GMC Canyon fender price snapshot
- Low
- $100
- Average
- $368
- High
- $695
Vehicle-specific price guide
How much is a used GMC Canyon fender?
Asking prices from 283 salvage yards in 45 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 21, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the GMC Canyon fender
What the fender does, common failure signs, and prices across all vehicles: used fender price guide →
Also known asFront FenderFender Panel
Price summary
A used GMC Canyon fender costs $100 to $695, with a median asking price of $359. Based on 829 priced salvage yard listings across the US, compatible across 2015–2026 (12 model years), updated Oct 21, 2026. Prices exclude shipping, core charges, and installation.
USD
Regional supply
Where the GMC Canyon fender is listed
We found priced GMC Canyon fender listings at 283 salvage yards across 45 states. Michigan supplies the most, with 145 listings (13% of the total) from 28 yards. Location matters: yards in Oklahoma ask a median $225, while Wisconsin yards ask $496, 120% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| Michigan | 145 | 28 | $424+18% |
| Texas | 130 | 21 | $325-9% |
| Illinois | 123 | 17 | $300-16% |
| Nebraska | 94 | 4 | $383+7% |
| Indiana | 58 | 9 | $393+9% |
| Wisconsin | 56 | 10 | $496+38% |
| Oklahoma | 55 | 5 | $225-37% |
| Ohio | 42 | 15 | $440+23% |
States with at least 10 priced listings. % is versus the $359 national median.
Replacement cost
What is the GMC Canyon fender replacement cost?
- Used part
- $359
- GMC Canyon median asking price
- Labor
- $190–$600
- 2–4 hours at $95–$150/hr
- Estimated total
- $550–$960
- median used part + labor
Labor is a typical independent-shop range for fender replacement, not a quote for your vehicle; it does not include paint if the panel isn't color-matched. The part price is the live median from the salvage-yard listings on this page. How we price
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a GMC Canyon fender cost by year?
202557 listingsFits 4 years$305$175 – $543202479 listingsFits 4 years$325$175 – $543202399 listingsFits 3 years$250$145 – $4412022100 listingsFits 5 years$300$175 – $5432021100 listingsFits 8 years$477$100 – $6732020100 listingsFits 7 years$479$100 – $673201919 listingsFits 6 years$485$260 – $6102018100 listingsFits 7 years$481$100 – $6732017100 listingsFits 8 years$360$100 – $695201644 listingsFits 8 years$350$150 – $695201584 listingsFits 8 years$363$125 – $695
Market analysis
How much does a used GMC Canyon fender cost?
Asking prices for a used GMC Canyon fender are unusually spread out: the top listing asks about 7 times what the cheapest does, so which unit you pick matters more than the median.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, RH, lists at a $300 median, while LH commands $335, a 12% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2023 units carry the lowest median at $250, while 2019 tops the table at $485. Parts from 2023–2025 are interchangeable, so if the 2023 fits your vehicle, it offers the best value across 3 compatible years.
Against comparable vehicles, the GMC Canyon sits 35% above the Jeep Wrangler ($266), 19% above the Mercedes E Class ($302), and 56% above the Subaru Crosstrek ($230) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used fender: what to check
- Confirm left vs right side. Listings frequently mislabel driver and passenger fenders.
- Check for pulled or elongated bolt holes, a sign of prior collision repair.
- Ask whether the inner liner and moldings are included.
- Same-color panels save paint costs; verify the paint code, not just the color.
Keep browsing this vehicle
What other GMC Canyon parts are priced?
01wide ±198%
Transmission Control Module
$106median
$20$440
02wide ±290%
Car Radio
$120median
$25$722
03wide ±174%
Front Seat
$211median
$61$795
04wide ±214%
Air Bag
$223median
$45$1,000
05wide ±120%
Drive Shaft
$191median
$60$520
06wide ±201%
Wheels
$200median
$47$850
07wide ±156%
Side Mirror
$186median
$41$620
08wide ±115%
Transmission
$1,975median
$544$5,087
09wide ±79%
Quarter Panel
$606median
$266$1,225
10wide ±146%
Center Console
$159median
$35$500
11wide ±132%
AC Condenser
$159median
$40$460
12wide ±265%
Fuel Pump
$118median
$25$650
Price comparisons
Compare GMC Canyon fender prices
Fendercompare
JeepWranglervsGMCCanyon
Wrangler$266
Canyon$359
$93 diff6,548 listings
FendercompareMercedesEClassvsGMCCanyon
Class$302
Canyon$359
$57 diff4,294 listings
FendercompareSubaruCrosstrekvsGMCCanyon
Crosstrek$230
Canyon$359
$129 diff3,913 listings
FendercompareMercedesGLEClassvsGMCCanyon
Class$450
Canyon$359
$91 diff3,872 listings
FendercompareJeepGladiatorvsGMCCanyon
Gladiator$266
Canyon$359
$93 diff3,846 listings
FendercompareNissanTitanvsGMCCanyon
Titan$347
Canyon$359
$12 diff3,666 listings
Compare fitments
What do similar vehicles charge for this part?
BMWwide ±75%
BMW X3
$400median
$125$728
BMWwide ±86%
BMW X5
$485median
$200$1,037
Chevywide ±144%
Chevy Equinox
$334median
$65$1,027
Chevywide ±94%
Chevy Malibu
$278median
$60$582
Chevywide ±124%
Chevy Silverado 1500
$440median
$150$1,243
Chevywide ±67%
Chevy Tahoe
$644median
$300$1,162
Chevywide ±73%
Chevy Traverse
$350median
$150$661
Dodgewide ±209%
Dodge Challenger
$240median
$40$1,042
Dodgewide ±126%
Dodge Charger
$247median
$76$700
Dodgewide ±106%
Dodge Durango
$230median
$75$561
GMCwide ±88%
GMC Sierra 1500
$504median
$160$1,050
GMCwide ±77%
GMC Yukon
$675median
$228$1,269
Common questions
GMC Canyon fender FAQ
How much is a used fender for a GMC Canyon?
The median asking price is $359 across 829 priced listings from 283 yards. 2023 is the cheapest model year we track, with a median of $250.
How much does it cost to replace a GMC Canyon fender?
Using a used part, a GMC Canyon fender replacement typically runs $550–$960 all-in: the median used fender for this model lists at $359, and independent-shop labor for fender replacement typically takes 2–4 hours at $95–$150/hr ($190–$600). The labor figure does not include paint if the panel isn't color-matched. Labor is a national part-level estimate, not a quote for your vehicle.
Which GMC Canyon model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which GMC Canyon fender years are interchangeable?
Salvage-yard interchange data links GMC Canyon fender fitments across 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026. Searching all 12 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.