GMC Yukon ABS module price snapshot
- Low
- $50
- Average
- $204
- High
- $494
Vehicle-specific price guide
How much is a used GMC Yukon ABS module?
Asking prices from 240 salvage yards in 37 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 21, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the GMC Yukon ABS module
What the ABS module does, common failure signs, and prices across all vehicles: used ABS module price guide →
Also known asABS PumpABS Control ModuleEBCMABS Unit
Price summary
A used GMC Yukon ABS module costs $50 to $494, with a median asking price of $184. Based on 817 priced salvage yard listings across the US, compatible across 2014–2026 (13 model years), updated Oct 21, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$173
Grade B (good)$195
Grade C (fair)$75
USD
Condition comparison
Price by part grade
Grade AClean / low wear$50–$480447 listings
Grade BStandard used$56–$494303 listings
Grade CVisible wear$75–$752 listings
Grade XUngraded$75–$40065 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $50–$480 | 447 | |
| Grade BStandard used | $56–$494 | 303 | |
| Grade CVisible wear | $75–$75 | 2 | |
| Grade XUngraded | $75–$400 | 65 |
Median by grade
Grade price comparison
Grade A$173
Grade B$195
Grade C$75
Ungraded$200
Median asking price by seller-reported condition grade · $50–$494 overall range
Regional supply
Where the GMC Yukon ABS module is listed
We found priced GMC Yukon ABS module listings at 240 salvage yards across 37 states. California supplies the most, with 190 listings (15% of the total) from 45 yards. Location matters: yards in Texas ask a median $120, while Florida yards ask $299, 149% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| California | 190 | 45 | $187+2% |
| Texas | 162 | 25 | $120-35% |
| Florida | 145 | 20 | $299+63% |
| Illinois | 131 | 12 | $137-26% |
| Arizona | 104 | 14 | $121-34% |
| Ohio | 75 | 13 | $120-35% |
| Georgia | 69 | 10 | $124-33% |
| South Carolina | 38 | 8 | $200+9% |
States with at least 10 priced listings. % is versus the $184 national median.
Replacement cost
What is the GMC Yukon ABS module replacement cost?
- Used part
- $184
- GMC Yukon median asking price
- Labor
- $95–$450
- 1–3 hours at $95–$150/hr
- Estimated total
- $280–$635
- median used part + labor
Labor is a typical independent-shop range for ABS module replacement, not a quote for your vehicle; it does not include brake fluid flush and module programming if required. The part price is the live median from the salvage-yard listings on this page. How we price
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a GMC Yukon ABS module cost by year?
202550 listingsFits 2 years$196$95 – $258202450 listingsFits 4 years$186$90 – $437202395 listingsFits 4 years$250$100 – $4122022100 listingsFits 3 years$315$100 – $494202177 listingsFits 3 years$319$100 – $4942020100 listingsFits 4 years$159$56 – $2432019100 listingsFits 4 years$109$50 – $3342018100 listingsFits 7 years$198$66 – $3502017150 listingsFits 7 years$166$66 – $405201643 listingsFits 3 years$184$78 – $207201550 listingsFits 6 years$137$99 – $175
Market analysis
How much does a used GMC Yukon ABS module cost?
Asking prices for a used GMC Yukon ABS module are unusually spread out: the top listing asks about 10 times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 131% premium over grade-C stock, with grade-A medians at $173.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, w/o integrated trailer brake control, lists at a $229 median, while integrated trailer brake control (opt JL1) commands $256, a 12% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2019 units carry the lowest median at $109, while 2021 tops the table at $319. Parts from 2017–2020 are interchangeable, so if the 2019 fits your vehicle, it offers the best value across 4 compatible years.
Against comparable vehicles, the GMC Yukon sits 23% above the Honda Civic ($150), 2% above the Honda CRV ($180), and 26% above the Nissan Rogue ($146) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used ABS module: what to check
- Verify option code compatibility: Exact matching of vehicle traction control, stability control, and wheel-speed sensor options is required because mismatched modules cannot be recoded.
