Used Lexus NX300 master cylinder from a salvage yard

Vehicle-specific price guide

How much is a used Lexus NX300 master cylinder?

Asking prices from 52 salvage yards in 11 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 7, 2026
Strong coverage187 priced of 200 observed0 variantsMethodology v2.1 →

Part overview

About the Lexus NX300 master cylinder

What the master cylinder does, common failure signs, and prices across all vehicles: used master cylinder price guide →

Also known asBrake Master Cylinder
Price summary

A used Lexus NX300 master cylinder costs $45 to $331, with a median asking price of $99. Based on 187 priced salvage yard listings across the US, compatible across 2015–2021 (7 model years), updated Oct 7, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$99
Grade B (good)$122

Lexus NX300 master cylinder price snapshot

USD
Low
$45
Average
$110
High
$331
200 listings observed · 187 priced23d ago· How we price·

Report incorrect price

Reporting price for Lexus NX300 Master Cylinder

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$45–$331153 listings
Grade BStandard used$46–$26630 listings
Grade XUngraded$70–$1004 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $45–$331 overall range

Regional supply

Where the Lexus NX300 master cylinder is listed

We found priced Lexus NX300 master cylinder listings at 52 salvage yards across 11 states. California supplies the most, with 50 listings (27% of the total) from 14 yards. Location matters: yards in Arizona ask a median $51, while Indiana yards ask $158, 210% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California5014$70-29%
Illinois347$146+47%
Michigan2612$141+42%
Indiana206$158+60%
Arizona192$51-48%
Wisconsin146$100+1%
Nevada101$51-48%

States with at least 10 priced listings. % is versus the $99 national median.

Replacement cost

What is the Lexus NX300 master cylinder replacement cost?

ESTIMATE
Used part
$99
Lexus NX300 median asking price
Labor
$145–$450
1.5–3 hours at $95–$150/hr
Estimated total
$245–$550
median used part + labor

Labor is a typical independent-shop range for master cylinder replacement, not a quote for your vehicle; it does not include brake fluid and full system bleed at all four wheels. The part price is the live median from the salvage-yard listings on this page. Full master cylinder replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Lexus NX300 Master Cylinder

$

Current avg: $110 — we suggest $94 (15% below)

Condition grade (optional)

Model-year comparison

What does a Lexus NX300 master cylinder cost by year?

$46$72$99$125$1512018201920202021
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Lexus NX300 master cylinder cost?

Asking prices for a used Lexus NX300 master cylinder are unusually spread out: the top listing asks about 7 times what the cheapest does, so which unit you pick matters more than the median.

Model year matters too: 2019 units carry the lowest median at $51, while 2020 tops the table at $144. Parts from 2015–2021 are interchangeable, so if the 2019 fits your vehicle, it offers the best value across 7 compatible years.

Against comparable vehicles, the Lexus NX300 sits 52% above the Ford Mustang ($65), 55% above the Honda Civic ($64), and 52% above the Mercedes E Class ($65) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used master cylinder: what to check

  1. Inspect rear piston seal for fluid leaks: Check the rear mounting flange for wet fluid leakage that damages power brake booster rubber diaphragms.
  2. Verify reservoir clarity and mounting grommets: Inspect the plastic fluid reservoir for sun-embrittled walls, cracks, or hardened rubber mounting grommets.
  3. Check brake line port thread types: Verify whether hydraulic output ports use metric bubble flares or inverted flare threads before connecting brake lines.
  4. Confirm fluid level sensor plug condition: Check the fluid level float switch connector for corrosion or broken locking tabs to avoid low-fluid dash warnings.
  5. Bench bleed before vehicle installation: Purge trapped air from internal piston chambers using a bench bleed kit before attaching vehicle brake lines.

Keep browsing this vehicle

What other Lexus NX300 parts are priced?

Price comparisons

Compare Lexus NX300 master cylinder prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Lexus NX300 master cylinder FAQ

How much is a used master cylinder for a Lexus NX300?

The median asking price is $99 across 187 priced listings from 52 yards. Grade-A units, the cleanest stock, have a median of $99. 2021 is the cheapest model year we track, with a median of $51.

How much does it cost to replace a Lexus NX300 master cylinder?

Using a used part, a Lexus NX300 master cylinder replacement typically runs $245–$550 all-in: the median used master cylinder for this model lists at $99, and independent-shop labor for master cylinder replacement typically takes 1.5–3 hours at $95–$150/hr ($145–$450). The labor figure does not include brake fluid and full system bleed at all four wheels. Labor is a national part-level estimate, not a quote for your vehicle.

Which Lexus NX300 model years does this price guide cover?

This guide currently has year-level pricing for 2021, 2020, 2019, 2018. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Lexus NX300 master cylinder years are interchangeable?

Salvage-yard interchange data links Lexus NX300 master cylinder fitments across 2015, 2016, 2017, 2018, 2019, 2020, 2021. Searching all 7 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Lexus NX300 Master Cylinder Cost — From $45 to $331