Used GMC Sierra 1500 engine from a salvage yard

Vehicle-specific price guide

How much is a used GMC Sierra 1500 engine?

Asking prices from 686 salvage yards in 46 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 31, 2026
Strong coverage2,172 priced of 2,500 observed4 variantsMethodology v2.1 →

Part overview

About the GMC Sierra 1500 engine

What the engine does, common failure signs, and prices across all vehicles: used engine price guide →

Also known asMotorEngine Assembly
Price summary

A used GMC Sierra 1500 engine costs $1,250 to $12,735, with a median asking price of $4,175. Based on 2,172 priced salvage yard listings across the US, compatible across 2014–2026 (13 model years), updated Oct 31, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$4,300
Grade B (good)$4,015
Grade C (fair)$2,455

GMC Sierra 1500 engine price snapshot

USD
Low
$1,250
Average
$4,385
High
$12,735
2,500 listings observed · 2,172 pricedUpdated 1d ago· How we price·

Report incorrect price

Reporting price for GMC Sierra 1500 Engine

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$1,500–$12,7351,169 listings
Grade BStandard used$1,250–$11,573789 listings
Grade CVisible wear$1,600–$3,90013 listings
Grade XUngraded$1,250–$8,322201 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $1,250–$12,735 overall range

Regional supply

Where the GMC Sierra 1500 engine is listed

We found priced GMC Sierra 1500 engine listings at 686 salvage yards across 46 states. Texas supplies the most, with 600 listings (16% of the total) from 66 yards. Location matters: yards in California ask a median $3,512, while Missouri yards ask $5,914, 68% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Texas60066$4,039-3%
Illinois42630$4,088-2%
California36468$3,512-16%
Florida30948$3,985-5%
Georgia22326$3,952-5%
Michigan16845$4,535+9%
Indiana14721$4,069-3%
Missouri12518$5,914+42%

States with at least 10 priced listings. % is versus the $4,175 national median.

Replacement cost

What is the GMC Sierra 1500 engine replacement cost?

ESTIMATE
Used part
$4,175
GMC Sierra 1500 median asking price
Labor
$950–$3,000
10–20 hours at $95–$150/hr
Estimated total
$5,125–$7,175
median used part + labor

Labor is a typical independent-shop range for engine replacement, not a quote for your vehicle; it does not include fluids, gaskets, and any while-in-there parts like mounts or a clutch. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for GMC Sierra 1500 Engine

$

Current avg: $4,385 — we suggest $3,727 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

6.2L (VIN L, 8th digit, opt L87)50 listingsInterchange 2021–2026$7,750$4,500 – $12,637
3.0L (VIN 8, 8th digit, opt LZ0)46 listingsInterchange 2021–2025$6,500$3,200 – $7,200
5.3L (VIN D, 8th digit, opt L84)44 listingsInterchange 2022–2025$3,943$2,795 – $4,500
2.7L (VIN K, 8th digit, opt L3B)42 listingsInterchange 2022–2026$3,733$2,415 – $4,560

Model-year comparison

What does a GMC Sierra 1500 engine cost by year?

$2,768$3,428$4,088$4,748$5,40820152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used GMC Sierra 1500 engine cost?

Asking prices for a used GMC Sierra 1500 engine are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 75% premium over grade-C stock, with grade-A medians at $4,300.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 2.7L (VIN K, 8th digit, opt L3B), lists at a $3,733 median, while 6.2L (VIN L, 8th digit, opt L87) commands $7,750, a 108% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2017 units carry the lowest median at $3,075, while 2024 tops the table at $5,150. Parts from 2014–2020 are interchangeable, so if the 2017 fits your vehicle, it offers the best value across 7 compatible years.

Against comparable vehicles, the GMC Sierra 1500 sits 68% above the Hyundai Elantra ($2,483), 412% above the Honda Civic ($815), and 109% above the Toyota RAV4 ($2,000) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used engine: what to check

  1. Ask for a compression or leak-down test result. Reputable yards test engines before sale.
  2. Under 100K miles is the sweet spot for a used engine; insist on documented donor mileage.
  3. Confirm what's included: manifolds, sensors, and accessories vary by yard and change the real price.
  4. Match the engine code exactly. The same model year can ship with multiple displacements.
  5. Budget for new gaskets, seals, and fluids on installation; they're cheap insurance on a used engine.

Keep browsing this vehicle

What other GMC Sierra 1500 parts are priced?

Price comparisons

Compare GMC Sierra 1500 engine prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

GMC Sierra 1500 engine FAQ

How much is a used engine for a GMC Sierra 1500?

The median asking price is $4,175 across 2,172 priced listings from 686 yards. Grade-A units, the cleanest stock, have a median of $4,300. 2017 is the cheapest model year we track, with a median of $3,075.

How much does it cost to replace a GMC Sierra 1500 engine?

Using a used part, a GMC Sierra 1500 engine replacement typically runs $5,125–$7,175 all-in: the median used engine for this model lists at $4,175, and independent-shop labor for engine replacement typically takes 10–20 hours at $95–$150/hr ($950–$3,000). The labor figure does not include fluids, gaskets, and any while-in-there parts like mounts or a clutch. Labor is a national part-level estimate, not a quote for your vehicle.

Which GMC Sierra 1500 model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which GMC Sierra 1500 engine years are interchangeable?

Salvage-yard interchange data links GMC Sierra 1500 engine fitments across 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026. Searching all 13 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used GMC Sierra 1500 Engine Cost — From $1,250 to $12,735