Dodge Challenger axle shaft price snapshot
- Low
- $35
- Average
- $213
- High
- $937
Vehicle-specific price guide
How much is a used Dodge Challenger axle shaft?
Asking prices from 513 salvage yards in 44 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 20, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Dodge Challenger axle shaft
What the axle shaft does, common failure signs, and prices across all vehicles: used axle shaft price guide →
Also known asCV AxleCV ShaftDrive AxleHalf ShaftAxle AssemblyCovers front CV axles and rear axle shafts.
Price summary
A used Dodge Challenger axle shaft costs $35 to $937, with a median asking price of $190. Based on 4,672 priced salvage yard listings across the US, compatible across 2005–2023 (19 model years), updated Oct 20, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$195
Grade B (good)$162
Grade C (fair)$75
USD
Condition comparison
Price by part grade
Grade AClean / low wear$35–$9373,745 listings
Grade BStandard used$35–$535585 listings
Grade CVisible wear$45–$19232 listings
Grade XUngraded$35–$400310 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $35–$937 | 3,745 | |
| Grade BStandard used | $35–$535 | 585 | |
| Grade CVisible wear | $45–$192 | 32 | |
| Grade XUngraded | $35–$400 | 310 |
Median by grade
Grade price comparison
Grade A$195
Grade B$162
Grade C$75
Ungraded$120
Median asking price by seller-reported condition grade · $35–$937 overall range
Regional supply
Where the Dodge Challenger axle shaft is listed
We found priced Dodge Challenger axle shaft listings at 513 salvage yards across 44 states. Florida supplies the most, with 671 listings (11% of the total) from 39 yards. Location matters: yards in California ask a median $100, while Florida yards ask $349, 249% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| Florida | 671 | 39 | $349+84% |
| California | 662 | 43 | $100-47% |
| Texas | 626 | 29 | $178-6% |
| Arizona | 532 | 17 | $165-13% |
| Illinois | 532 | 27 | $146-23% |
| Michigan | 380 | 39 | $224+18% |
| Indiana | 328 | 22 | $182-4% |
| Georgia | 266 | 20 | $240+26% |
States with at least 10 priced listings. % is versus the $190 national median.
Replacement cost
What is the Dodge Challenger axle shaft replacement cost?
- Used part
- $190
- Dodge Challenger median asking price
- Labor
- $95–$375
- 1–2.5 hours at $95–$150/hr
- Estimated total
- $285–$565
- median used part + labor
Labor is a typical independent-shop range for axle shaft replacement, not a quote for your vehicle. The part price is the live median from the salvage-yard listings on this page. How we price
Sources
- Labor time estimates: Part Price Guide labor database
rear axle, 5.7L (VIN T, 8th digit), engine ID EZH, w/o opt DSK43 listingsInterchange 2015–2021$75$39 – $285
rear axle, 5.7L (VIN T, 8th digit), engine ID EZH, opt DSK (8HP70 transmission)38 listingsInterchange 2015–2023$225$100 – $480
Model-year comparison
What does a Dodge Challenger axle shaft cost by year?
2023742 listingsFits 19 years$166$35 – $6362022742 listingsFits 14 years$238$46 – $9372021800 listingsFits 19 years$217$41 – $6402020886 listingsFits 19 years$199$41 – $6362019878 listingsFits 19 years$160$35 – $6362018743 listingsFits 18 years$127$35 – $6362017650 listingsFits 19 years$162$45 – $3512016450 listingsFits 9 years$190$55 – $8122015450 listingsFits 9 years$190$55 – $812
Market analysis
How much does a used Dodge Challenger axle shaft cost?
Asking prices for a used Dodge Challenger axle shaft are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 160% premium over grade-C stock, with grade-A medians at $195.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, front axle, inner, (LH), (jackshaft), lists at a $65 median, while rear axle, 6.4L (VIN J, 8th digit), opt CXD, RH commands $487, a 649% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2018 units carry the lowest median at $127, while 2022 tops the table at $238. Parts from 2006–2023 are interchangeable, so if the 2018 fits your vehicle, it offers the best value across 18 compatible years.
