Dodge Charger axle shaft price snapshot
- Low
- $30
- Average
- $188
- High
- $812
Vehicle-specific price guide
How much is a used Dodge Charger axle shaft?
Asking prices from 642 salvage yards in 43 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 24, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Dodge Charger axle shaft
What the axle shaft does, common failure signs, and prices across all vehicles: used axle shaft price guide →
Also known asCV AxleCV ShaftDrive AxleHalf ShaftAxle AssemblyCovers front CV axles and rear axle shafts.
Price summary
A used Dodge Charger axle shaft costs $30 to $812, with a median asking price of $155. Based on 4,294 priced salvage yard listings across the US, compatible across 2005–2025 (21 model years), updated Oct 24, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$175
Grade B (good)$125
Grade C (fair)$70
USD
Condition comparison
Price by part grade
Grade AClean / low wear$30–$8123,170 listings
Grade BStandard used$30–$535883 listings
Grade CVisible wear$45–$19236 listings
Grade XUngraded$35–$400205 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $30–$812 | 3,170 | |
| Grade BStandard used | $30–$535 | 883 | |
| Grade CVisible wear | $45–$192 | 36 | |
| Grade XUngraded | $35–$400 | 205 |
Median by grade
Grade price comparison
Grade A$175
Grade B$125
Grade C$70
Ungraded$100
Median asking price by seller-reported condition grade · $30–$812 overall range
Regional supply
Where the Dodge Charger axle shaft is listed
We found priced Dodge Charger axle shaft listings at 642 salvage yards across 43 states. Florida supplies the most, with 836 listings (11% of the total) from 45 yards. Location matters: yards in California ask a median $75, while Michigan yards ask $200, 167% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| Florida | 836 | 45 | $199+28% |
| Texas | 759 | 36 | $132-15% |
| Illinois | 635 | 31 | $137-12% |
| Arizona | 580 | 19 | $84-46% |
| California | 519 | 44 | $75-52% |
| Georgia | 411 | 20 | $106-32% |
| Michigan | 391 | 39 | $200+29% |
| Indiana | 347 | 26 | $126-19% |
States with at least 10 priced listings. % is versus the $155 national median.
Replacement cost
What is the Dodge Charger axle shaft replacement cost?
- Used part
- $155
- Dodge Charger median asking price
- Labor
- $95–$375
- 1–2.5 hours at $95–$150/hr
- Estimated total
- $250–$530
- median used part + labor
Labor is a typical independent-shop range for axle shaft replacement, not a quote for your vehicle. The part price is the live median from the salvage-yard listings on this page. How we price
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a Dodge Charger axle shaft cost by year?
202514 listings$295$178 – $42920244 listingsNo priced listings yet2023982 listingsFits 19 years$155$30 – $6362022776 listingsFits 19 years$127$30 – $6362021750 listingsFits 19 years$175$34 – $6402020700 listingsFits 19 years$153$41 – $4232019700 listingsFits 19 years$145$34 – $4932018700 listingsFits 14 years$136$50 – $8122017265 listingsFits 17 years$88$40 – $4802016650 listingsFits 19 years$190$41 – $8122015439 listingsFits 12 years$190$45 – $445
Market analysis
How much does a used Dodge Charger axle shaft cost?
Asking prices for a used Dodge Charger axle shaft are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 150% premium over grade-C stock, with grade-A medians at $175.
Model year matters too: 2017 units carry the lowest median at $88, while 2025 tops the table at $295. Parts from 2007–2023 are interchangeable, so if the 2017 fits your vehicle, it offers the best value across 17 compatible years.
Against comparable vehicles, the Dodge Charger sits 46% below the Mercedes GLE Class ($287), 23% below the Mercedes C Class ($201), and 26% below the Mercedes E Class ($209) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used axle shaft: what to check
- Inspect CV boots for cracks. A torn boot means the joint has likely ingested grit.
- Confirm ABS ring compatibility with your sensor setup.
- Left and right shafts usually differ in length, so verify the side.
- Spin the joints through full articulation and listen for clicking.
Keep browsing this vehicle
What other Dodge Charger parts are priced?
01wide ±275%
Wheels
$220median
$39$1,250
02wide ±230%
Grille
$93median
$17$444
03wide ±266%
Side Mirror
$125median
$30$694
04wide ±290%
Strut
$100median
$20$600
05wide ±120%
Steering Rack
$545median
$181$1,485
06wide ±218%
Alternator
$85median
$25$395
07wide ±182%
Headlight Assembly
$403median
$76$1,540
08wide ±304%
Transmission
$750median
$147$4,700
09wide ±287%
Engine
$2,758median
$795$16,600
10wide ±243%
Starter
$75median
$25$390
11wide ±176%
Tail Light
$200median
$50$753
12wide ±339%
Radiator
$120median
$44$857
Price comparisons
Compare Dodge Charger axle shaft prices
Axle Shaftcompare
MercedesGLEClassvsDodgeCharger
Class$287
Charger$155
$132 diff15,085 listings
Axle ShaftcompareMercedesCClassvsDodgeCharger
Class$201
Charger$155
$46 diff13,806 listings
Axle ShaftcompareMercedesEClassvsDodgeCharger
Class$209
Charger$155
$54 diff13,129 listings
Axle ShaftcompareMercedesSClassvsDodgeCharger
Class$278
Charger$155
$123 diff11,364 listings
Axle ShaftcompareHondaCivicvsDodgeCharger
Civic$125
Charger$155
$30 diff10,544 listings
Axle ShaftcompareMercedesGLCClassvsDodgeCharger
Class$203
Charger$155
$48 diff10,089 listings
Compare fitments
What do similar vehicles charge for this part?
BMWwide ±272%
BMW X3
$204median
$34$1,144
BMWwide ±174%
BMW X5
$226median
$40$825
Chevywide ±168%
Chevy Equinox
$136median
$35$493
Chevywide ±193%
Chevy Malibu
$100median
$30$415
Chevywide ±132%
Chevy Silverado 1500
$160median
$45$468
Chevywide ±143%
Chevy Tahoe
$155median
$50$493
Chevywide ±154%
Chevy Traverse
$137median
$40$462
Dodgewide ±237%
Dodge Challenger
$190median
$35$937
Dodgewide ±230%
Dodge Durango
$126median
$30$609
Fordwide ±159%
Ford Edge
$115median
$35$400
Fordwide ±158%
Ford Escape
$126median
$25$423
Fordwide ±200%
Ford Explorer
$101median
$20$423
Common questions
Dodge Charger axle shaft FAQ
How much is a used axle shaft for a Dodge Charger?
The median asking price is $155 across 4,294 priced listings from 642 yards. Grade-A units, the cleanest stock, have a median of $175. 2017 is the cheapest model year we track, with a median of $88.
How much does it cost to replace a Dodge Charger axle shaft?
Using a used part, a Dodge Charger axle shaft replacement typically runs $250–$530 all-in: the median used axle shaft for this model lists at $155, and independent-shop labor for axle shaft replacement typically takes 1–2.5 hours at $95–$150/hr ($95–$375). Labor is a national part-level estimate, not a quote for your vehicle.
Which Dodge Charger model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Dodge Charger axle shaft years are interchangeable?
Salvage-yard interchange data links Dodge Charger axle shaft fitments across 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 21 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.