does, common failure signs, and prices across all vehicles: used wheels price guide →
Also known asRimsCar RimsTruck RimsFactory WheelsOEM WheelsAlloy WheelsWheel Rim
Price summary
A used Hyundai Santa Fe wheels costs $40 to $800, with a median asking price of $191. Based on 3,998 priced salvage yard listings across the US, compatible across 2007–2026 (20 model years), updated Oct 31, 2026. Prices exclude shipping, core charges, and installation.
USD
Regional supply
Where the Hyundai Santa Fe wheels is listed
We found priced Hyundai Santa Fe wheels listings at 801 salvage yards across 47 states. Texas supplies the most, with 973 listings (13% of the total) from 61 yards. Location matters: yards in Florida ask a median $125, while Michigan yards ask $241, 93% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| Texas | 973 | 61 | $201+5% |
| Florida | 835 | 57 | $125-35% |
| Illinois | 396 | 33 | $215+13% |
| California | 318 | 39 | $200+5% |
| Michigan | 287 | 38 | $241+26% |
| Ohio | 273 | 33 | $185-3% |
| Indiana | 256 | 21 | $171-10% |
| Missouri | 240 | 23 | $207+8% |
States with at least 10 priced listings. % is versus the $191 national median.
Replacement cost
What is the Hyundai Santa Fe wheels replacement cost?
- Used part
- $191
- Hyundai Santa Fe median asking price
- Labor
- $25–$75
- 0.25–0.5 hours at $95–$150/hr
- Estimated total
- $215–$265
- median used part + labor
Labor is a typical independent-shop range for wheels replacement, not a quote for your vehicle; it does not include tire mounting and balancing per wheel. The part price is the live median from the salvage-yard listings on this page. How we price
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a Hyundai Santa Fe wheels cost by year?
2025358 listingsFits 6 years$328$75 – $8002024389 listingsFits 6 years$354$50 – $8002023400 listingsFits 6 years$247$50 – $7602022400 listingsFits 6 years$245$50 – $7602021230 listingsFits 6 years$244$75 – $7602020250 listingsFits 8 years$190$50 – $3902019476 listingsFits 14 years$125$50 – $4912018630 listingsFits 8 years$153$40 – $6062017561 listingsFits 5 years$144$50 – $5012016500 listingsFits 13 years$105$50 – $5352015444 listingsFits 10 years$95$40 – $480
Market analysis
How much does a used Hyundai Santa Fe wheels cost?
Asking prices for a used Hyundai Santa Fe wheels are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, d-eac-560-2622438-ho, lists at a $239 median, while d-e-560-2622444-ho commands $450, a 88% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2015 units carry the lowest median at $95, while 2024 tops the table at $354. Parts from 2011–2020 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 10 compatible years.
Against comparable vehicles, the Hyundai Santa Fe sits 11% below the Ram 1500 ($214), 28% below the Chevy Silverado 1500 ($266), and 27% below the GMC Sierra 1500 ($260) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used wheels: what to check
- Inspect rim lip and barrel for bends or cracks: Spin the wheel on a balancer to check inner and outer bead lips for subtle bends, curb gouges, or hair cracks.
- Verify bolt pattern, hub bore, and offset specs: Confirm bolt circle diameter, center hub bore, and wheel offset match your vehicle hub clearance.
- Check lug nut seat holes for elongation: Inspect lug taper holes for wallowed-out steel inserts or cracked aluminum caused by over-torqued lug nuts.
- Confirm tire pressure monitor sensor presence: Check whether original TPMS sensor valves remain installed or if rubber snap-in valves replaced them.
- Torque lug nuts in a star pattern to spec: Use a torque wrench to tighten lug nuts in a cross pattern to prevent warping brake rotors.
Keep browsing this vehicle
What other Hyundai Santa Fe parts are priced?
01wide ±190%
Axle Shaft
$135median
$30$544
02wide ±203%
Tail Light
$170median
$29$720
03wide ±260%
Side Mirror
$236median
$40$1,265
04wide ±265%
Transmission
$913median
$160$5,000
05wide ±227%
Headlight Assembly
$595median
$100$2,800
06wide ±180%
Strut
$162median
$35$617
07wide ±212%
Grille
$403median
$71$1,779
08wide ±127%
Fender
$268median
$68$750
09wide ±117%
Engine
$2,865median
$878$7,573
10wide ±194%
Radiator
$182median
$45$750
11wide ±229%
AC Compressor
$165median
$35$790
12wide ±188%
Transfer Case
$296median
$89$1,200
Price comparisons
Compare Hyundai Santa Fe wheels prices
Wheelscompare
ChevyTahoevsHyundaiSantaFe
Tahoe$275
Fe$191
$84 diff13,776 listings
WheelscompareRam3500vsHyundaiSantaFe
3500$250
Fe$191
$59 diff13,137 listings
WheelscompareJeepGrandCherokeevsHyundaiSantaFe
Cherokee$225
Fe$191
$34 diff12,392 listings
WheelscompareChevySuburbanvsHyundaiSantaFe
Suburban$300
Fe$191
$109 diff12,327 listings
WheelscompareMercedesSClassvsHyundaiSantaFe
Class$475
Fe$191
$284 diff12,052 listings
WheelscompareMercedesGLCClassvsHyundaiSantaFe
Class$350
Fe$191
$159 diff11,959 listings
Compare fitments
What do similar vehicles charge for this part?
BMWwide ±223%
BMW X3
$250median
$49$1,162
BMWwide ±213%
BMW X5
$376median
$65$1,666
Chevywide ±229%
Chevy Equinox
$178median
$35$850
Chevywide ±254%
Chevy Malibu
$150median
$25$788
Chevywide ±215%
Chevy Silverado 1500
$266median
$54$1,200
Chevywide ±233%
Chevy Tahoe
$275median
$55$1,336
Chevywide ±139%
Chevy Traverse
$200median
$39$595
Dodgewide ±230%
Dodge Challenger
$279median
$51$1,335
Dodgewide ±275%
Dodge Charger
$220median
$39$1,250
Hyundaiwide ±240%
Hyundai Elantra
$150median
$30$750
Hyundaiwide ±231%
Hyundai Sonata
$150median
$30$723
Hyundaiwide ±190%
Hyundai Tucson
$200median
$42$803
Common questions
Hyundai Santa Fe wheels FAQ
How much is a used wheels for a Hyundai Santa Fe?
The median asking price is $191 across 3,998 priced listings from 801 yards. 2015 is the cheapest model year we track, with a median of $95.
How much does it cost to replace a Hyundai Santa Fe wheels?
Using a used part, a Hyundai Santa Fe wheels replacement typically runs $215–$265 all-in: the median used wheels for this model lists at $191, and independent-shop labor for wheels replacement typically takes 0.25–0.5 hours at $95–$150/hr ($25–$75). The labor figure does not include tire mounting and balancing per wheel. Labor is a national part-level estimate, not a quote for your vehicle.
Which Hyundai Santa Fe model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Hyundai Santa Fe wheels years are interchangeable?
Salvage-yard interchange data links Hyundai Santa Fe wheels fitments across 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026. Searching all 20 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.