Used Infiniti Q60 steering column from a salvage yard

Vehicle-specific price guide

How much is a used Infiniti Q60 steering column?

Asking prices from 392 salvage yards in 41 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 14, 2026
Strong coverage2,276 priced of 2,601 observed7 variantsMethodology v2.1 →

Part overview

About the Infiniti Q60 steering column

What the steering column does, common failure signs, and prices across all vehicles: used steering column price guide →

Price summary

A used Infiniti Q60 steering column costs $61 to $550, with a median asking price of $175. Based on 2,276 priced salvage yard listings across the US, compatible across 2015–2023 (8 model years), updated Oct 14, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$175
Grade B (good)$161
Grade C (fair)$150

Infiniti Q60 steering column price snapshot

USD
Low
$61
Average
$185
High
$550
2,601 listings observed · 2,276 priced15d ago· How we price·

Report incorrect price

Reporting price for Infiniti Q60 Steering Column

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$61–$5501,921 listings
Grade BStandard used$66–$420309 listings
Grade CVisible wear$150–$1504 listings
Grade XUngraded$75–$44542 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $61–$550 overall range

Regional supply

Where the Infiniti Q60 steering column is listed

We found priced Infiniti Q60 steering column listings at 392 salvage yards across 41 states. Florida supplies the most, with 327 listings (14% of the total) from 25 yards. Location matters: yards in California ask a median $130, while Michigan yards ask $229, 76% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Florida32725$200+14%
Texas22431$161-8%
Michigan17432$229+31%
California13519$130-26%
North Carolina12420$140-20%
Ohio10018$175
New York9720$195+11%
Illinois8920$142-19%

States with at least 10 priced listings. % is versus the $175 national median.

Replacement cost

What is the Infiniti Q60 steering column replacement cost?

ESTIMATE
Used part
$175
Infiniti Q60 median asking price
Labor
$190–$750
2–5 hours at $95–$150/hr
Estimated total
$365–$925
median used part + labor

Labor is a typical independent-shop range for steering column replacement, not a quote for your vehicle; it does not include steering wheel and dashboard panel removal and reassembly. The part price is the live median from the salvage-yard listings on this page. Full steering column replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Infiniti Q60 Steering Column

$

Current avg: $185 — we suggest $157 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2022)

(floor shift), direct adaptive steering, AWD44 listingsInterchange 2017–2022$150$85 – $275
(floor shift), w/o direct adaptive steering; Pure42 listingsInterchange 2017–2020$171$75 – $355
(floor shift), direct adaptive steering, RWD36 listingsInterchange 2018–2023$192$100 – $300
(floor shift), w/o direct adaptive steering; Red Sport 4006 listingsInterchange 2018–2022$171$146 – $445

Model-year comparison

What does a Infiniti Q60 steering column cost by year?

$135$150$165$179$1942015201720182019202020212022
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Infiniti Q60 steering column cost?

Asking prices for a used Infiniti Q60 steering column are unusually spread out: the top listing asks about 9 times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 17% premium over grade-C stock, with grade-A medians at $175.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, (floor shift), direct adaptive steering, AWD, lists at a $150 median, while (floor shift), w/o direct adaptive steering; Luxe, power tilt and telescopic, AWD, (rain sensor) commands $200, a 33% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2015 units carry the lowest median at $150, while 2019 tops the table at $185. Year-level pages linked in the table above break each one down by grade and variant.

Against comparable vehicles, the Infiniti Q60 sits 21% above the Subaru Impreza ($145), 40% above the Subaru Outback ($125), and 21% above the Honda Civic ($145) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used steering column: what to check

  1. Inspect intermediate shaft u-joint splines: Check lower universal joints for play, binding, or stripped pinch-bolt splines where the column meets the rack.
  2. Verify electric power steering motor inclusion: Ask if columns with integrated electric assist include the assist motor, reduction gear, and module assembly.
  3. Check tilt and telescoping locking lever: Test manual tilt and telescoping levers to ensure column lock shoes clamp tightly without slipping under load.
  4. Confirm ignition switch and clockspring wiring: Match multi-function switch stalk plugs, clockspring connectors, and key tumbler housings to your vehicle.
  5. Lock steering wheel straight before installation: Lock steering wheel alignment straight before installation to prevent over-rotating and snapping internal clockspring wires.

Keep browsing this vehicle

What other Infiniti Q60 parts are priced?

Price comparisons

Compare Infiniti Q60 steering column prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Infiniti Q60 steering column FAQ

How much is a used steering column for a Infiniti Q60?

The median asking price is $175 across 2,276 priced listings from 392 yards. Grade-A units, the cleanest stock, have a median of $175. 2021 is the cheapest model year we track, with a median of $150.

How much does it cost to replace a Infiniti Q60 steering column?

Using a used part, a Infiniti Q60 steering column replacement typically runs $365–$925 all-in: the median used steering column for this model lists at $175, and independent-shop labor for steering column replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include steering wheel and dashboard panel removal and reassembly. Labor is a national part-level estimate, not a quote for your vehicle.

Which Infiniti Q60 model years does this price guide cover?

This guide currently has year-level pricing for 2022, 2021, 2020, 2019, 2018, 2017, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Infiniti Q60 steering column years are interchangeable?

Salvage-yard interchange data links Infiniti Q60 steering column fitments across 2015, 2017, 2018, 2019, 2020, 2021, 2022, 2023. Searching all 8 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Infiniti Q60 Steering Column Cost — From $61 to $550