Used Subaru WRX intake manifold from a salvage yard

Vehicle-specific price guide

How much is a used Subaru WRX intake manifold?

Asking prices from 170 salvage yards in 36 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 29, 2026
Strong coverage1,538 priced of 2,014 observed8 variantsMethodology v2.1 →

Part overview

About the Subaru WRX intake manifold

What the intake manifold does, common failure signs, and prices across all vehicles: used intake manifold price guide →

Also known asInlet Manifold
Price summary

A used Subaru WRX intake manifold costs $25 to $470, with a median asking price of $125. Based on 1,538 priced salvage yard listings across the US, compatible across 2014–2024 (11 model years), updated Oct 29, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$136
Grade B (good)$126
Grade C (fair)$81

Subaru WRX intake manifold price snapshot

USD
Low
$25
Average
$143
High
$470
2,014 listings observed · 1,538 pricedUpdated 15h ago· How we price·

Report incorrect price

Reporting price for Subaru WRX Intake Manifold

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$25–$4701,214 listings
Grade BStandard used$50–$40882 listings
Grade CVisible wear$68–$8212 listings
Grade XUngraded$25–$450230 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $25–$470 overall range

Regional supply

Where the Subaru WRX intake manifold is listed

We found priced Subaru WRX intake manifold listings at 170 salvage yards across 36 states. California supplies the most, with 656 listings (21% of the total) from 24 yards. Location matters: yards in California ask a median $75, while Michigan yards ask $210, 180% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California65624$75-40%
Washington1923$81-35%
New York1788$97-22%
Massachusetts1747$75-40%
Michigan1169$210+68%
Ohio1125$161+29%
Texas1025$101-19%
Connecticut985$100-20%

States with at least 10 priced listings. % is versus the $125 national median.

Replacement cost

What is the Subaru WRX intake manifold replacement cost?

ESTIMATE
Used part
$125
Subaru WRX median asking price
Labor
$190–$750
2–5 hours at $95–$150/hr
Estimated total
$315–$875
median used part + labor

Labor is a typical independent-shop range for intake manifold replacement, not a quote for your vehicle; it does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. The part price is the live median from the salvage-yard listings on this page. Full intake manifold replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Subaru WRX Intake Manifold

$

Current avg: $143 — we suggest $122 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2021)

2.0L, upper45 listingsInterchange 2014–2021$161$65 – $450
2.0L, lower, LH43 listingsInterchange 2014–2019$108$25 – $235
2.0L, lower, RH42 listingsInterchange 2014–2021$88$25 – $186
2.5L, upper39 listingsInterchange 2015–2020$149$59 – $470
2.0L, middle (with motor), LH33 listingsInterchange 2014–2020$99$61 – $218
2.0L, middle (with motor), RH30 listingsInterchange 2014–2019$99$61 – $218
2.5L, lower (with motor), LH7 listingsInterchange 2015–2021$165$125 – $200
2.5L, lower (with motor), RH5 listingsInterchange 2015–2019$175$125 – $200

Model-year comparison

What does a Subaru WRX intake manifold cost by year?

$110$132$155$177$20020152016201720182019202120222024
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Subaru WRX intake manifold cost?

Asking prices for a used Subaru WRX intake manifold are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 68% premium over grade-C stock, with grade-A medians at $136.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 2.0L, lower, RH, lists at a $88 median, while 2.5L, lower (with motor), RH commands $175, a 99% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2016 units carry the lowest median at $122, while 2022 tops the table at $190. Parts from 2014–2021 are interchangeable, so if the 2016 fits your vehicle, it offers the best value across 8 compatible years.

Against comparable vehicles, the Subaru WRX sits 31% below the Mercedes S Class ($181), 47% below the Ram 3500 ($235), and 1% below the Mercedes E Class ($126) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used intake manifold: what to check

  1. Inspect composite runners for heat cracks: Examine plastic manifolds for oil-softened walls, heat cracks, or snapped vacuum port nipples along the plenum.
  2. Verify variable runner flap operation: Move variable intake runner flap linkages and vacuum actuators by hand to ensure internal butterfly valves rotate freely.
  3. Check rubber gasket groove channels: Examine sealing channels around cylinder head intake ports to ensure plastic retaining walls are not chipped.
  4. Confirm sensor port and throttle flange fit: Match vacuum line nipples, manifold absolute pressure sensor mounts, and throttle body bolt dimensions.
  5. Install new molded rubber port gaskets: Replace all port seals and throttle body gaskets with fresh silicone seals to prevent lean engine vacuum leaks.

Keep browsing this vehicle

What other Subaru WRX parts are priced?

Price comparisons

Compare Subaru WRX intake manifold prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Subaru WRX intake manifold FAQ

How much is a used intake manifold for a Subaru WRX?

The median asking price is $125 across 1,538 priced listings from 170 yards. Grade-A units, the cleanest stock, have a median of $136. 2019 is the cheapest model year we track, with a median of $122.

How much does it cost to replace a Subaru WRX intake manifold?

Using a used part, a Subaru WRX intake manifold replacement typically runs $315–$875 all-in: the median used intake manifold for this model lists at $125, and independent-shop labor for intake manifold replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. Labor is a national part-level estimate, not a quote for your vehicle.

Which Subaru WRX model years does this price guide cover?

This guide currently has year-level pricing for 2024, 2022, 2021, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Subaru WRX intake manifold years are interchangeable?

Salvage-yard interchange data links Subaru WRX intake manifold fitments across 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024. Searching all 11 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Subaru WRX Intake Manifold Cost — From $25 to $470