Used Mercedes GLE Class ABS module from a salvage yard

Vehicle-specific price guide

How much is a used Mercedes GLE Class ABS module?

Asking prices from 285 salvage yards in 42 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 20, 2026
Strong coverage3,868 priced of 4,224 observed6 variantsMethodology v2.1 →

Part overview

About the Mercedes GLE Class ABS module

What the ABS module does, common failure signs, and prices across all vehicles: used ABS module price guide →

Also known asABS PumpABS Control ModuleEBCMABS Unit
Price summary

A used Mercedes GLE Class ABS module costs $75 to $1,350, with a median asking price of $320. Based on 3,868 priced salvage yard listings across the US, compatible across 2016–2025 (10 model years), updated Oct 20, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$319
Grade B (good)$348

Mercedes GLE Class ABS module price snapshot

USD
Low
$75
Average
$337
High
$1,350
4,224 listings observed · 3,868 priced8d ago· How we price·

Report incorrect price

Reporting price for Mercedes GLE Class ABS Module

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$75–$1,3503,245 listings
Grade BStandard used$100–$588547 listings
Grade XUngraded$116–$44576 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $75–$1,350 overall range

Regional supply

Where the Mercedes GLE Class ABS module is listed

We found priced Mercedes GLE Class ABS module listings at 285 salvage yards across 42 states. Florida supplies the most, with 973 listings (22% of the total) from 21 yards. Location matters: yards in California ask a median $170, while North Carolina yards ask $429, 152% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Florida97321$343+7%
California40326$170-47%
South Carolina4006$369+15%
Michigan31818$250-22%
Texas28926$231-28%
North Carolina2599$429+34%
Georgia2546$401+25%
New Jersey17013$339+6%

States with at least 10 priced listings. % is versus the $320 national median.

Replacement cost

What is the Mercedes GLE Class ABS module replacement cost?

ESTIMATE
Used part
$320
Mercedes GLE Class median asking price
Labor
$95–$450
1–3 hours at $95–$150/hr
Estimated total
$415–$770
median used part + labor

Labor is a typical independent-shop range for ABS module replacement, not a quote for your vehicle; it does not include brake fluid flush and module programming if required. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Mercedes GLE Class ABS Module

$

Current avg: $337 — we suggest $286 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

167 Type, GLE35027 listingsInterchange 2023–2025$370$250 – $471
167 Type, GLE45027 listingsInterchange 2023–2025$370$250 – $471
167 Type, GLE450e27 listingsInterchange 2023–2025$370$250 – $471
167 Type, GLE58027 listingsInterchange 2023–2025$370$250 – $471
167 Type, GLE538 listings$1,058$799 – $1,133
167 Type, GLE63s8 listings$1,058$799 – $1,133

Model-year comparison

What does a Mercedes GLE Class ABS module cost by year?

$184$243$302$361$4202016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Mercedes GLE Class ABS module cost?

Asking prices for a used Mercedes GLE Class ABS module are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 167 Type, GLE350, lists at a $370 median, while 167 Type, GLE63s commands $1,058, a 186% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2017 units carry the lowest median at $204, while 2024 tops the table at $400. Parts from 2016–2019 are interchangeable, so if the 2017 fits your vehicle, it offers the best value across 4 compatible years.

Against comparable vehicles, the Mercedes GLE Class sits 113% above the Honda Civic ($150), 78% above the Honda CRV ($180), and 119% above the Nissan Rogue ($146) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used ABS module: what to check

  1. Verify option code compatibility: Exact matching of vehicle traction control, stability control, and wheel-speed sensor options is required because mismatched modules cannot be recoded.
  2. Inspect connector pins for liquid intrusion: Check for green copper oxidation, melted pin housings, or burnt traces inside the harness plug caused by leaking brake fluid.
  3. Confirm hydraulic block port sealing: Ensure all hydraulic line ports remained capped during storage to prevent internal solenoid valve corrosion and dirt contamination.
  4. Purchase pump and ECU together: Buying the combined hydraulic block and electronic control unit prevents internal seal damage caused by bench separation.
  5. Plan for bi-directional scan tool bleeding: Budget time for an automated scan tool system bleed and steering angle sensor calibration immediately after installation.

Keep browsing this vehicle

What other Mercedes GLE Class parts are priced?

Price comparisons

Compare Mercedes GLE Class ABS module prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Mercedes GLE Class ABS module FAQ

How much is a used ABS module for a Mercedes GLE Class?

The median asking price is $320 across 3,868 priced listings from 285 yards. Grade-A units, the cleanest stock, have a median of $319. 2017 is the cheapest model year we track, with a median of $204.

How much does it cost to replace a Mercedes GLE Class ABS module?

Using a used part, a Mercedes GLE Class ABS module replacement typically runs $415–$770 all-in: the median used ABS module for this model lists at $320, and independent-shop labor for ABS module replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). The labor figure does not include brake fluid flush and module programming if required. Labor is a national part-level estimate, not a quote for your vehicle.

Which Mercedes GLE Class model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Mercedes GLE Class ABS module years are interchangeable?

Salvage-yard interchange data links Mercedes GLE Class ABS module fitments across 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 10 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Mercedes GLE Class ABS Module Cost — From $75 to $1,350