Used Nissan Murano ABS module from a salvage yard

Vehicle-specific price guide

How much is a used Nissan Murano ABS module?

Asking prices from 436 salvage yards in 41 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 23, 2026
Strong coverage1,836 priced of 2,042 observed2 variantsMethodology v2.1 →

Part overview

About the Nissan Murano ABS module

What the ABS module does, common failure signs, and prices across all vehicles: used ABS module price guide →

Also known asABS PumpABS Control ModuleEBCMABS Unit
Price summary

A used Nissan Murano ABS module costs $35 to $607, with a median asking price of $150. Based on 1,836 priced salvage yard listings across the US, compatible across 2015–2025 (11 model years), updated Sep 23, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$150
Grade B (good)$150
Grade C (fair)$87

Nissan Murano ABS module price snapshot

USD
Low
$35
Average
$169
High
$607
2,042 listings observed · 1,836 priced1mo ago· How we price·

Report incorrect price

Reporting price for Nissan Murano ABS Module

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$35–$6071,242 listings
Grade BStandard used$40–$526500 listings
Grade CVisible wear$70–$5265 listings
Grade XUngraded$40–$50089 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $35–$607 overall range

Regional supply

Where the Nissan Murano ABS module is listed

We found priced Nissan Murano ABS module listings at 436 salvage yards across 41 states. Texas supplies the most, with 496 listings (27% of the total) from 53 yards. Location matters: yards in Indiana ask a median $120, while Missouri yards ask $178, 48% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Texas49653$146-3%
California19042$136-9%
Illinois10026$162+8%
Missouri8815$178+19%
Colorado7611$151+1%
Indiana7216$120-20%
Arizona6714$150
Oklahoma638$172+15%

States with at least 10 priced listings. % is versus the $150 national median.

Replacement cost

What is the Nissan Murano ABS module replacement cost?

ESTIMATE
Used part
$150
Nissan Murano median asking price
Labor
$95–$450
1–3 hours at $95–$150/hr
Estimated total
$245–$600
median used part + labor

Labor is a typical independent-shop range for ABS module replacement, not a quote for your vehicle; it does not include brake fluid flush and module programming if required. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Nissan Murano ABS Module

$

Current avg: $169 — we suggest $144 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2024)

(assembly), AWD31 listings$275$125 – $466
(assembly), FWD26 listingsInterchange 2021–2023$190$75 – $495

Model-year comparison

What does a Nissan Murano ABS module cost by year?

$96$138$180$222$26420152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Nissan Murano ABS module cost?

Asking prices for a used Nissan Murano ABS module are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 72% premium over grade-C stock, with grade-A medians at $150.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, (assembly), FWD, lists at a $190 median, while (assembly), AWD commands $275, a 45% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2015 units carry the lowest median at $107, while 2024 tops the table at $251. Parts from 2015–2017 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 3 compatible years.

Against comparable vehicles, the Nissan Murano sits level with the Honda Civic ($150), 17% below the Honda CRV ($180), and 3% above the Nissan Rogue ($146) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used ABS module: what to check

  1. Verify option code compatibility: Exact matching of vehicle traction control, stability control, and wheel-speed sensor options is required because mismatched modules cannot be recoded.
  2. Inspect connector pins for liquid intrusion: Check for green copper oxidation, melted pin housings, or burnt traces inside the harness plug caused by leaking brake fluid.
  3. Confirm hydraulic block port sealing: Ensure all hydraulic line ports remained capped during storage to prevent internal solenoid valve corrosion and dirt contamination.
  4. Purchase pump and ECU together: Buying the combined hydraulic block and electronic control unit prevents internal seal damage caused by bench separation.
  5. Plan for bi-directional scan tool bleeding: Budget time for an automated scan tool system bleed and steering angle sensor calibration immediately after installation.

Keep browsing this vehicle

What other Nissan Murano parts are priced?

Price comparisons

Compare Nissan Murano ABS module prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Nissan Murano ABS module FAQ

How much is a used ABS module for a Nissan Murano?

The median asking price is $150 across 1,836 priced listings from 436 yards. Grade-A units, the cleanest stock, have a median of $150. 2015 is the cheapest model year we track, with a median of $107.

How much does it cost to replace a Nissan Murano ABS module?

Using a used part, a Nissan Murano ABS module replacement typically runs $245–$600 all-in: the median used ABS module for this model lists at $150, and independent-shop labor for ABS module replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). The labor figure does not include brake fluid flush and module programming if required. Labor is a national part-level estimate, not a quote for your vehicle.

Which Nissan Murano model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Nissan Murano ABS module years are interchangeable?

Salvage-yard interchange data links Nissan Murano ABS module fitments across 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 11 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Nissan Murano ABS Module Cost — From $35 to $607