Chrysler 300 rear bumper price snapshot
- Low
- $74
- Average
- $306
- High
- $600
Vehicle-specific price guide
How much is a used Chrysler 300 rear bumper?
Asking prices from 48 salvage yards in 22 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 29, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Chrysler 300 rear bumper
What the rear bumper does, common failure signs, and prices across all vehicles: used rear bumper price guide →
Also known asRear Bumper Cover
Price summary
A used Chrysler 300 rear bumper costs $74 to $600, with a median asking price of $299. Based on 306 priced salvage yard listings across the US, compatible across 2015–2025 (11 model years), updated Oct 29, 2026. Prices exclude shipping, core charges, and installation.
USD
Regional supply
Where the Chrysler 300 rear bumper is listed
We found priced Chrysler 300 rear bumper listings at 48 salvage yards across 22 states. California supplies the most, with 72 listings (17% of the total) from 8 yards. Location matters: yards in Texas ask a median $100, while Nebraska yards ask $456, 356% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| California | 72 | 8 | $399+33% |
| Michigan | 48 | 4 | $187-37% |
| Minnesota | 36 | 4 | $290-3% |
| Virginia | 36 | 1 | $200-33% |
| Texas | 30 | 3 | $100-67% |
| Florida | 24 | 3 | $304+2% |
| New York | 18 | 2 | $299 |
| Nebraska | 12 | 2 | $456+53% |
States with at least 10 priced listings. % is versus the $299 national median.
Replacement cost
What is the Chrysler 300 rear bumper replacement cost?
- Used part
- $299
- Chrysler 300 median asking price
- Labor
- $145–$450
- 1.5–3 hours at $95–$150/hr
- Estimated total
- $445–$750
- median used part + labor
Labor is a typical independent-shop range for rear bumper replacement, not a quote for your vehicle; it does not include paint and blending if the cover isn't color-matched, and sensor recalibration on park-assist trims. The part price is the live median from the salvage-yard listings on this page. How we price
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a Chrysler 300 rear bumper cost by year?
20252 listingsNo priced listings yet20242 listingsNo priced listings yet202296 listingsFits 9 years$299$74 – $600202196 listingsFits 9 years$298$74 – $600202096 listingsFits 9 years$299$74 – $600201996 listingsFits 9 years$298$74 – $600201896 listingsFits 9 years$299$74 – $600201796 listingsFits 9 years$297$74 – $600
Market analysis
How much does a used Chrysler 300 rear bumper cost?
Asking prices for a used Chrysler 300 rear bumper are unusually spread out: the top listing asks about 8 times what the cheapest does, so which unit you pick matters more than the median.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, w/o park assist, lists at a $249 median, while park assist commands $374, a 50% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2017 units carry the lowest median at $297, while 2018 tops the table at $299. Parts from 2015–2023 are interchangeable, so if the 2017 fits your vehicle, it offers the best value across 9 compatible years.
Against comparable vehicles, the Chrysler 300 sits 22% above the Jeep Grand Cherokee ($245), 32% above the Ford Explorer ($227), and 14% above the Ford Edge ($262) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used rear bumper: what to check
- Inspect for previous repair filler. Thick paint or ripples signal a prior hit.
- Verify sensor cutouts match your trim's park-assist configuration.
- Confirm the paint code if you want to skip repainting.
- Check that the yard includes mounting hardware; clips are often broken during removal.
Keep browsing this vehicle
What other Chrysler 300 parts are priced?
01wide ±176%
Wheels
$175median
$45$662
02wide ±150%
Control Arm
$80median
$30$270
03wide ±207%
Grille
$132median
$22$569
04wide ±194%
Side Mirror
$135median
$35$560
05wide ±126%
Transmission Control Module
$125median
$21$335
06wide ±278%
Brake Caliper
$75median
$25$442
07wide ±138%
Front Seat
$181median
$50$550
08wide ±111%
Steering Column
$171median
$40$420
09wide ±115%
Headlight Assembly
$418median
$142$1,100
10wide ±261%
Car Radio
$207median
$50$1,131
11wide ±230%
Axle Shaft
$100median
$34$493
12wide ±222%
Fog Light
$146median
$25$672
Price comparisons
Compare Chrysler 300 rear bumper prices
Rear Bumpercompare
JeepGrandCherokeevsChrysler300
Cherokee$245
300$299
$54 diff4,036 listings
Rear BumpercompareFordExplorervsChrysler300
Explorer$227
300$299
$72 diff3,299 listings
Rear BumpercompareFordEdgevsChrysler300
Edge$262
300$299
$37 diff3,148 listings
Rear BumpercompareJeepCherokeevsChrysler300
Cherokee$197
300$299
$102 diff2,852 listings
Rear BumpercompareChevyEquinoxvsChrysler300
Equinox$244
300$299
$55 diff2,757 listings
Rear BumpercompareToyota4RunnervsChrysler300
4Runner$195
300$299
$104 diff2,623 listings
Compare fitments
What do similar vehicles charge for this part?
BMWwide ±112%
BMW X3
$579median
$100$1,395
BMWwide ±149%
BMW X5
$450median
$80$1,425
Chevywide ±171%
Chevy Equinox
$244median
$60$895
Chevywide ±148%
Chevy Malibu
$243median
$49$767
Chevywide ±255%
Chevy Silverado 1500
$325median
$80$1,735
Chevywide ±175%
Chevy Tahoe
$320median
$80$1,200
Chevywide ±142%
Chevy Traverse
$237median
$75$750
Dodgewide ±106%
Dodge Challenger
$350median
$150$895
Dodgewide ±210%
Dodge Charger
$228median
$39$995
Dodgewide ±181%
Dodge Durango
$255median
$70$995
Fordwide ±140%
Ford Edge
$262median
$67$800
Fordwide ±187%
Ford Escape
$250median
$70$1,005
Common questions
Chrysler 300 rear bumper FAQ
How much is a used rear bumper for a Chrysler 300?
The median asking price is $299 across 306 priced listings from 48 yards. 2017 is the cheapest model year we track, with a median of $297.
How much does it cost to replace a Chrysler 300 rear bumper?
Using a used part, a Chrysler 300 rear bumper replacement typically runs $445–$750 all-in: the median used rear bumper for this model lists at $299, and independent-shop labor for rear bumper replacement typically takes 1.5–3 hours at $95–$150/hr ($145–$450). The labor figure does not include paint and blending if the cover isn't color-matched, and sensor recalibration on park-assist trims. Labor is a national part-level estimate, not a quote for your vehicle.
Which Chrysler 300 model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2022, 2021, 2020, 2019, 2018, 2017. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Chrysler 300 rear bumper years are interchangeable?
Salvage-yard interchange data links Chrysler 300 rear bumper fitments across 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 11 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.