Used Jeep Grand Cherokee ABS module from a salvage yard

Vehicle-specific price guide

How much is a used Jeep Grand Cherokee ABS module?

Asking prices from 290 salvage yards in 40 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 13, 2026
Strong coverage1,207 priced of 1,327 observed2 variantsMethodology v2.1 →

Part overview

About the Jeep Grand Cherokee ABS module

What the ABS module does, common failure signs, and prices across all vehicles: used ABS module price guide →

Also known asABS PumpABS Control ModuleEBCMABS Unit
Price summary

A used Jeep Grand Cherokee ABS module costs $45 to $500, with a median asking price of $176. Based on 1,207 priced salvage yard listings across the US, compatible across 2015–2025 (11 model years), updated Sep 13, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$175
Grade B (good)$184
Grade C (fair)$78

Jeep Grand Cherokee ABS module price snapshot

USD
Low
$45
Average
$182
High
$500
1,327 listings observed · 1,207 priced1mo ago· How we price·

Report incorrect price

Reporting price for Jeep Grand Cherokee ABS Module

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$45–$500813 listings
Grade BStandard used$66–$345322 listings
Grade CVisible wear$78–$782 listings
Grade XUngraded$70–$45070 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $45–$500 overall range

Regional supply

Where the Jeep Grand Cherokee ABS module is listed

We found priced Jeep Grand Cherokee ABS module listings at 290 salvage yards across 40 states. Texas supplies the most, with 190 listings (16% of the total) from 35 yards. Location matters: yards in Florida ask a median $129, while Illinois yards ask $254, 97% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Texas19035$184+5%
California14038$173-2%
Florida11821$129-27%
Georgia9016$149-15%
Arizona8513$132-25%
Illinois7013$254+44%
Indiana688$193+10%
North Carolina6316$202+15%

States with at least 10 priced listings. % is versus the $176 national median.

Replacement cost

What is the Jeep Grand Cherokee ABS module replacement cost?

ESTIMATE
Used part
$176
Jeep Grand Cherokee median asking price
Labor
$95–$450
1–3 hours at $95–$150/hr
Estimated total
$270–$625
median used part + labor

Labor is a typical independent-shop range for ABS module replacement, not a quote for your vehicle; it does not include brake fluid flush and module programming if required. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Jeep Grand Cherokee ABS Module

$

Current avg: $182 — we suggest $155 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

3.6L38 listings$175$150 – $500

2.0L

2 listings
$171$171 – $171

Model-year comparison

What does a Jeep Grand Cherokee ABS module cost by year?

$99$130$160$191$22220152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Jeep Grand Cherokee ABS module cost?

Asking prices for a used Jeep Grand Cherokee ABS module are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 124% premium over grade-C stock, with grade-A medians at $175.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 2.0L, lists at a $171 median, while 3.6L commands $175, a 2% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2015 units carry the lowest median at $110, while 2024 tops the table at $211. Year-level pages linked in the table above break each one down by grade and variant.

Against comparable vehicles, the Jeep Grand Cherokee sits 17% above the Honda Civic ($150), 2% below the Honda CRV ($180), and 21% above the Nissan Rogue ($146) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used ABS module: what to check

  1. Verify option code compatibility: Exact matching of vehicle traction control, stability control, and wheel-speed sensor options is required because mismatched modules cannot be recoded.
  2. Inspect connector pins for liquid intrusion: Check for green copper oxidation, melted pin housings, or burnt traces inside the harness plug caused by leaking brake fluid.
  3. Confirm hydraulic block port sealing: Ensure all hydraulic line ports remained capped during storage to prevent internal solenoid valve corrosion and dirt contamination.
  4. Purchase pump and ECU together: Buying the combined hydraulic block and electronic control unit prevents internal seal damage caused by bench separation.
  5. Plan for bi-directional scan tool bleeding: Budget time for an automated scan tool system bleed and steering angle sensor calibration immediately after installation.

Keep browsing this vehicle

What other Jeep Grand Cherokee parts are priced?

Price comparisons

Compare Jeep Grand Cherokee ABS module prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Jeep Grand Cherokee ABS module FAQ

How much is a used ABS module for a Jeep Grand Cherokee?

The median asking price is $176 across 1,207 priced listings from 290 yards. Grade-A units, the cleanest stock, have a median of $175. 2015 is the cheapest model year we track, with a median of $110.

How much does it cost to replace a Jeep Grand Cherokee ABS module?

Using a used part, a Jeep Grand Cherokee ABS module replacement typically runs $270–$625 all-in: the median used ABS module for this model lists at $176, and independent-shop labor for ABS module replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). The labor figure does not include brake fluid flush and module programming if required. Labor is a national part-level estimate, not a quote for your vehicle.

Which Jeep Grand Cherokee model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Jeep Grand Cherokee ABS module years are interchangeable?

Salvage-yard interchange data links Jeep Grand Cherokee ABS module fitments across 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 11 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Jeep Grand Cherokee ABS Module Cost — From $45 to $500