Chrysler 300 control arm price snapshot
- Low
- $30
- Average
- $113
- High
- $270
Vehicle-specific price guide
How much is a used Chrysler 300 control arm?
Asking prices from 484 salvage yards in 45 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 28, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Chrysler 300 control arm
What the control arm does, common failure signs, and prices across all vehicles: used control arm price guide →
Also known asLower Control ArmA-ArmWishbone
Price summary
A used Chrysler 300 control arm costs $30 to $270, with a median asking price of $80. Based on 3,222 priced salvage yard listings across the US, compatible across 2011–2023 (13 model years), updated Oct 28, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$100
Grade B (good)$80
Grade C (fair)$50
USD
Condition comparison
Price by part grade
Grade AClean / low wear$30–$2702,413 listings
Grade BStandard used$40–$249445 listings
Grade CVisible wear$50–$7123 listings
Grade XUngraded$45–$125341 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $30–$270 | 2,413 | |
| Grade BStandard used | $40–$249 | 445 | |
| Grade CVisible wear | $50–$71 | 23 | |
| Grade XUngraded | $45–$125 | 341 |
Median by grade
Grade price comparison
Grade A$100
Grade B$80
Grade C$50
Ungraded$55
Median asking price by seller-reported condition grade · $30–$270 overall range
Regional supply
Where the Chrysler 300 control arm is listed
We found priced Chrysler 300 control arm listings at 484 salvage yards across 45 states. California supplies the most, with 1,690 listings (11% of the total) from 28 yards. Location matters: yards in Texas ask a median $51, while Missouri yards ask $100, 96% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| California | 1,690 | 28 | $75-6% |
| Illinois | 1,274 | 22 | $75-6% |
| Texas | 1,138 | 29 | $51-36% |
| Michigan | 1,028 | 44 | $75-6% |
| Indiana | 903 | 18 | $100+25% |
| Missouri | 733 | 18 | $100+25% |
| North Carolina | 588 | 24 | $65-19% |
| Georgia | 554 | 16 | $85+6% |
States with at least 10 priced listings. % is versus the $80 national median.
Replacement cost
What is the Chrysler 300 control arm replacement cost?
- Used part
- $80
- Chrysler 300 median asking price
- Labor
- $95–$450
- 1–3 hours at $95–$150/hr
- Estimated total
- $175–$530
- median used part + labor
Labor is a typical independent-shop range for control arm replacement, not a quote for your vehicle; it does not include a wheel alignment after installation. The part price is the live median from the salvage-yard listings on this page. Full control arm replacement cost breakdown
Sources
- Labor time estimates: Part Price Guide labor database
RWD, high performance suspension (opt SDX), forward, RH33 listingsInterchange 2011–2023$74$35 – $249
RWD, high performance suspension (opt SDX), forward, LH29 listingsInterchange 2011–2023$97$55 – $249
Model-year comparison
What does a Chrysler 300 control arm cost by year?
2023550 listingsFits 13 years$80$35 – $2492022400 listingsFits 12 years$75$35 – $2492020850 listingsFits 13 years$80$30 – $2702019850 listingsFits 13 years$80$30 – $2702018850 listingsFits 13 years$80$30 – $2702017850 listingsFits 13 years$80$30 – $2702016850 listingsFits 13 years$80$30 – $2702015550 listingsFits 12 years$75$35 – $249
Market analysis
How much does a used Chrysler 300 control arm cost?
Asking prices for a used Chrysler 300 control arm are unusually spread out: the top listing asks about 9 times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 100% premium over grade-C stock, with grade-A medians at $100.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, RWD, performance suspension (opt SDD), forward, RH, lists at a $60 median, while RWD, performance suspension (opt SDD), rear commands $164, a 173% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2015 units carry the lowest median at $75, while 2016 tops the table at $80. Parts from 2011–2022 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 12 compatible years.
Against comparable vehicles, the Chrysler 300 sits 59% below the Toyota 4Runner ($193), 56% below the Mercedes S Class ($180), and 20% below the Mercedes E Class ($100) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used control arm: what to check
- Inspect ball joint boot and stud play: Check for torn rubber dust boots, cracked grease seals, or lateral movement in the ball joint stud when flexed with a pry bar.