- Inspect connector pins for liquid intrusion: Check for green copper oxidation, melted pin housings, or burnt traces inside the harness plug caused by leaking brake fluid.
- Confirm hydraulic block port sealing: Ensure all hydraulic line ports remained capped during storage to prevent internal solenoid valve corrosion and dirt contamination.
- Purchase pump and ECU together: Buying the combined hydraulic block and electronic control unit prevents internal seal damage caused by bench separation.
- Plan for bi-directional scan tool bleeding: Budget time for an automated scan tool system bleed and steering angle sensor calibration immediately after installation.
Keep browsing this vehicle
What other GMC Yukon parts are priced?
01wide ±197%
Wheels
$300median
$67$1,250
02wide ±162%
Side Mirror
$229median
$50$794
03wide ±262%
Transfer Case
$287median
$61$1,563
04wide ±78%
Transmission
$2,595median
$1,295$5,342
05wide ±231%
Strut
$265median
$50$1,272
06wide ±152%
Radiator
$233median
$70$779
07wide ±66%
Headlight Assembly
$750median
$282$1,268
08wide ±161%
Grille
$350median
$65$1,195
09wide ±106%
Alternator
$136median
$35$323
10wide ±120%
Starter
$113median
$35$306
11wide ±151%
Axle Shaft
$150median
$40$493
12wide ±124%
Tail Light
$308median
$59$822
Price comparisons
Compare GMC Yukon ABS module prices
ABS Modulecompare
HondaCRVvsGMCYukon
CRV$180
Yukon$184
$4 diff6,134 listings
ABS ModulecompareNissanRoguevsGMCYukon
Rogue$146
Yukon$184
$38 diff5,164 listings
ABS ModulecompareMercedesGLEClassvsGMCYukon
Class$320
Yukon$184
$136 diff4,685 listings
ABS ModulecompareToyotaRAV4vsGMCYukon
RAV4$184
Yukon$184
$0 diff4,373 listings
ABS ModulecompareHondaHR-VvsGMCYukon
HR-V$166
Yukon$184
$18 diff4,018 listings
ABS ModulecompareMitsubishiEclipseCrossvsGMCYukon
Cross$172
Yukon$184
$12 diff3,709 listings
Compare fitments
What do similar vehicles charge for this part?
Acurawide ±136%
Acura ILX
$196median
$60$595
Acurawide ±110%
Acura Integra
$173median
$74$454
Acurawide ±190%
Acura MDX
$185median
$47$749
Acurawide ±157%
Acura RDX
$169median
$45$575
Acurawide ±186%
Acura TLX
$192median
$34$750
Audiwide ±194%
Audi A4
$185median
$40$759
Audiwide ±203%
Audi A6
$241median
$50$1,029
Audiwide ±166%
Audi Q3
$146median
$40$525
GMCwide ±91%
GMC Acadia
$164median
$40$338
GMCwide ±113%
GMC Canyon
$157median
$40$395
GMCwide ±91%
GMC Sierra 1500
$201median
$85$450
GMCwide ±163%
GMC Terrain
$116median
$35$413
Common questions
GMC Yukon ABS module FAQ
How much is a used ABS module for a GMC Yukon?
The median asking price is $184 across 817 priced listings from 240 yards. Grade-A units, the cleanest stock, have a median of $173. 2019 is the cheapest model year we track, with a median of $109.
How much does it cost to replace a GMC Yukon ABS module?
Using a used part, a GMC Yukon ABS module replacement typically runs $280–$635 all-in: the median used ABS module for this model lists at $184, and independent-shop labor for ABS module replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). The labor figure does not include brake fluid flush and module programming if required. Labor is a national part-level estimate, not a quote for your vehicle.
Which GMC Yukon model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which GMC Yukon ABS module years are interchangeable?
Salvage-yard interchange data links GMC Yukon ABS module fitments across 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026. Searching all 13 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.