Used GMC Sierra 1500 ABS module from a salvage yard

Vehicle-specific price guide

How much is a used GMC Sierra 1500 ABS module?

Asking prices from 158 salvage yards in 24 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 18, 2026
Strong coverage681 priced of 827 observed3 variantsMethodology v2.1 →

Part overview

About the GMC Sierra 1500 ABS module

What the ABS module does, common failure signs, and prices across all vehicles: used ABS module price guide →

Also known asABS PumpABS Control ModuleEBCMABS Unit
Price summary

A used GMC Sierra 1500 ABS module costs $85 to $450, with a median asking price of $201. Based on 681 priced salvage yard listings across the US, compatible across 2014–2025 (12 model years), updated Sep 18, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$201
Grade B (good)$190
Grade C (fair)$86

GMC Sierra 1500 ABS module price snapshot

USD
Low
$85
Average
$203
High
$450
827 listings observed · 681 priced1mo ago· How we price·

Report incorrect price

Reporting price for GMC Sierra 1500 ABS Module

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$85–$419377 listings
Grade BStandard used$85–$430268 listings
Grade CVisible wear$86–$861 listings
Grade XUngraded$90–$45035 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $85–$450 overall range

Regional supply

Where the GMC Sierra 1500 ABS module is listed

We found priced GMC Sierra 1500 ABS module listings at 158 salvage yards across 24 states. Illinois supplies the most, with 244 listings (34% of the total) from 14 yards. Location matters: yards in Wisconsin ask a median $156, while Arizona yards ask $220, 41% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Illinois24414$186-7%
California17143$204+1%
Texas14730$201
Indiana255$163-19%
Colorado246$179-11%
Arizona237$220+9%
Michigan2313$159-21%
Wisconsin105$156-22%

States with at least 10 priced listings. % is versus the $201 national median.

Replacement cost

What is the GMC Sierra 1500 ABS module replacement cost?

ESTIMATE
Used part
$201
GMC Sierra 1500 median asking price
Labor
$95–$450
1–3 hours at $95–$150/hr
Estimated total
$295–$650
median used part + labor

Labor is a typical independent-shop range for ABS module replacement, not a quote for your vehicle; it does not include brake fluid flush and module programming if required. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for GMC Sierra 1500 ABS Module

$

Current avg: $203 — we suggest $173 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2022)

integrated trailer brake control (opt JL1), classic style (Limited)48 listingsInterchange 2019–2023$232$94 – $271
integrated trailer brake control (opt JL1), new style48 listingsInterchange 2022–2023$182$85 – $290
w/o integrated trailer brake control47 listingsInterchange 2020–2023$232$116 – $249

Model-year comparison

What does a GMC Sierra 1500 ABS module cost by year?

$144$171$199$226$25320152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used GMC Sierra 1500 ABS module cost?

Asking prices for a used GMC Sierra 1500 ABS module are unusually spread out: the top listing asks about 5 times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 134% premium over grade-C stock, with grade-A medians at $201.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, integrated trailer brake control (opt JL1), new style, lists at a $182 median, while w/o integrated trailer brake control commands $232, a 27% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2018 units carry the lowest median at $160, while 2023 tops the table at $241. Parts from 2017–2020 are interchangeable, so if the 2018 fits your vehicle, it offers the best value across 4 compatible years.

Against comparable vehicles, the GMC Sierra 1500 sits 34% above the Honda Civic ($150), 12% above the Honda CRV ($180), and 38% above the Nissan Rogue ($146) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used ABS module: what to check

  1. Verify option code compatibility: Exact matching of vehicle traction control, stability control, and wheel-speed sensor options is required because mismatched modules cannot be recoded.
  2. Inspect connector pins for liquid intrusion: Check for green copper oxidation, melted pin housings, or burnt traces inside the harness plug caused by leaking brake fluid.
  3. Confirm hydraulic block port sealing: Ensure all hydraulic line ports remained capped during storage to prevent internal solenoid valve corrosion and dirt contamination.
  4. Purchase pump and ECU together: Buying the combined hydraulic block and electronic control unit prevents internal seal damage caused by bench separation.
  5. Plan for bi-directional scan tool bleeding: Budget time for an automated scan tool system bleed and steering angle sensor calibration immediately after installation.

Keep browsing this vehicle

What other GMC Sierra 1500 parts are priced?

Price comparisons

Compare GMC Sierra 1500 ABS module prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

GMC Sierra 1500 ABS module FAQ

How much is a used ABS module for a GMC Sierra 1500?

The median asking price is $201 across 681 priced listings from 158 yards. Grade-A units, the cleanest stock, have a median of $201. 2018 is the cheapest model year we track, with a median of $160.

How much does it cost to replace a GMC Sierra 1500 ABS module?

Using a used part, a GMC Sierra 1500 ABS module replacement typically runs $295–$650 all-in: the median used ABS module for this model lists at $201, and independent-shop labor for ABS module replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). The labor figure does not include brake fluid flush and module programming if required. Labor is a national part-level estimate, not a quote for your vehicle.

Which GMC Sierra 1500 model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which GMC Sierra 1500 ABS module years are interchangeable?

Salvage-yard interchange data links GMC Sierra 1500 ABS module fitments across 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 12 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used GMC Sierra 1500 ABS Module Cost — From $85 to $450