GMC Canyon wheels price snapshot
- Low
- $47
- Average
- $221
- High
- $850
Vehicle-specific price guide
How much is a used GMC Canyon wheels?
Asking prices from 419 salvage yards in 39 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 22, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the GMC Canyon wheels
What the wheels does, common failure signs, and prices across all vehicles: used wheels price guide →
Also known asRimsCar RimsTruck RimsFactory WheelsOEM WheelsAlloy WheelsWheel Rim
Price summary
A used GMC Canyon wheels costs $47 to $850, with a median asking price of $200. Based on 2,838 priced salvage yard listings across the US, compatible across 2015–2026 (12 model years), updated Sep 22, 2026. Prices exclude shipping, core charges, and installation.
USD
Regional supply
Where the GMC Canyon wheels is listed
We found priced GMC Canyon wheels listings at 419 salvage yards across 39 states. Illinois supplies the most, with 385 listings (13% of the total) from 23 yards. Location matters: yards in Georgia ask a median $116, while Michigan yards ask $250, 116% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| Illinois | 385 | 23 | $216+8% |
| Florida | 346 | 40 | $155-22% |
| Michigan | 269 | 32 | $250+25% |
| California | 231 | 46 | $151-24% |
| Indiana | 217 | 17 | $193-4% |
| Georgia | 216 | 23 | $116-42% |
| Wisconsin | 139 | 18 | $221+11% |
| Colorado | 102 | 11 | $161-19% |
States with at least 10 priced listings. % is versus the $200 national median.
Replacement cost
What is the GMC Canyon wheels replacement cost?
- Used part
- $200
- GMC Canyon median asking price
- Labor
- $25–$75
- 0.25–0.5 hours at $95–$150/hr
- Estimated total
- $225–$275
- median used part + labor
Labor is a typical independent-shop range for wheels replacement, not a quote for your vehicle; it does not include tire mounting and balancing per wheel. The part price is the live median from the salvage-yard listings on this page. How we price
Sources
- Labor time estimates: Part Price Guide labor database
17x8-1/2 (Beadlock with laser etching and AEV cap)
1 listings$499$499 – $499Model-year comparison
What does a GMC Canyon wheels cost by year?
2025114 listingsFits 5 years$312$99 – $6172024144 listingsFits 8 years$250$99 – $5622023328 listingsFits 8 years$295$50 – $7182022346 listingsFits 8 years$183$60 – $6502021349 listingsFits 8 years$225$50 – $6002020719 listingsFits 8 years$170$50 – $8502018363 listingsFits 8 years$205$50 – $8502017370 listingsFits 8 years$205$50 – $8502016306 listingsFits 8 years$140$47 – $8502015148 listingsFits 8 years$131$49 – $600
Market analysis
How much does a used GMC Canyon wheels cost?
Asking prices for a used GMC Canyon wheels are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 17x8, steel (opt RM7, opt RPP), lists at a $174 median, while 20x9, (6 spoke), U spoke (opt SNX) commands $502, a 189% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2015 units carry the lowest median at $131, while 2025 tops the table at $312. Parts from 2015–2022 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 8 compatible years.
Against comparable vehicles, the GMC Canyon sits 7% below the Ram 1500 ($214), 25% below the Chevy Silverado 1500 ($266), and 23% below the GMC Sierra 1500 ($260) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used wheels: what to check
- Inspect rim lip and barrel for bends or cracks: Spin the wheel on a balancer to check inner and outer bead lips for subtle bends, curb gouges, or hair cracks.
- Verify bolt pattern, hub bore, and offset specs: Confirm bolt circle diameter, center hub bore, and wheel offset match your vehicle hub clearance.
- Check lug nut seat holes for elongation: Inspect lug taper holes for wallowed-out steel inserts or cracked aluminum caused by over-torqued lug nuts.
- Confirm tire pressure monitor sensor presence: Check whether original TPMS sensor valves remain installed or if rubber snap-in valves replaced them.
- Torque lug nuts in a star pattern to spec: Use a torque wrench to tighten lug nuts in a cross pattern to prevent warping brake rotors.
Keep browsing this vehicle
What other GMC Canyon parts are priced?
01wide ±198%
Transmission Control Module
$106median
$20$440
02wide ±290%
Car Radio
$120median
$25$722
03wide ±174%
Front Seat
$211median
$61$795
04wide ±214%
Air Bag
$223median
$45$1,000
05wide ±120%
Drive Shaft
$191median
$60$520
06wide ±156%
Side Mirror
$186median
$41$620
07wide ±115%
Transmission
$1,975median
$544$5,087
08wide ±79%
Quarter Panel
$606median
$266$1,225
09wide ±146%
Center Console
$159median
$35$500
10wide ±132%
AC Condenser
$159median
$40$460
11wide ±265%
Fuel Pump
$118median
$25$650
12wide ±165%
Engine Computer
$126median
$30$445
Price comparisons
Compare GMC Canyon wheels prices
Wheelscompare
Ram1500vsGMCCanyon
1500$214
Canyon$200
$14 diff16,129 listings
WheelscompareChevySilverado1500vsGMCCanyon
1500$266
Canyon$200
$66 diff15,555 listings
WheelscompareGMCSierra1500vsGMCCanyon
1500$260
Canyon$200
$60 diff13,719 listings
WheelscompareMercedesCClassvsGMCCanyon
Class$400
Canyon$200
$200 diff13,558 listings
WheelscompareChevyTahoevsGMCCanyon
Tahoe$275
Canyon$200
$75 diff12,616 listings
WheelscompareRam3500vsGMCCanyon
3500$250
Canyon$200
$50 diff11,977 listings
Compare fitments
What do similar vehicles charge for this part?
BMWwide ±223%
BMW X3
$250median
$49$1,162
BMWwide ±213%
BMW X5
$376median
$65$1,666
Chevywide ±229%
Chevy Equinox
$178median
$35$850
Chevywide ±254%
Chevy Malibu
$150median
$25$788
Chevywide ±215%
Chevy Silverado 1500
$266median
$54$1,200
Chevywide ±233%
Chevy Tahoe
$275median
$55$1,336
Chevywide ±139%
Chevy Traverse
$200median
$39$595
Dodgewide ±230%
Dodge Challenger
$279median
$51$1,335
Dodgewide ±275%
Dodge Charger
$220median
$39$1,250
Dodgewide ±241%
Dodge Durango
$200median
$35$1,000
GMCwide ±210%
GMC Sierra 1500
$260median
$60$1,150
GMCwide ±197%
GMC Yukon
$300median
$67$1,250
Common questions
GMC Canyon wheels FAQ
How much is a used wheels for a GMC Canyon?
The median asking price is $200 across 2,838 priced listings from 419 yards. 2015 is the cheapest model year we track, with a median of $131.
How much does it cost to replace a GMC Canyon wheels?
Using a used part, a GMC Canyon wheels replacement typically runs $225–$275 all-in: the median used wheels for this model lists at $200, and independent-shop labor for wheels replacement typically takes 0.25–0.5 hours at $95–$150/hr ($25–$75). The labor figure does not include tire mounting and balancing per wheel. Labor is a national part-level estimate, not a quote for your vehicle.
Which GMC Canyon model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which GMC Canyon wheels years are interchangeable?
Salvage-yard interchange data links GMC Canyon wheels fitments across 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026. Searching all 12 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.