Used Mitsubishi Outlander ABS module from a salvage yard

Vehicle-specific price guide

How much is a used Mitsubishi Outlander ABS module?

Asking prices from 274 salvage yards in 40 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 17, 2026
Strong coverage843 priced of 978 observed3 variantsMethodology v2.1 →

Part overview

About the Mitsubishi Outlander ABS module

What the ABS module does, common failure signs, and prices across all vehicles: used ABS module price guide →

Also known asABS PumpABS Control ModuleEBCMABS Unit
Price summary

A used Mitsubishi Outlander ABS module costs $39 to $466, with a median asking price of $135. Based on 843 priced salvage yard listings across the US, compatible across 2014–2025 (12 model years), updated Oct 17, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$146
Grade B (good)$137
Grade C (fair)$99

Mitsubishi Outlander ABS module price snapshot

USD
Low
$39
Average
$158
High
$466
978 listings observed · 843 priced12d ago· How we price·

Report incorrect price

Reporting price for Mitsubishi Outlander ABS Module

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$39–$466502 listings
Grade BStandard used$55–$445275 listings
Grade CVisible wear$66–$10512 listings
Grade XUngraded$45–$34554 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $39–$466 overall range

Regional supply

Where the Mitsubishi Outlander ABS module is listed

We found priced Mitsubishi Outlander ABS module listings at 274 salvage yards across 40 states. Florida supplies the most, with 166 listings (20% of the total) from 40 yards. Location matters: yards in California ask a median $100, while Michigan yards ask $161, 61% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Florida16640$125-7%
Texas11032$116-14%
California7828$100-26%
Michigan5826$161+19%
Colorado468$135
Illinois3916$146+8%
Nebraska306$155+15%
Indiana2713$100-26%

States with at least 10 priced listings. % is versus the $135 national median.

Replacement cost

What is the Mitsubishi Outlander ABS module replacement cost?

ESTIMATE
Used part
$135
Mitsubishi Outlander median asking price
Labor
$95–$450
1–3 hours at $95–$150/hr
Estimated total
$230–$585
median used part + labor

Labor is a typical independent-shop range for ABS module replacement, not a quote for your vehicle; it does not include brake fluid flush and module programming if required. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Mitsubishi Outlander ABS Module

$

Current avg: $158 — we suggest $134 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

gasoline, adaptive cruise42 listingsInterchange 2022–2025$146$95 – $410
gasoline, w/o adaptive cruise36 listingsInterchange 2022–2025$146$75 – $380
plug-in hybrid (PHEV)21 listingsInterchange 2023–2025$310$124 – $466

Model-year comparison

What does a Mitsubishi Outlander ABS module cost by year?

$89$116$142$169$19520152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Mitsubishi Outlander ABS module cost?

Asking prices for a used Mitsubishi Outlander ABS module are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 47% premium over grade-C stock, with grade-A medians at $146.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, gasoline, adaptive cruise, lists at a $146 median, while plug-in hybrid (PHEV) commands $310, a 112% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2017 units carry the lowest median at $99, while 2023 tops the table at $186. Parts from 2017–2018 are interchangeable, so if the 2017 fits your vehicle, it offers the best value across 2 compatible years.

Against comparable vehicles, the Mitsubishi Outlander sits 10% below the Honda Civic ($150), 25% below the Honda CRV ($180), and 8% below the Nissan Rogue ($146) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used ABS module: what to check

  1. Verify option code compatibility: Exact matching of vehicle traction control, stability control, and wheel-speed sensor options is required because mismatched modules cannot be recoded.
  2. Inspect connector pins for liquid intrusion: Check for green copper oxidation, melted pin housings, or burnt traces inside the harness plug caused by leaking brake fluid.
  3. Confirm hydraulic block port sealing: Ensure all hydraulic line ports remained capped during storage to prevent internal solenoid valve corrosion and dirt contamination.
  4. Purchase pump and ECU together: Buying the combined hydraulic block and electronic control unit prevents internal seal damage caused by bench separation.
  5. Plan for bi-directional scan tool bleeding: Budget time for an automated scan tool system bleed and steering angle sensor calibration immediately after installation.

Keep browsing this vehicle

What other Mitsubishi Outlander parts are priced?

Price comparisons

Compare Mitsubishi Outlander ABS module prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Mitsubishi Outlander ABS module FAQ

How much is a used ABS module for a Mitsubishi Outlander?

The median asking price is $135 across 843 priced listings from 274 yards. Grade-A units, the cleanest stock, have a median of $146. 2017 is the cheapest model year we track, with a median of $99.

How much does it cost to replace a Mitsubishi Outlander ABS module?

Using a used part, a Mitsubishi Outlander ABS module replacement typically runs $230–$585 all-in: the median used ABS module for this model lists at $135, and independent-shop labor for ABS module replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). The labor figure does not include brake fluid flush and module programming if required. Labor is a national part-level estimate, not a quote for your vehicle.

Which Mitsubishi Outlander model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Mitsubishi Outlander ABS module years are interchangeable?

Salvage-yard interchange data links Mitsubishi Outlander ABS module fitments across 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 12 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Mitsubishi Outlander ABS Module Cost — From $39 to $466