Used GMC Yukon engine from a salvage yard

Vehicle-specific price guide

How much is a used GMC Yukon engine?

Asking prices from 213 salvage yards in 24 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 20, 2026
Strong coverage957 priced of 1,141 observed3 variantsMethodology v2.1 →

Part overview

About the GMC Yukon engine

What the engine does, common failure signs, and prices across all vehicles: used engine price guide →

Also known asMotorEngine Assembly
Price summary

A used GMC Yukon engine costs $1,250 to $12,637, with a median asking price of $4,523. Based on 957 priced salvage yard listings across the US, compatible across 2014–2026 (13 model years), updated Oct 20, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$5,000
Grade B (good)$3,950
Grade C (fair)$2,500

GMC Yukon engine price snapshot

USD
Low
$1,250
Average
$4,945
High
$12,637
1,141 listings observed · 957 priced11d ago· How we price·

Report incorrect price

Reporting price for GMC Yukon Engine

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$1,250–$12,637511 listings
Grade BStandard used$1,480–$9,300263 listings
Grade CVisible wear$1,700–$3,9008 listings
Grade XUngraded$1,500–$9,330175 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $1,250–$12,637 overall range

Regional supply

Where the GMC Yukon engine is listed

We found priced GMC Yukon engine listings at 213 salvage yards across 24 states. Texas supplies the most, with 572 listings (44% of the total) from 65 yards. Location matters: yards in Ohio ask a median $2,299, while Colorado yards ask $8,475, 269% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Texas57265$4,409-3%
Colorado1078$8,475+87%
California10240$4,192-7%
Illinois879$2,762-39%
Arizona8617$3,872-14%
Georgia757$2,773-39%
Florida367$2,442-46%
Ohio322$2,299-49%

States with at least 10 priced listings. % is versus the $4,523 national median.

Replacement cost

What is the GMC Yukon engine replacement cost?

ESTIMATE
Used part
$4,523
GMC Yukon median asking price
Labor
$950–$3,000
10–20 hours at $95–$150/hr
Estimated total
$5,475–$7,525
median used part + labor

Labor is a typical independent-shop range for engine replacement, not a quote for your vehicle; it does not include fluids, gaskets, and any while-in-there parts like mounts or a clutch. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for GMC Yukon Engine

$

Current avg: $4,945 — we suggest $4,203 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2024)

6.2L (VIN L, 8th digit, opt L87)50 listingsInterchange 2021–2026$7,750$4,500 – $11,497
3.0L (VIN T, 8th digit, opt LM2, turbo diesel)46 listingsInterchange 2020–2024$6,133$1,480 – $7,750
5.3L (VIN D, 8th digit opt L84)45 listingsInterchange 2022–2025$3,900$2,595 – $4,500

Model-year comparison

What does a GMC Yukon engine cost by year?

$2,249$3,236$4,222$5,209$6,1952015201620172018201920202021202220232024
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used GMC Yukon engine cost?

Asking prices for a used GMC Yukon engine are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 100% premium over grade-C stock, with grade-A medians at $5,000.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 5.3L (VIN D, 8th digit opt L84), lists at a $3,900 median, while 6.2L (VIN L, 8th digit, opt L87) commands $7,750, a 99% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2016 units carry the lowest median at $2,499, while 2024 tops the table at $5,900. Parts from 2014–2019 are interchangeable, so if the 2016 fits your vehicle, it offers the best value across 6 compatible years.

Against comparable vehicles, the GMC Yukon sits 82% above the Hyundai Elantra ($2,483), 471% above the Honda Civic ($792), and 126% above the Toyota RAV4 ($2,000) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used engine: what to check

  1. Ask for a compression or leak-down test result. Reputable yards test engines before sale.
  2. Under 100K miles is the sweet spot for a used engine; insist on documented donor mileage.
  3. Confirm what's included: manifolds, sensors, and accessories vary by yard and change the real price.
  4. Match the engine code exactly. The same model year can ship with multiple displacements.
  5. Budget for new gaskets, seals, and fluids on installation; they're cheap insurance on a used engine.

Keep browsing this vehicle

What other GMC Yukon parts are priced?

Price comparisons

Compare GMC Yukon engine prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

GMC Yukon engine FAQ

How much is a used engine for a GMC Yukon?

The median asking price is $4,523 across 957 priced listings from 213 yards. Grade-A units, the cleanest stock, have a median of $5,000. 2016 is the cheapest model year we track, with a median of $2,499.

How much does it cost to replace a GMC Yukon engine?

Using a used part, a GMC Yukon engine replacement typically runs $5,475–$7,525 all-in: the median used engine for this model lists at $4,523, and independent-shop labor for engine replacement typically takes 10–20 hours at $95–$150/hr ($950–$3,000). The labor figure does not include fluids, gaskets, and any while-in-there parts like mounts or a clutch. Labor is a national part-level estimate, not a quote for your vehicle.

Which GMC Yukon model years does this price guide cover?

This guide currently has year-level pricing for 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which GMC Yukon engine years are interchangeable?

Salvage-yard interchange data links GMC Yukon engine fitments across 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026. Searching all 13 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used GMC Yukon Engine Cost — From $1,250 to $12,637