Against comparable vehicles, the Dodge Challenger sits 34% below the Mercedes GLE Class ($287), 5% below the Mercedes C Class ($201), and 9% below the Mercedes E Class ($209) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used axle shaft: what to check
- Inspect CV boots for cracks. A torn boot means the joint has likely ingested grit.
- Confirm ABS ring compatibility with your sensor setup.
- Left and right shafts usually differ in length, so verify the side.
- Spin the joints through full articulation and listen for clicking.
Keep browsing this vehicle
What other Dodge Challenger parts are priced?
01wide ±230%
Wheels
$279median
$51$1,335
02wide ±200%
Strut
$165median
$30$690
03wide ±111%
Headlight Assembly
$736median
$170$1,800
04wide ±288%
Transmission
$1,798median
$303$10,666
05wide ±290%
Engine
$3,045median
$610$18,250
06wide ±215%
Starter
$85median
$25$390
07wide ±132%
Side Mirror
$150median
$35$431
08wide ±145%
Steering Rack
$650median
$183$2,074
09wide ±237%
Grille
$150median
$25$737
10wide ±188%
Alternator
$85median
$30$350
11wide ±342%
Radiator
$125median
$44$900
12wide ±74%
Hood
$873median
$373$1,665
Price comparisons
Compare Dodge Challenger axle shaft prices
Axle Shaftcompare
MercedesGLEClassvsDodgeChallenger
Class$287
Challenger$190
$97 diff15,463 listings
Axle ShaftcompareMercedesCClassvsDodgeChallenger
Class$201
Challenger$190
$11 diff14,184 listings
Axle ShaftcompareMercedesEClassvsDodgeChallenger
Class$209
Challenger$190
$19 diff13,507 listings
Axle ShaftcompareMercedesSClassvsDodgeChallenger
Class$278
Challenger$190
$88 diff11,742 listings
Axle ShaftcompareHondaCivicvsDodgeChallenger
Civic$125
Challenger$190
$65 diff10,954 listings
Axle ShaftcompareMercedesGLCClassvsDodgeChallenger
Class$203
Challenger$190
$13 diff10,467 listings
Compare fitments
What do similar vehicles charge for this part?
BMWwide ±278%
BMW X3
$200median
$34$1,144
BMWwide ±174%
BMW X5
$226median
$40$825
Chevywide ±168%
Chevy Equinox
$136median
$35$493
Chevywide ±193%
Chevy Malibu
$100median
$30$415
Chevywide ±132%
Chevy Silverado 1500
$160median
$45$468
Chevywide ±143%
Chevy Tahoe
$155median
$50$493
Chevywide ±154%
Chevy Traverse
$137median
$40$462
Dodgewide ±252%
Dodge Charger
$155median
$30$812
Dodgewide ±230%
Dodge Durango
$126median
$30$609
Fordwide ±162%
Ford Edge
$120median
$35$423
Fordwide ±158%
Ford Escape
$126median
$25$423
Fordwide ±200%
Ford Explorer
$101median
$20$423
Common questions
Dodge Challenger axle shaft FAQ
How much is a used axle shaft for a Dodge Challenger?
The median asking price is $190 across 4,672 priced listings from 513 yards. Grade-A units, the cleanest stock, have a median of $195. 2018 is the cheapest model year we track, with a median of $127.
How much does it cost to replace a Dodge Challenger axle shaft?
Using a used part, a Dodge Challenger axle shaft replacement typically runs $285–$565 all-in: the median used axle shaft for this model lists at $190, and independent-shop labor for axle shaft replacement typically takes 1–2.5 hours at $95–$150/hr ($95–$375). Labor is a national part-level estimate, not a quote for your vehicle.
Which Dodge Challenger model years does this price guide cover?
This guide currently has year-level pricing for 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Dodge Challenger axle shaft years are interchangeable?
Salvage-yard interchange data links Dodge Challenger axle shaft fitments across 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023. Searching all 19 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.