Ford Fusion master cylinder price snapshot
- Low
- $25
- Average
- $75
- High
- $250
Vehicle-specific price guide
How much is a used Ford Fusion master cylinder?
Asking prices from 136 salvage yards in 29 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 21, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Ford Fusion master cylinder
What the master cylinder does, common failure signs, and prices across all vehicles: used master cylinder price guide →
Also known asBrake Master Cylinder
Price summary
A used Ford Fusion master cylinder costs $25 to $250, with a median asking price of $51. Based on 902 priced salvage yard listings across the US, compatible across 2013–2020 (8 model years), updated Oct 21, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$51
Grade B (good)$60
Grade C (fair)$51
USD
Condition comparison
Price by part grade
Grade AClean / low wear$25–$193637 listings
Grade BStandard used$25–$250208 listings
Grade CVisible wear$43–$6014 listings
Grade XUngraded$25–$10043 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $25–$193 | 637 | |
| Grade BStandard used | $25–$250 | 208 | |
| Grade CVisible wear | $43–$60 | 14 | |
| Grade XUngraded | $25–$100 | 43 |
Median by grade
Grade price comparison
Grade A$51
Grade B$60
Grade C$51
Ungraded$50
Median asking price by seller-reported condition grade · $25–$250 overall range
Regional supply
Where the Ford Fusion master cylinder is listed
We found priced Ford Fusion master cylinder listings at 136 salvage yards across 29 states. Illinois supplies the most, with 448 listings (27% of the total) from 10 yards. Location matters: yards in Illinois ask a median $51, while Wisconsin yards ask $160, 214% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| Illinois | 448 | 10 | $51 |
| California | 276 | 27 | $100+96% |
| Texas | 194 | 16 | $68+33% |
| Arizona | 184 | 12 | $58+14% |
| Georgia | 96 | 7 | $99+94% |
| Kentucky | 76 | 10 | $105+106% |
| North Carolina | 54 | 4 | $51 |
| Wisconsin | 51 | 4 | $160+214% |
States with at least 10 priced listings. % is versus the $51 national median.
Replacement cost
What is the Ford Fusion master cylinder replacement cost?
- Used part
- $51
- Ford Fusion median asking price
- Labor
- $145–$450
- 1.5–3 hours at $95–$150/hr
- Estimated total
- $195–$500
- median used part + labor
Labor is a typical independent-shop range for master cylinder replacement, not a quote for your vehicle; it does not include brake fluid and full system bleed at all four wheels. The part price is the live median from the salvage-yard listings on this page. Full master cylinder replacement cost breakdown
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a Ford Fusion master cylinder cost by year?
Market analysis
How much does a used Ford Fusion master cylinder cost?
Asking prices for a used Ford Fusion master cylinder are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 1.5L, lists at a $51 median, while 2.0L, VIN U (8th digit, hybrid) commands $99, a 94% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2015 units carry the lowest median at $46, while 2018 tops the table at $99. Parts from 2013–2020 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 8 compatible years.
Against comparable vehicles, the Ford Fusion sits 80% below the Nissan Titan ($250), 22% below the Ford Mustang ($65), and 20% below the Honda Civic ($64) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used master cylinder: what to check
- Inspect rear piston seal for fluid leaks: Check the rear mounting flange for wet fluid leakage that damages power brake booster rubber diaphragms.
- Verify reservoir clarity and mounting grommets: Inspect the plastic fluid reservoir for sun-embrittled walls, cracks, or hardened rubber mounting grommets.
- Check brake line port thread types: Verify whether hydraulic output ports use metric bubble flares or inverted flare threads before connecting brake lines.
- Confirm fluid level sensor plug condition: Check the fluid level float switch connector for corrosion or broken locking tabs to avoid low-fluid dash warnings.
- Bench bleed before vehicle installation: Purge trapped air from internal piston chambers using a bench bleed kit before attaching vehicle brake lines.
Keep browsing this vehicle
What other Ford Fusion parts are priced?
01wide ±185%
Tail Light
$85median
$30$345
02wide ±228%
Grille
$161median
$30$765
03wide ±273%
Wheels
$139median
$30$790
04wide ±125%
Transmission
$1,624median
$532$4,596
05wide ±116%
Axle Shaft
$137median
$25$343
06wide ±193%
Side Mirror
$158median
$30$640
07wide ±160%
AC Compressor
$100median
$30$350
08wide ±218%
Alternator
$85median
$20$390
09wide ±117%
Fender
$200median
$75$541
10wide ±241%
Radiator
$110median
$20$550
11wide ±197%
Strut
$75median
$25$320
12wide ±141%
Headlight Assembly
$469median
$81$1,400
Price comparisons
Compare Ford Fusion master cylinder prices
Master Cylindercompare
NissanTitanvsFordFusion
Titan$250
Fusion$51
$199 diff3,201 listings
Master CylindercompareFordMustangvsFordFusion
Mustang$65
Fusion$51
$14 diff3,036 listings
Master CylindercompareHondaCivicvsFordFusion
Civic$64
Fusion$51
$13 diff2,758 listings
Master CylindercompareMercedesEClassvsFordFusion
Class$65
Fusion$51
$14 diff2,687 listings
Master CylindercompareHyundaiElantravsFordFusion
Elantra$99
Fusion$51
$48 diff2,668 listings
Master CylindercompareMercedesSClassvsFordFusion
Class$87
Fusion$51
$36 diff2,121 listings
Compare fitments
What do similar vehicles charge for this part?
Fordwide ±60%
Ford Bronco
$176median
$30$240
Fordwide ±154%
Ford Bronco Sport
$99median
$30$334
Fordwide ±152%
Ford Edge
$99median
$30$331
Fordwide ±126%
Ford Escape
$99median
$35$285
Fordwide ±141%
Ford Expedition
$99median
$25$305
Fordwide ±160%
Ford Explorer
$76median
$20$263
Fordwide ±205%
Ford F150
$100median
$25$434
Fordwide ±123%
Ford F250
$99median
$25$268
Fordwide ±234%
Ford Focus
$50median
$20$254
Fordwide ±202%
Ford Maverick
$76median
$25$332
Fordwide ±278%
Ford Mustang
$65median
$20$381
Fordwide ±135%
Ford Ranger
$99median
$30$297
Common questions
Ford Fusion master cylinder FAQ
How much is a used master cylinder for a Ford Fusion?
The median asking price is $51 across 902 priced listings from 136 yards. Grade-A units, the cleanest stock, have a median of $51. 2015 is the cheapest model year we track, with a median of $46.
How much does it cost to replace a Ford Fusion master cylinder?
Using a used part, a Ford Fusion master cylinder replacement typically runs $195–$500 all-in: the median used master cylinder for this model lists at $51, and independent-shop labor for master cylinder replacement typically takes 1.5–3 hours at $95–$150/hr ($145–$450). The labor figure does not include brake fluid and full system bleed at all four wheels. Labor is a national part-level estimate, not a quote for your vehicle.
Which Ford Fusion model years does this price guide cover?
This guide currently has year-level pricing for 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Ford Fusion master cylinder years are interchangeable?
Salvage-yard interchange data links Ford Fusion master cylinder fitments across 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020. Searching all 8 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.