GMC Canyon door assembly price snapshot
- Low
- $150
- Average
- $529
- High
- $1,495
Vehicle-specific price guide
How much is a used GMC Canyon door assembly?
Asking prices from 167 salvage yards in 22 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 20, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the GMC Canyon door assembly
What the door assembly does, common failure signs, and prices across all vehicles: used door assembly price guide →
Also known asFront DoorDoor Shell
Price summary
A used GMC Canyon door assembly costs $150 to $1,495, with a median asking price of $495. Based on 929 priced salvage yard listings across the US, compatible across 2015–2026 (12 model years), updated Sep 20, 2026. Prices exclude shipping, core charges, and installation.
USD
Regional supply
Where the GMC Canyon door assembly is listed
We found priced GMC Canyon door assembly listings at 167 salvage yards across 22 states. California supplies the most, with 254 listings (27% of the total) from 45 yards. Location matters: yards in Florida ask a median $404, while Colorado yards ask $855, 112% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| California | 254 | 45 | $546+10% |
| Illinois | 190 | 16 | $452-9% |
| Florida | 190 | 36 | $404-18% |
| Indiana | 69 | 11 | $504+2% |
| Colorado | 60 | 3 | $855+73% |
| Ohio | 57 | 7 | $450-9% |
| Wisconsin | 24 | 10 | $520+5% |
| Michigan | 21 | 13 | $450-9% |
States with at least 10 priced listings. % is versus the $495 national median.
Replacement cost
What is the GMC Canyon door assembly replacement cost?
- Used part
- $495
- GMC Canyon median asking price
- Labor
- $240–$750
- 2.5–5 hours at $95–$150/hr
- Estimated total
- $735–$1,245
- median used part + labor
Labor is a typical independent-shop range for door assembly replacement, not a quote for your vehicle; it does not include paint and refinishing if not color-matched, and interior trim transfer. The part price is the live median from the salvage-yard listings on this page. How we price
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a GMC Canyon door assembly cost by year?
202596 listings$606$234 – $1,495202417 listingsFits 2 years$737$499 – $1,162202397 listingsFits 4 years$855$389 – $1,1152022100 listingsFits 8 years$550$180 – $8502021100 listingsFits 8 years$428$150 – $8912020100 listingsFits 8 years$454$175 – $7272019100 listingsFits 8 years$550$180 – $8502018100 listingsFits 8 years$454$175 – $7272017200 listingsFits 8 years$536$180 – $8792016100 listingsFits 8 years$356$150 – $7782015100 listingsFits 8 years$450$150 – $875
Market analysis
How much does a used GMC Canyon door assembly cost?
Asking prices for a used GMC Canyon door assembly are unusually spread out: the top listing asks about 10 times what the cheapest does, so which unit you pick matters more than the median.
Model year matters too: 2016 units carry the lowest median at $356, while 2023 tops the table at $855. Parts from 2015–2022 are interchangeable, so if the 2016 fits your vehicle, it offers the best value across 8 compatible years.
Against comparable vehicles, the GMC Canyon sits 1% above the Ford Transit ($492), 33% below the Mercedes C Class ($735), and 33% below the Ford Explorer ($735) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used door assembly: what to check
- Inspect bottom pinch welds for hidden rust: Check the lower inner door seam for bubbling paint, cracked seam sealer, or clogged drain holes that trap water.
- Confirm harness connector pin count: Verify the main pillar door plug matches your vehicle harness to support power folding mirrors, memory seats, and speaker channels.
- Verify glass tint color and motor operation: Test that the power window glides smoothly and that the factory glass tint matches your vehicle's remaining windows.
- Check hinge pin slop and check-strap mounts: Lift up on the rear door edge to detect worn hinge pins or cracked sheet metal around the check-strap anchor.
- Transfer original door lock cylinders: Swap over your original key tumbler during installation to retain physical key access during dead-battery emergencies.
Keep browsing this vehicle
What other GMC Canyon parts are priced?
01wide ±198%
Transmission Control Module
$106median
$20$440
02wide ±290%
Car Radio
$120median
$25$722
03wide ±174%
Front Seat
$211median
$61$795
04wide ±214%
Air Bag
$223median
$45$1,000
05wide ±120%
Drive Shaft
$191median
$60$520
06wide ±201%
Wheels
$200median
$47$850
07wide ±156%
Side Mirror
$186median
$41$620
08wide ±115%
Transmission
$1,975median
$544$5,087
09wide ±79%
Quarter Panel
$606median
$266$1,225
10wide ±146%
Center Console
$159median
$35$500
11wide ±132%
AC Condenser
$159median
$40$460
12wide ±265%
Fuel Pump
$118median
$25$650
Price comparisons
Compare GMC Canyon door assembly prices
Door Assemblycompare
FordTransitvsGMCCanyon
Transit$492
Canyon$495
$3 diff6,782 listings
Door AssemblycompareMercedesCClassvsGMCCanyon
Class$735
Canyon$495
$240 diff6,498 listings
Door AssemblycompareFordExplorervsGMCCanyon
Explorer$735
Canyon$495
$240 diff6,159 listings
Door AssemblycompareHyundaiElantravsGMCCanyon
Elantra$425
Canyon$495
$70 diff5,386 listings
Door AssemblycompareRam3500vsGMCCanyon
3500$695
Canyon$495
$200 diff5,131 listings
Door AssemblycompareRam2500vsGMCCanyon
2500$650
Canyon$495
$155 diff5,035 listings
Compare fitments
What do similar vehicles charge for this part?
Acurawide ±134%
Acura ILX
$500median
$150$1,490
Acuraspread ±44%
Acura Integra
$850median
$550$1,300
Acurawide ±89%
Acura MDX
$1,195median
$200$2,320
Acurawide ±89%
Acura RDX
$1,000median
$400$2,184
Acurawide ±79%
Acura TLX
$868median
$349$1,720
Audiwide ±109%
Audi A4
$800median
$150$1,899
Audiwide ±244%
Audi A6
$420median
$100$2,153
Audiwide ±91%
Audi Q3
$946median
$200$1,922
GMCwide ±114%
GMC Acadia
$657median
$225$1,728
GMCwide ±112%
GMC Sierra 1500
$716median
$180$1,785
GMCwide ±72%
GMC Terrain
$946median
$362$1,725
GMCwide ±104%
GMC Yukon
$1,000median
$200$2,278
Common questions
GMC Canyon door assembly FAQ
How much is a used door assembly for a GMC Canyon?
The median asking price is $495 across 929 priced listings from 167 yards. 2016 is the cheapest model year we track, with a median of $356.
How much does it cost to replace a GMC Canyon door assembly?
Using a used part, a GMC Canyon door assembly replacement typically runs $735–$1,245 all-in: the median used door assembly for this model lists at $495, and independent-shop labor for door assembly replacement typically takes 2.5–5 hours at $95–$150/hr ($240–$750). The labor figure does not include paint and refinishing if not color-matched, and interior trim transfer. Labor is a national part-level estimate, not a quote for your vehicle.
Which GMC Canyon model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which GMC Canyon door assembly years are interchangeable?
Salvage-yard interchange data links GMC Canyon door assembly fitments across 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026. Searching all 12 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.