Used Jeep Wrangler ABS module from a salvage yard

Vehicle-specific price guide

How much is a used Jeep Wrangler ABS module?

Asking prices from 404 salvage yards in 47 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 22, 2026
Strong coverage1,302 priced of 1,521 observed3 variantsMethodology v2.1 →

Part overview

About the Jeep Wrangler ABS module

What the ABS module does, common failure signs, and prices across all vehicles: used ABS module price guide →

Also known asABS PumpABS Control ModuleEBCMABS Unit
Price summary

A used Jeep Wrangler ABS module costs $63 to $850, with a median asking price of $209. Based on 1,302 priced salvage yard listings across the US, compatible across 2015–2025 (11 model years), updated Oct 22, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$211
Grade B (good)$178

Jeep Wrangler ABS module price snapshot

USD
Low
$63
Average
$240
High
$850
1,521 listings observed · 1,302 priced9d ago· How we price·

Report incorrect price

Reporting price for Jeep Wrangler ABS Module

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$63–$8501,039 listings
Grade BStandard used$68–$616203 listings
Grade XUngraded$75–$85060 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $63–$850 overall range

Regional supply

Where the Jeep Wrangler ABS module is listed

We found priced Jeep Wrangler ABS module listings at 404 salvage yards across 47 states. Illinois supplies the most, with 322 listings (13% of the total) from 18 yards. Location matters: yards in Texas ask a median $131, while Georgia yards ask $267, 104% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Illinois32218$170-19%
California20934$225+8%
Texas16226$131-37%
Ohio14417$187-11%
Michigan14131$250+20%
Missouri1108$194-7%
Indiana10515$193-8%
Georgia10012$267+28%

States with at least 10 priced listings. % is versus the $209 national median.

Replacement cost

What is the Jeep Wrangler ABS module replacement cost?

ESTIMATE
Used part
$209
Jeep Wrangler median asking price
Labor
$95–$450
1–3 hours at $95–$150/hr
Estimated total
$305–$660
median used part + labor

Labor is a typical independent-shop range for ABS module replacement, not a quote for your vehicle; it does not include brake fluid flush and module programming if required. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Jeep Wrangler ABS Module

$

Current avg: $240 — we suggest $204 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

gasoline, w/o adaptive cruise49 listings$106$101 – $447
gasoline, adaptive cruise23 listings$200$146 – $375
plug-in hybrid3 listings$175$171 – $175

Model-year comparison

What does a Jeep Wrangler ABS module cost by year?

$131$322$512$702$89320152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Jeep Wrangler ABS module cost?

Asking prices for a used Jeep Wrangler ABS module are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 19% premium over grade-B stock, with grade-A medians at $211.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, gasoline, w/o adaptive cruise, lists at a $106 median, while gasoline, adaptive cruise commands $200, a 89% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2025 units carry the lowest median at $146, while 2015 tops the table at $850. Year-level pages linked in the table above break each one down by grade and variant.

Against comparable vehicles, the Jeep Wrangler sits 39% above the Honda Civic ($150), 16% above the Honda CRV ($180), and 43% above the Nissan Rogue ($146) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used ABS module: what to check

  1. Verify option code compatibility: Exact matching of vehicle traction control, stability control, and wheel-speed sensor options is required because mismatched modules cannot be recoded.
  2. Inspect connector pins for liquid intrusion: Check for green copper oxidation, melted pin housings, or burnt traces inside the harness plug caused by leaking brake fluid.
  3. Confirm hydraulic block port sealing: Ensure all hydraulic line ports remained capped during storage to prevent internal solenoid valve corrosion and dirt contamination.
  4. Purchase pump and ECU together: Buying the combined hydraulic block and electronic control unit prevents internal seal damage caused by bench separation.
  5. Plan for bi-directional scan tool bleeding: Budget time for an automated scan tool system bleed and steering angle sensor calibration immediately after installation.

Keep browsing this vehicle

What other Jeep Wrangler parts are priced?

Price comparisons

Compare Jeep Wrangler ABS module prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Jeep Wrangler ABS module FAQ

How much is a used ABS module for a Jeep Wrangler?

The median asking price is $209 across 1,302 priced listings from 404 yards. Grade-A units, the cleanest stock, have a median of $211. 2025 is the cheapest model year we track, with a median of $146.

How much does it cost to replace a Jeep Wrangler ABS module?

Using a used part, a Jeep Wrangler ABS module replacement typically runs $305–$660 all-in: the median used ABS module for this model lists at $209, and independent-shop labor for ABS module replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). The labor figure does not include brake fluid flush and module programming if required. Labor is a national part-level estimate, not a quote for your vehicle.

Which Jeep Wrangler model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Jeep Wrangler ABS module years are interchangeable?

Salvage-yard interchange data links Jeep Wrangler ABS module fitments across 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 11 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Jeep Wrangler ABS Module Cost — From $63 to $850