GMC Canyon engine computer price snapshot
- Low
- $30
- Average
- $146
- High
- $445
Vehicle-specific price guide
How much is a used GMC Canyon engine computer?
Asking prices from 288 salvage yards in 38 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 21, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the GMC Canyon engine computer
What the engine computer does, common failure signs, and prices across all vehicles: used engine computer price guide →
Also known asECUECMPCMEngine Control ModuleEngine Control UnitPowertrain Control Module
Price summary
A used GMC Canyon engine computer costs $30 to $445, with a median asking price of $126. Based on 1,420 priced salvage yard listings across the US, compatible across 2014–2026 (13 model years), updated Oct 21, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$142
Grade B (good)$145
Grade C (fair)$72
USD
Condition comparison
Price by part grade
Grade AClean / low wear$40–$4121,021 listings
Grade BStandard used$50–$390287 listings
Grade CVisible wear$61–$745 listings
Grade XUngraded$30–$445107 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $40–$412 | 1,021 | |
| Grade BStandard used | $50–$390 | 287 | |
| Grade CVisible wear | $61–$74 | 5 | |
| Grade XUngraded | $30–$445 | 107 |
Median by grade
Grade price comparison
Grade A$142
Grade B$145
Grade C$72
Ungraded$60
Median asking price by seller-reported condition grade · $30–$445 overall range
Regional supply
Where the GMC Canyon engine computer is listed
We found priced GMC Canyon engine computer listings at 288 salvage yards across 38 states. Illinois supplies the most, with 383 listings (24% of the total) from 23 yards. Location matters: yards in Florida ask a median $70, while Michigan yards ask $155, 121% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| Illinois | 383 | 23 | $146+16% |
| Texas | 239 | 22 | $85-33% |
| Florida | 162 | 24 | $70-44% |
| Michigan | 123 | 38 | $155+23% |
| Wisconsin | 70 | 21 | $108-14% |
| California | 63 | 24 | $100-21% |
| North Carolina | 52 | 15 | $150+19% |
| Indiana | 51 | 13 | $128+2% |
States with at least 10 priced listings. % is versus the $126 national median.
Replacement cost
What is the GMC Canyon engine computer replacement cost?
- Used part
- $126
- GMC Canyon median asking price
- Labor
- $95–$450
- 1–3 hours at $95–$150/hr
- Estimated total
- $220–$575
- median used part + labor
Labor is a typical independent-shop range for engine computer replacement, not a quote for your vehicle; it does not include programming and key relearn procedure. The part price is the live median from the salvage-yard listings on this page. Full engine computer replacement cost breakdown
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a GMC Canyon engine computer cost by year?
2025100 listings$202$50 – $249202450 listingsFits 4 years$131$40 – $245202350 listingsFits 5 years$186$99 – $2322022191 listingsFits 8 years$125$40 – $4452021192 listingsFits 7 years$99$52 – $4452020192 listingsFits 7 years$99$52 – $4452019200 listingsFits 10 years$146$42 – $3252018200 listingsFits 8 years$99$40 – $3252017200 listingsFits 10 years$146$42 – $325201690 listingsFits 6 years$93$30 – $3852015150 listingsFits 3 years$126$40 – $263
Market analysis
How much does a used GMC Canyon engine computer cost?
Asking prices for a used GMC Canyon engine computer are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 97% premium over grade-C stock, with grade-A medians at $142.
Model year matters too: 2016 units carry the lowest median at $93, while 2025 tops the table at $202. Parts from 2014–2019 are interchangeable, so if the 2016 fits your vehicle, it offers the best value across 6 compatible years.
Against comparable vehicles, the GMC Canyon sits 13% above the Honda Accord ($112), 14% above the Honda Civic ($111), and level with the Hyundai Elantra ($126) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used engine computer: what to check
- Match hardware and service numbers: Ensure hardware revision codes and circuit board part numbers match exactly, as pinouts change mid-model year.
- Inspect multi-pin connector headers: Check header pins for bending, green copper oxidation, or burnt circuit board traces inside the wiring sockets.
- Verify immobilizer programming requirements: Plan for anti-theft security relearn procedures or ECU re-flashing before the replacement computer will start the engine.
- Confirm donor transmission and emissions spec: Ensure the donor vehicle used the same transmission type and regional emissions package to prevent fault codes.
- Check aluminum casing seals: Inspect housing screws and perimeter rubber gaskets for white oxidation or breaks that indicate past water intrusion.
Keep browsing this vehicle
What other GMC Canyon parts are priced?
01wide ±198%
Transmission Control Module
$106median
$20$440
02wide ±290%
Car Radio
$120median
$25$722
03wide ±174%
Front Seat
$211median
$61$795
04wide ±214%
Air Bag
$223median
$45$1,000
05wide ±120%
Drive Shaft
$191median
$60$520
06wide ±201%
Wheels
$200median
$47$850
07wide ±156%
Side Mirror
$186median
$41$620
08wide ±115%
Transmission
$1,975median
$544$5,087
09wide ±79%
Quarter Panel
$606median
$266$1,225
10wide ±146%
Center Console
$159median
$35$500
11wide ±132%
AC Condenser
$159median
$40$460
12wide ±265%
Fuel Pump
$118median
$25$650
Price comparisons
Compare GMC Canyon engine computer prices
Engine Computercompare
HondaAccordvsGMCCanyon
Accord$112
Canyon$126
$14 diff9,625 listings
Engine ComputercompareHondaCivicvsGMCCanyon
Civic$111
Canyon$126
$15 diff9,460 listings
Engine ComputercompareHyundaiElantravsGMCCanyon
Elantra$126
Canyon$126
$0 diff9,016 listings
Engine ComputercompareHondaPilotvsGMCCanyon
Pilot$125
Canyon$126
$1 diff6,533 listings
Engine ComputercompareHyundaiTucsonvsGMCCanyon
Tucson$156
Canyon$126
$30 diff6,226 listings
Engine ComputercompareFordF250vsGMCCanyon
F250$250
Canyon$126
$124 diff5,585 listings
Compare fitments
What do similar vehicles charge for this part?
Acurawide ±167%
Acura ILX
$138median
$40$500
Acurawide ±153%
Acura Integra
$155median
$50$525
Acurawide ±219%
Acura MDX
$135median
$35$625
Acurawide ±162%
Acura RDX
$155median
$42$543
Acurawide ±208%
Acura TLX
$125median
$33$553
Audiwide ±174%
Audi A4
$175median
$35$644
Audiwide ±122%
Audi A6
$184median
$50$500
Audiwide ±188%
Audi Q3
$200median
$50$800
GMCwide ±182%
GMC Acadia
$95median
$40$385
GMCwide ±150%
GMC Sierra 1500
$137median
$30$440
GMCwide ±204%
GMC Terrain
$94median
$30$413
GMCwide ±123%
GMC Yukon
$150median
$40$410
Common questions
GMC Canyon engine computer FAQ
How much is a used engine computer for a GMC Canyon?
The median asking price is $126 across 1,420 priced listings from 288 yards. Grade-A units, the cleanest stock, have a median of $142. 2016 is the cheapest model year we track, with a median of $93.
How much does it cost to replace a GMC Canyon engine computer?
Using a used part, a GMC Canyon engine computer replacement typically runs $220–$575 all-in: the median used engine computer for this model lists at $126, and independent-shop labor for engine computer replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). The labor figure does not include programming and key relearn procedure. Labor is a national part-level estimate, not a quote for your vehicle.
Which GMC Canyon model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which GMC Canyon engine computer years are interchangeable?
Salvage-yard interchange data links GMC Canyon engine computer fitments across 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026. Searching all 13 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.