Used Acura RDX control arm from a salvage yard

Vehicle-specific price guide

How much is a used Acura RDX control arm?

Asking prices from 257 salvage yards in 38 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 22, 2026
Strong coverage845 priced of 1,030 observed2 variantsMethodology v2.1 →

Part overview

About the Acura RDX control arm

What the control arm does, common failure signs, and prices across all vehicles: used control arm price guide →

Also known asLower Control ArmA-ArmWishbone
Price summary

A used Acura RDX control arm costs $30 to $355, with a median asking price of $128. Based on 845 priced salvage yard listings across the US, compatible across 2013–2024 (12 model years), updated Oct 22, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$135
Grade B (good)$154
Grade C (fair)$91

Acura RDX control arm price snapshot

USD
Low
$30
Average
$144
High
$355
1,030 listings observed · 845 priced9d ago· How we price·

Report incorrect price

Reporting price for Acura RDX Control Arm

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$36–$355582 listings
Grade BStandard used$50–$260204 listings
Grade CVisible wear$91–$911 listings
Grade XUngraded$30–$16058 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $30–$355 overall range

Regional supply

Where the Acura RDX control arm is listed

We found priced Acura RDX control arm listings at 257 salvage yards across 38 states. Texas supplies the most, with 135 listings (12% of the total) from 25 yards. Location matters: yards in California ask a median $85, while Michigan yards ask $189, 122% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Texas13525$91-29%
California12812$85-34%
North Carolina10620$100-22%
Minnesota568$149+16%
Tennessee4913$186+45%
Florida4512$170+33%
Michigan3913$189+48%
Colorado374$157+23%

States with at least 10 priced listings. % is versus the $128 national median.

Replacement cost

What is the Acura RDX control arm replacement cost?

ESTIMATE
Used part
$128
Acura RDX median asking price
Labor
$95–$450
1–3 hours at $95–$150/hr
Estimated total
$225–$580
median used part + labor

Labor is a typical independent-shop range for control arm replacement, not a quote for your vehicle; it does not include a wheel alignment after installation. The part price is the live median from the salvage-yard listings on this page. Full control arm replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Acura RDX Control Arm

$

Current avg: $144 — we suggest $122 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

RH43 listingsInterchange 2019–2024$160$75 – $355
LH42 listingsInterchange 2019–2023$168$75 – $355

Model-year comparison

What does a Acura RDX control arm cost by year?

$68$102$136$170$20520152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Acura RDX control arm cost?

Asking prices for a used Acura RDX control arm are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 48% premium over grade-C stock, with grade-A medians at $135.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, RH, lists at a $160 median, while LH commands $168, a 5% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2015 units carry the lowest median at $75, while 2024 tops the table at $195. Parts from 2013–2015 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 3 compatible years.

Against comparable vehicles, the Acura RDX sits 34% below the Toyota 4Runner ($193), 29% below the Mercedes S Class ($180), and 28% above the Mercedes E Class ($100) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used control arm: what to check

  1. Inspect ball joint boot and stud play: Check for torn rubber dust boots, cracked grease seals, or lateral movement in the ball joint stud when flexed with a pry bar.
  2. Check rubber bushing integrity: Look for dry-rotted, torn, or fluid-leaking hydraulic suspension bushings where the arm mounts to the subframe.
  3. Verify structural straightness against factory specs: Compare the arm against original dimensions to spot subtle bends caused by curb strikes or suspension impacts.
  4. Confirm ball joint attachment design: Determine whether the arm uses a bolt-on ball joint or an integrated press-fit socket to anticipate future maintenance needs.
  5. Torque bushing bolts at ride height only: Tightening subframe pivot bolts while the vehicle is raised on jacks twists rubber bushings and causes premature tearing.

Keep browsing this vehicle

What other Acura RDX parts are priced?

Price comparisons

Compare Acura RDX control arm prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Acura RDX control arm FAQ

How much is a used control arm for a Acura RDX?

The median asking price is $128 across 845 priced listings from 257 yards. Grade-A units, the cleanest stock, have a median of $135. 2015 is the cheapest model year we track, with a median of $75.

How much does it cost to replace a Acura RDX control arm?

Using a used part, a Acura RDX control arm replacement typically runs $225–$580 all-in: the median used control arm for this model lists at $128, and independent-shop labor for control arm replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). The labor figure does not include a wheel alignment after installation. Labor is a national part-level estimate, not a quote for your vehicle.

Which Acura RDX model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Acura RDX control arm years are interchangeable?

Salvage-yard interchange data links Acura RDX control arm fitments across 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024. Searching all 12 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Acura RDX Control Arm Cost — From $30 to $355