- Check rubber bushing integrity: Look for dry-rotted, torn, or fluid-leaking hydraulic suspension bushings where the arm mounts to the subframe.
- Verify structural straightness against factory specs: Compare the arm against original dimensions to spot subtle bends caused by curb strikes or suspension impacts.
- Confirm ball joint attachment design: Determine whether the arm uses a bolt-on ball joint or an integrated press-fit socket to anticipate future maintenance needs.
- Torque bushing bolts at ride height only: Tightening subframe pivot bolts while the vehicle is raised on jacks twists rubber bushings and causes premature tearing.
Keep browsing this vehicle
What other Chrysler 300 parts are priced?
01wide ±176%
Wheels
$175median
$45$662
02wide ±207%
Grille
$132median
$22$569
03wide ±194%
Side Mirror
$135median
$35$560
04wide ±126%
Transmission Control Module
$125median
$21$335
05wide ±278%
Brake Caliper
$75median
$25$442
06wide ±138%
Front Seat
$181median
$50$550
07wide ±111%
Steering Column
$171median
$40$420
08wide ±115%
Headlight Assembly
$418median
$142$1,100
09wide ±261%
Car Radio
$207median
$50$1,131
10wide ±230%
Axle Shaft
$100median
$34$493
11wide ±222%
Fog Light
$146median
$25$672
12wide ±116%
Steering Wheel
$164median
$46$425
Price comparisons
Compare Chrysler 300 control arm prices
Control Armcompare
Toyota4RunnervsChrysler300
4Runner$193
300$80
$113 diff10,768 listings
Control ArmcompareMercedesSClassvsChrysler300
Class$180
300$80
$100 diff9,932 listings
Control ArmcompareMercedesEClassvsChrysler300
Class$100
300$80
$20 diff9,809 listings
Control ArmcompareFordMustangvsChrysler300
Mustang$75
300$80
$5 diff9,777 listings
Control ArmcompareDodgeChargervsChrysler300
Charger$75
300$80
$5 diff9,094 listings
Control ArmcompareMercedesCClassvsChrysler300
Class$120
300$80
$40 diff9,011 listings
Compare fitments
What do similar vehicles charge for this part?
Acurawide ±105%
Acura ILX
$75median
$34$191
Acurawide ±151%
Acura Integra
$167median
$65$569
Acurawide ±162%
Acura MDX
$165median
$45$581
Acurawide ±127%
Acura RDX
$128median
$30$355
Acurawide ±232%
Acura TLX
$88median
$35$443
Audiwide ±179%
Audi A4
$85median
$35$339
Audiwide ±167%
Audi A6
$120median
$36$437
Audiwide ±98%
Audi Q3
$143median
$40$321
Audiwide ±205%
Audi Q5
$95median
$25$415
Audiwide ±243%
Audi Q7
$83median
$44$447
Chryslerwide ±208%
Chrysler Pacifica
$116median
$30$513
Chryslerwide ±152%
Chrysler Voyager
$94median
$35$320
Common questions
Chrysler 300 control arm FAQ
How much is a used control arm for a Chrysler 300?
The median asking price is $80 across 3,222 priced listings from 484 yards. Grade-A units, the cleanest stock, have a median of $100. 2022 is the cheapest model year we track, with a median of $75.
How much does it cost to replace a Chrysler 300 control arm?
Using a used part, a Chrysler 300 control arm replacement typically runs $175–$530 all-in: the median used control arm for this model lists at $80, and independent-shop labor for control arm replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). The labor figure does not include a wheel alignment after installation. Labor is a national part-level estimate, not a quote for your vehicle.
Which Chrysler 300 model years does this price guide cover?
This guide currently has year-level pricing for 2023, 2022, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Chrysler 300 control arm years are interchangeable?
Salvage-yard interchange data links Chrysler 300 control arm fitments across 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023. Searching all 13 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.