Vehicle-specific price guide

How much is a used GMC Sierra 1500 door assembly?

Asking prices from 316 salvage yards in 29 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 22, 2026
Strong coverage3,241 priced of 3,852 observed9 variantsMethodology v2.1 →

Part overview

About the GMC Sierra 1500 door assembly

What the door assembly does, common failure signs, and prices across all vehicles: used door assembly price guide →

Also known asFront DoorDoor Shell
Price summary

A used GMC Sierra 1500 door assembly costs $180 to $1,785, with a median asking price of $716. Based on 3,241 priced salvage yard listings across the US, compatible across 2014–2026 (13 model years), updated Sep 22, 2026. Prices exclude shipping, core charges, and installation.

GMC Sierra 1500 door assembly price snapshot

USD
Low
$180
Average
$759
High
$1,785
3,852 listings observed · 3,241 priced1mo ago· How we price·

Report incorrect price

Reporting price for GMC Sierra 1500 Door Assembly

Reason

Regional supply

Where the GMC Sierra 1500 door assembly is listed

We found priced GMC Sierra 1500 door assembly listings at 316 salvage yards across 29 states. California supplies the most, with 732 listings (22% of the total) from 78 yards. Location matters: yards in Florida ask a median $400, while Colorado yards ask $1,575, 294% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California73278$655-9%
Illinois50714$1,004+40%
Florida46151$400-44%
Arizona37722$450-37%
Indiana3515$715
Texas24959$443-38%
Colorado1035$1,575+120%
Utah968$1,010+41%

States with at least 10 priced listings. % is versus the $716 national median.

Replacement cost

What is the GMC Sierra 1500 door assembly replacement cost?

ESTIMATE
Used part
$716
GMC Sierra 1500 median asking price
Labor
$240–$750
2.5–5 hours at $95–$150/hr
Estimated total
$955–$1,465
median used part + labor

Labor is a typical independent-shop range for door assembly replacement, not a quote for your vehicle; it does not include paint and refinishing if not color-matched, and interior trim transfer. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for GMC Sierra 1500 Door Assembly

$

Current avg: $759 — we suggest $645 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

Double Cab, RH, express power down only (opt AED)50 listingsInterchange 2019–2025$756$569 – $1,294
Crew Cab, LH29 listingsInterchange 2021–2025$675$675 – $1,359
Crew Cab, RH, express power up and down (opt AEF)29 listingsInterchange 2019–2025$732$617 – $1,365
Double Cab, RH, express power up and down (opt AEF)29 listingsInterchange 2019–2025$732$617 – $1,365
Crew Cab, RH, express power down only (opt AED)27 listingsInterchange 2019–2025$1,004$569 – $1,173
Standard Cab, LH27 listingsInterchange 2020–2024$929$450 – $1,113
Standard Cab, RH, express power down only26 listingsInterchange 2019–2024$1,125$400 – $1,394
Double Cab, LH10 listingsInterchange 2021–2025$732$675 – $1,359

Standard Cab, RH, express power up and down

3 listings
Interchange 2024–2025$750$745 – $777

Model-year comparison

What does a GMC Sierra 1500 door assembly cost by year?

$297$505$712$920$1,12820152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used GMC Sierra 1500 door assembly cost?

Asking prices for a used GMC Sierra 1500 door assembly are unusually spread out: the top listing asks about 10 times what the cheapest does, so which unit you pick matters more than the median.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, Crew Cab, LH, lists at a $675 median, while Standard Cab, RH, express power down only commands $1,125, a 67% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2017 units carry the lowest median at $330, while 2022 tops the table at $1,074. Parts from 2014–2019 are interchangeable, so if the 2017 fits your vehicle, it offers the best value across 6 compatible years.

Against comparable vehicles, the GMC Sierra 1500 sits 46% above the Ford Transit ($492), 3% below the Mercedes C Class ($735), and 3% below the Ford Explorer ($735) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used door assembly: what to check

  1. Inspect bottom pinch welds for hidden rust: Check the lower inner door seam for bubbling paint, cracked seam sealer, or clogged drain holes that trap water.
  2. Confirm harness connector pin count: Verify the main pillar door plug matches your vehicle harness to support power folding mirrors, memory seats, and speaker channels.
  3. Verify glass tint color and motor operation: Test that the power window glides smoothly and that the factory glass tint matches your vehicle's remaining windows.
  4. Check hinge pin slop and check-strap mounts: Lift up on the rear door edge to detect worn hinge pins or cracked sheet metal around the check-strap anchor.
  5. Transfer original door lock cylinders: Swap over your original key tumbler during installation to retain physical key access during dead-battery emergencies.

Keep browsing this vehicle

What other GMC Sierra 1500 parts are priced?

Price comparisons

Compare GMC Sierra 1500 door assembly prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

GMC Sierra 1500 door assembly FAQ

How much is a used door assembly for a GMC Sierra 1500?

The median asking price is $716 across 3,241 priced listings from 316 yards. 2017 is the cheapest model year we track, with a median of $330.

How much does it cost to replace a GMC Sierra 1500 door assembly?

Using a used part, a GMC Sierra 1500 door assembly replacement typically runs $955–$1,465 all-in: the median used door assembly for this model lists at $716, and independent-shop labor for door assembly replacement typically takes 2.5–5 hours at $95–$150/hr ($240–$750). The labor figure does not include paint and refinishing if not color-matched, and interior trim transfer. Labor is a national part-level estimate, not a quote for your vehicle.

Which GMC Sierra 1500 model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which GMC Sierra 1500 door assembly years are interchangeable?

Salvage-yard interchange data links GMC Sierra 1500 door assembly fitments across 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026. Searching all 13 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used GMC Sierra 1500 Door Assembly Cost — From $180 to $1,785