Used Acura RDX intake manifold from a salvage yard

Vehicle-specific price guide

How much is a used Acura RDX intake manifold?

Asking prices from 120 salvage yards in 30 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 21, 2026
Strong coverage485 priced of 887 observed3 variantsMethodology v2.1 →

Part overview

About the Acura RDX intake manifold

What the intake manifold does, common failure signs, and prices across all vehicles: used intake manifold price guide →

Also known asInlet Manifold
Price summary

A used Acura RDX intake manifold costs $25 to $235, with a median asking price of $75. Based on 485 priced salvage yard listings across the US, compatible across 2007–2023 (17 model years), updated Oct 21, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$66
Grade B (good)$100
Grade C (fair)$50

Acura RDX intake manifold price snapshot

USD
Low
$25
Average
$91
High
$235
887 listings observed · 485 priced11d ago· How we price·

Report incorrect price

Reporting price for Acura RDX Intake Manifold

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$40–$225301 listings
Grade BStandard used$56–$23566 listings
Grade CVisible wear$48–$10019 listings
Grade XUngraded$25–$20099 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $25–$235 overall range

Regional supply

Where the Acura RDX intake manifold is listed

We found priced Acura RDX intake manifold listings at 120 salvage yards across 30 states. California supplies the most, with 241 listings (39% of the total) from 34 yards. Location matters: yards in Florida ask a median $50, while Pennsylvania yards ask $100, 100% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California24134$70-7%
Texas483$61-19%
Florida4615$50-33%
Arizona385$50-33%
Pennsylvania328$100+33%
New Mexico263$61-19%
Utah183$70-7%
New Jersey154$75

States with at least 10 priced listings. % is versus the $75 national median.

Replacement cost

What is the Acura RDX intake manifold replacement cost?

ESTIMATE
Used part
$75
Acura RDX median asking price
Labor
$190–$750
2–5 hours at $95–$150/hr
Estimated total
$265–$825
median used part + labor

Labor is a typical independent-shop range for intake manifold replacement, not a quote for your vehicle; it does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. The part price is the live median from the salvage-yard listings on this page. Full intake manifold replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Acura RDX Intake Manifold

$

Current avg: $91 — we suggest $77 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2018)

(3.5L), lower (injector base), LH (front)20 listingsInterchange 2007–2018$51$40 – $90
(3.5L), lower (injector base), RH (rear)18 listingsInterchange 2007–2018$65$35 – $90
(3.5L), upper6 listingsInterchange 2013–2018$175$100 – $225

Model-year comparison

What does a Acura RDX intake manifold cost by year?

$45$59$72$86$10020152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Acura RDX intake manifold cost?

Asking prices for a used Acura RDX intake manifold are unusually spread out: the top listing asks about 9 times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 32% premium over grade-C stock, with grade-A medians at $66.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, (3.5L), lower (injector base), LH (front), lists at a $51 median, while (3.5L), upper commands $175, a 243% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2016 units carry the lowest median at $50, while 2015 tops the table at $95. Parts from 2007–2018 are interchangeable, so if the 2016 fits your vehicle, it offers the best value across 12 compatible years.

Against comparable vehicles, the Acura RDX sits 59% below the Mercedes S Class ($181), 68% below the Ram 3500 ($235), and 40% below the Mercedes E Class ($126) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used intake manifold: what to check

  1. Inspect composite runners for heat cracks: Examine plastic manifolds for oil-softened walls, heat cracks, or snapped vacuum port nipples along the plenum.
  2. Verify variable runner flap operation: Move variable intake runner flap linkages and vacuum actuators by hand to ensure internal butterfly valves rotate freely.
  3. Check rubber gasket groove channels: Examine sealing channels around cylinder head intake ports to ensure plastic retaining walls are not chipped.
  4. Confirm sensor port and throttle flange fit: Match vacuum line nipples, manifold absolute pressure sensor mounts, and throttle body bolt dimensions.
  5. Install new molded rubber port gaskets: Replace all port seals and throttle body gaskets with fresh silicone seals to prevent lean engine vacuum leaks.

Keep browsing this vehicle

What other Acura RDX parts are priced?

Price comparisons

Compare Acura RDX intake manifold prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Acura RDX intake manifold FAQ

How much is a used intake manifold for a Acura RDX?

The median asking price is $75 across 485 priced listings from 120 yards. Grade-A units, the cleanest stock, have a median of $66. 2016 is the cheapest model year we track, with a median of $50.

How much does it cost to replace a Acura RDX intake manifold?

Using a used part, a Acura RDX intake manifold replacement typically runs $265–$825 all-in: the median used intake manifold for this model lists at $75, and independent-shop labor for intake manifold replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. Labor is a national part-level estimate, not a quote for your vehicle.

Which Acura RDX model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Acura RDX intake manifold years are interchangeable?

Salvage-yard interchange data links Acura RDX intake manifold fitments across 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023. Searching all 17 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Acura RDX Intake Manifold Cost — From $25 to $235