Used Chevy Suburban water pump from a salvage yard

Vehicle-specific price guide

How much is a used Chevy Suburban water pump?

Asking prices from 70 salvage yards in 27 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 24, 2026
Strong coverage568 priced of 884 observed5 variantsMethodology v2.1 →

Part overview

About the Chevy Suburban water pump

What the water pump does, common failure signs, and prices across all vehicles: used water pump price guide →

Also known asCoolant PumpEngine Water Pump
Price summary

A used Chevy Suburban water pump costs $25 to $340, with a median asking price of $75. Based on 568 priced salvage yard listings across the US, compatible across 2014–2025 (12 model years), updated Sep 24, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$75
Grade B (good)$75
Grade C (fair)$56

Chevy Suburban water pump price snapshot

USD
Low
$25
Average
$104
High
$340
884 listings observed · 568 priced1mo ago· How we price·

Report incorrect price

Reporting price for Chevy Suburban Water Pump

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$25–$315326 listings
Grade BStandard used$51–$340174 listings
Grade CVisible wear$51–$563 listings
Grade XUngraded$30–$23565 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $25–$340 overall range

Regional supply

Where the Chevy Suburban water pump is listed

We found priced Chevy Suburban water pump listings at 70 salvage yards across 27 states. Washington supplies the most, with 197 listings (35% of the total) from 1 yard. Location matters: yards in Washington ask a median $56, while Florida yards ask $220, 293% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Washington1971$56-25%
California11610$75
South Carolina364$135+80%
Florida274$220+193%
Ohio214$192+156%
Kentucky182$109+45%
Wisconsin187$100+33%
Texas163$75

States with at least 10 priced listings. % is versus the $75 national median.

Replacement cost

What is the Chevy Suburban water pump replacement cost?

ESTIMATE
Used part
$75
Chevy Suburban median asking price
Labor
$190–$750
2–5 hours at $95–$150/hr
Estimated total
$265–$825
median used part + labor

Labor is a typical independent-shop range for water pump replacement, not a quote for your vehicle; it does not include coolant refill and system bleed; timing belt replacement recommended if belt-driven. The part price is the live median from the salvage-yard listings on this page. Full water pump replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Chevy Suburban Water Pump

$

Current avg: $104 — we suggest $88 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

5.3L, belt driven27 listingsInterchange 2019–2025$51$50 – $340
6.2L, belt driven24 listingsInterchange 2022–2024$125$75 – $315
5.3L, electric (below exhaust manifold)23 listingsInterchange 2021–2024$56$35 – $220
6.2L, electric (below exhaust manifold)23 listingsInterchange 2021–2024$56$35 – $220
3.0L7 listingsInterchange 2023–2025$199$39 – $212

Model-year comparison

What does a Chevy Suburban water pump cost by year?

$46$61$75$90$10520152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Chevy Suburban water pump cost?

Asking prices for a used Chevy Suburban water pump are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 34% premium over grade-C stock, with grade-A medians at $75.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 5.3L, belt driven, lists at a $51 median, while 3.0L commands $199, a 290% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2020 units carry the lowest median at $51, while 2016 tops the table at $100. Parts from 2014–2020 are interchangeable, so if the 2020 fits your vehicle, it offers the best value across 7 compatible years.

Against comparable vehicles, the Chevy Suburban sits 50% below the Mercedes S Class ($150), 53% below the Mercedes GLE Class ($158), and 48% below the Mercedes E Class ($144) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used water pump: what to check

  1. Inspect weep hole for coolant stain trails: Check the bottom housing weep hole for wet coolant leaks, green crust, or rust trails indicating shaft seal failure.
  2. Verify shaft bearing play and impeller rotation: Spin the pulley hub by hand to feel for gritty bearing movement, radial shaft wobble, or binding impellers.
  3. Check impeller blade material and condition: Inspect plastic or stamped metal impeller vanes for cavitation erosion, broken fins, or loose press-fit hubs.
  4. Confirm housing mounting flange flatness: Verify that aluminum mating flanges are free of deep gouges, corrosion pits, or cracked bolt holes.
  5. Install a new gasket and flush system coolant: Clean block mating surfaces thoroughly and refill with fresh manufacturer-approved coolant during installation.

Keep browsing this vehicle

What other Chevy Suburban parts are priced?

Price comparisons

Compare Chevy Suburban water pump prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Chevy Suburban water pump FAQ

How much is a used water pump for a Chevy Suburban?

The median asking price is $75 across 568 priced listings from 70 yards. Grade-A units, the cleanest stock, have a median of $75. 2020 is the cheapest model year we track, with a median of $51.

How much does it cost to replace a Chevy Suburban water pump?

Using a used part, a Chevy Suburban water pump replacement typically runs $265–$825 all-in: the median used water pump for this model lists at $75, and independent-shop labor for water pump replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include coolant refill and system bleed; timing belt replacement recommended if belt-driven. Labor is a national part-level estimate, not a quote for your vehicle.

Which Chevy Suburban model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Chevy Suburban water pump years are interchangeable?

Salvage-yard interchange data links Chevy Suburban water pump fitments across 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 12 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Chevy Suburban Water Pump Cost — From $25 to $340