Used Jeep Grand Cherokee ignition switch from a salvage yard

Vehicle-specific price guide

How much is a used Jeep Grand Cherokee ignition switch?

Asking prices from 131 salvage yards in 28 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 23, 2026
Strong coverage797 priced of 920 observed3 variantsMethodology v2.1 →

Part overview

About the Jeep Grand Cherokee ignition switch

What the ignition switch does, common failure signs, and prices across all vehicles: used ignition switch price guide →

Also known asKey SwitchIgnition Starter Switch
Price summary

A used Jeep Grand Cherokee ignition switch costs $30 to $340, with a median asking price of $100. Based on 797 priced salvage yard listings across the US, compatible across 2011–2025 (15 model years), updated Sep 23, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$99
Grade B (good)$100
Grade C (fair)$50

Jeep Grand Cherokee ignition switch price snapshot

USD
Low
$30
Average
$117
High
$340
920 listings observed · 797 priced1mo ago· How we price·

Report incorrect price

Reporting price for Jeep Grand Cherokee Ignition Switch

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$30–$340580 listings
Grade BStandard used$34–$340160 listings
Grade CVisible wear$50–$501 listings
Grade XUngraded$50–$25056 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $30–$340 overall range

Regional supply

Where the Jeep Grand Cherokee ignition switch is listed

We found priced Jeep Grand Cherokee ignition switch listings at 131 salvage yards across 28 states. California supplies the most, with 289 listings (35% of the total) from 13 yards. Location matters: yards in Michigan ask a median $78, while Illinois yards ask $219, 181% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California28913$100
Illinois15213$219+119%
Michigan598$78-22%
Florida498$99-1%
Indiana438$78-22%
Arizona337$78-22%
Wisconsin287$78-22%
Colorado273$78-22%

States with at least 10 priced listings. % is versus the $100 national median.

Replacement cost

What is the Jeep Grand Cherokee ignition switch replacement cost?

ESTIMATE
Used part
$100
Jeep Grand Cherokee median asking price
Labor
$95–$375
1–2.5 hours at $95–$150/hr
Estimated total
$195–$475
median used part + labor

Labor is a typical independent-shop range for ignition switch replacement, not a quote for your vehicle; it does not include key programming if the vehicle has an immobilizer system. The part price is the live median from the salvage-yard listings on this page. Full ignition switch replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Jeep Grand Cherokee Ignition Switch

$

Current avg: $117 — we suggest $99 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2022)

WL body (VIN G, H, Y, J or K, 6th digit)47 listingsInterchange 2021–2025$76$71 – $100
WK body (VIN E or F, 6th digit), (keyless ignition), w/o torque distribution43 listingsInterchange 2011–2019$100$100 – $250

Model-year comparison

What does a Jeep Grand Cherokee ignition switch cost by year?

$70$103$136$170$2032015201620172018201920202021202220232024
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Jeep Grand Cherokee ignition switch cost?

Asking prices for a used Jeep Grand Cherokee ignition switch are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 98% premium over grade-C stock, with grade-A medians at $99.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, WL body (VIN G, H, Y, J or K, 6th digit), lists at a $76 median, while WK body (VIN E or F, 6th digit), (keyless ignition), w/o torque distribution commands $100, a 32% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2019 units carry the lowest median at $78, while 2017 tops the table at $193. Parts from 2011–2022 are interchangeable, so if the 2019 fits your vehicle, it offers the best value across 12 compatible years.

Against comparable vehicles, the Jeep Grand Cherokee sits level with the Mercedes S Class ($100), level with the Hyundai Elantra ($100), and 1% above the Mercedes GLE Class ($99) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used ignition switch: what to check

  1. Inspect contact board for arc burning: Check multi-pin electrical harness plugs for brown heat discoloration caused by worn internal switch contacts.
  2. Test key cylinder detent feel: Turn the key through Accessory, Run, and Start positions to ensure crisp detents without key binding or slop.
  3. Verify immobilizer antenna halo inclusion: Confirm the plastic transponder receiver ring surrounds the key cylinder and has undamaged wiring terminals.
  4. Check mechanical steering lock bolt: Verify the spring-loaded column locking bolt extends and retracts smoothly when inserting and removing the key.
  5. Plan for key matching or re-keying: Ask if matching door keys are included, or budget for a lock technician to re-key the cylinder to your original key.

Keep browsing this vehicle

What other Jeep Grand Cherokee parts are priced?

Price comparisons

Compare Jeep Grand Cherokee ignition switch prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Jeep Grand Cherokee ignition switch FAQ

How much is a used ignition switch for a Jeep Grand Cherokee?

The median asking price is $100 across 797 priced listings from 131 yards. Grade-A units, the cleanest stock, have a median of $99. 2024 is the cheapest model year we track, with a median of $78.

How much does it cost to replace a Jeep Grand Cherokee ignition switch?

Using a used part, a Jeep Grand Cherokee ignition switch replacement typically runs $195–$475 all-in: the median used ignition switch for this model lists at $100, and independent-shop labor for ignition switch replacement typically takes 1–2.5 hours at $95–$150/hr ($95–$375). The labor figure does not include key programming if the vehicle has an immobilizer system. Labor is a national part-level estimate, not a quote for your vehicle.

Which Jeep Grand Cherokee model years does this price guide cover?

This guide currently has year-level pricing for 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Jeep Grand Cherokee ignition switch years are interchangeable?

Salvage-yard interchange data links Jeep Grand Cherokee ignition switch fitments across 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 15 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Jeep Grand Cherokee Ignition Switch Cost — From $30 to $340