Used Nissan Altima ABS module from a salvage yard

Vehicle-specific price guide

How much is a used Nissan Altima ABS module?

Asking prices from 391 salvage yards in 42 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 21, 2026
Strong coverage848 priced of 1,121 observed2 variantsMethodology v2.1 →

Part overview

About the Nissan Altima ABS module

What the ABS module does, common failure signs, and prices across all vehicles: used ABS module price guide →

Also known asABS PumpABS Control ModuleEBCMABS Unit
Price summary

A used Nissan Altima ABS module costs $25 to $401, with a median asking price of $128. Based on 848 priced salvage yard listings across the US, compatible across 2013–2025 (13 model years), updated Oct 21, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$145
Grade B (good)$182
Grade C (fair)$90

Nissan Altima ABS module price snapshot

USD
Low
$25
Average
$155
High
$401
1,121 listings observed · 848 priced10d ago· How we price·

Report incorrect price

Reporting price for Nissan Altima ABS Module

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$40–$401516 listings
Grade BStandard used$40–$401223 listings
Grade CVisible wear$65–$1507 listings
Grade XUngraded$25–$200102 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $25–$401 overall range

Regional supply

Where the Nissan Altima ABS module is listed

We found priced Nissan Altima ABS module listings at 391 salvage yards across 42 states. Texas supplies the most, with 342 listings (26% of the total) from 59 yards. Location matters: yards in New York ask a median $99, while Michigan yards ask $252, 155% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Texas34259$177+38%
California24359$100-22%
Florida15725$125-2%
Illinois8122$150+17%
Arizona4714$148+16%
New York399$99-23%
Michigan3722$252+97%
Missouri378$222+73%

States with at least 10 priced listings. % is versus the $128 national median.

Replacement cost

What is the Nissan Altima ABS module replacement cost?

ESTIMATE
Used part
$128
Nissan Altima median asking price
Labor
$95–$450
1–3 hours at $95–$150/hr
Estimated total
$225–$580
median used part + labor

Labor is a typical independent-shop range for ABS module replacement, not a quote for your vehicle; it does not include brake fluid flush and module programming if required. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Nissan Altima ABS Module

$

Current avg: $155 — we suggest $132 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

cruise control50 listings$222$130 – $395
adaptive cruise46 listings$324$150 – $401

Model-year comparison

What does a Nissan Altima ABS module cost by year?

$72$116$159$203$24720152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Nissan Altima ABS module cost?

Asking prices for a used Nissan Altima ABS module are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 61% premium over grade-C stock, with grade-A medians at $145.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, cruise control, lists at a $222 median, while adaptive cruise commands $324, a 46% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2015 units carry the lowest median at $80, while 2025 tops the table at $235. Parts from 2013–2015 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 3 compatible years.

Against comparable vehicles, the Nissan Altima sits 15% below the Honda Civic ($150), 29% below the Honda CRV ($180), and 12% below the Nissan Rogue ($146) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used ABS module: what to check

  1. Verify option code compatibility: Exact matching of vehicle traction control, stability control, and wheel-speed sensor options is required because mismatched modules cannot be recoded.
  2. Inspect connector pins for liquid intrusion: Check for green copper oxidation, melted pin housings, or burnt traces inside the harness plug caused by leaking brake fluid.
  3. Confirm hydraulic block port sealing: Ensure all hydraulic line ports remained capped during storage to prevent internal solenoid valve corrosion and dirt contamination.
  4. Purchase pump and ECU together: Buying the combined hydraulic block and electronic control unit prevents internal seal damage caused by bench separation.
  5. Plan for bi-directional scan tool bleeding: Budget time for an automated scan tool system bleed and steering angle sensor calibration immediately after installation.

Keep browsing this vehicle

What other Nissan Altima parts are priced?

Price comparisons

Compare Nissan Altima ABS module prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Nissan Altima ABS module FAQ

How much is a used ABS module for a Nissan Altima?

The median asking price is $128 across 848 priced listings from 391 yards. Grade-A units, the cleanest stock, have a median of $145. 2015 is the cheapest model year we track, with a median of $80.

How much does it cost to replace a Nissan Altima ABS module?

Using a used part, a Nissan Altima ABS module replacement typically runs $225–$580 all-in: the median used ABS module for this model lists at $128, and independent-shop labor for ABS module replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). The labor figure does not include brake fluid flush and module programming if required. Labor is a national part-level estimate, not a quote for your vehicle.

Which Nissan Altima model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Nissan Altima ABS module years are interchangeable?

Salvage-yard interchange data links Nissan Altima ABS module fitments across 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 13 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Nissan Altima ABS Module Cost — From $25 to $401