Used Infiniti Q60 ABS module from a salvage yard

Vehicle-specific price guide

How much is a used Infiniti Q60 ABS module?

Asking prices from 386 salvage yards in 43 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 15, 2026
Strong coverage1,211 priced of 1,453 observed4 variantsMethodology v2.1 →

Part overview

About the Infiniti Q60 ABS module

What the ABS module does, common failure signs, and prices across all vehicles: used ABS module price guide →

Also known asABS PumpABS Control ModuleEBCMABS Unit
Price summary

A used Infiniti Q60 ABS module costs $50 to $675, with a median asking price of $208. Based on 1,211 priced salvage yard listings across the US, compatible across 2011–2022 (11 model years), updated Oct 15, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$210
Grade B (good)$206

Infiniti Q60 ABS module price snapshot

USD
Low
$50
Average
$225
High
$675
1,453 listings observed · 1,211 priced14d ago· How we price·

Report incorrect price

Reporting price for Infiniti Q60 ABS Module

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$50–$6751,069 listings
Grade BStandard used$80–$42884 listings
Grade XUngraded$50–$64058 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $50–$675 overall range

Regional supply

Where the Infiniti Q60 ABS module is listed

We found priced Infiniti Q60 ABS module listings at 386 salvage yards across 43 states. Texas supplies the most, with 130 listings (11% of the total) from 32 yards. Location matters: yards in California ask a median $150, while New Jersey yards ask $265, 77% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Texas13032$241+16%
North Carolina12025$193-7%
Florida10228$207
New Jersey6916$265+27%
California6627$150-28%
Michigan6126$242+16%
Pennsylvania5614$214+3%
Georgia5214$196-6%

States with at least 10 priced listings. % is versus the $208 national median.

Replacement cost

What is the Infiniti Q60 ABS module replacement cost?

ESTIMATE
Used part
$208
Infiniti Q60 median asking price
Labor
$95–$450
1–3 hours at $95–$150/hr
Estimated total
$305–$660
median used part + labor

Labor is a typical independent-shop range for ABS module replacement, not a quote for your vehicle; it does not include brake fluid flush and module programming if required. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Infiniti Q60 ABS Module

$

Current avg: $225 — we suggest $191 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2022)

(assembly), RWD, ID 47660-5CE3A18 listingsInterchange 2021–2022$265$125 – $341
(assembly), AWD, ID 47660-5CF3A11 listingsInterchange 2021–2022$351$135 – $672
(assembly), RWD, ID 47660-5CE8A9 listings$435$114 – $613
(assembly), AWD, ID 47660-5CF8A5 listings$386$250 – $428

Model-year comparison

What does a Infiniti Q60 ABS module cost by year?

$132$178$224$270$3162015201720182019202020212022
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Infiniti Q60 ABS module cost?

Asking prices for a used Infiniti Q60 ABS module are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 2% premium over grade-B stock, with grade-A medians at $210.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, (assembly), RWD, ID 47660-5CE3A, lists at a $265 median, while (assembly), RWD, ID 47660-5CE8A commands $435, a 64% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2015 units carry the lowest median at $147, while 2022 tops the table at $301. Parts from 2011–2015 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 5 compatible years.

Against comparable vehicles, the Infiniti Q60 sits 39% above the Honda Civic ($150), 16% above the Honda CRV ($180), and 42% above the Nissan Rogue ($146) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used ABS module: what to check

  1. Verify option code compatibility: Exact matching of vehicle traction control, stability control, and wheel-speed sensor options is required because mismatched modules cannot be recoded.
  2. Inspect connector pins for liquid intrusion: Check for green copper oxidation, melted pin housings, or burnt traces inside the harness plug caused by leaking brake fluid.
  3. Confirm hydraulic block port sealing: Ensure all hydraulic line ports remained capped during storage to prevent internal solenoid valve corrosion and dirt contamination.
  4. Purchase pump and ECU together: Buying the combined hydraulic block and electronic control unit prevents internal seal damage caused by bench separation.
  5. Plan for bi-directional scan tool bleeding: Budget time for an automated scan tool system bleed and steering angle sensor calibration immediately after installation.

Keep browsing this vehicle

What other Infiniti Q60 parts are priced?

Price comparisons

Compare Infiniti Q60 ABS module prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Infiniti Q60 ABS module FAQ

How much is a used ABS module for a Infiniti Q60?

The median asking price is $208 across 1,211 priced listings from 386 yards. Grade-A units, the cleanest stock, have a median of $210. 2015 is the cheapest model year we track, with a median of $147.

How much does it cost to replace a Infiniti Q60 ABS module?

Using a used part, a Infiniti Q60 ABS module replacement typically runs $305–$660 all-in: the median used ABS module for this model lists at $208, and independent-shop labor for ABS module replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). The labor figure does not include brake fluid flush and module programming if required. Labor is a national part-level estimate, not a quote for your vehicle.

Which Infiniti Q60 model years does this price guide cover?

This guide currently has year-level pricing for 2022, 2021, 2020, 2019, 2018, 2017, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Infiniti Q60 ABS module years are interchangeable?

Salvage-yard interchange data links Infiniti Q60 ABS module fitments across 2011, 2012, 2013, 2014, 2015, 2017, 2018, 2019, 2020, 2021, 2022. Searching all 11 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Infiniti Q60 ABS Module Cost — From $50 to $675