Chrysler 300 axle shaft price snapshot
- Low
- $34
- Average
- $127
- High
- $493
Vehicle-specific price guide
How much is a used Chrysler 300 axle shaft?
Asking prices from 385 salvage yards in 37 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 29, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Chrysler 300 axle shaft
What the axle shaft does, common failure signs, and prices across all vehicles: used axle shaft price guide →
Also known asCV AxleCV ShaftDrive AxleHalf ShaftAxle AssemblyCovers front CV axles and rear axle shafts.
Price summary
A used Chrysler 300 axle shaft costs $34 to $493, with a median asking price of $100. Based on 1,863 priced salvage yard listings across the US, compatible across 2005–2023 (19 model years), updated Oct 29, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$137
Grade B (good)$85
Grade C (fair)$100
USD
Condition comparison
Price by part grade
Grade AClean / low wear$45–$4931,314 listings
Grade BStandard used$34–$295397 listings
Grade CVisible wear$45–$19254 listings
Grade XUngraded$50–$18598 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $45–$493 | 1,314 | |
| Grade BStandard used | $34–$295 | 397 | |
| Grade CVisible wear | $45–$192 | 54 | |
| Grade XUngraded | $50–$185 | 98 |
Median by grade
Grade price comparison
Grade A$137
Grade B$85
Grade C$100
Ungraded$75
Median asking price by seller-reported condition grade · $34–$493 overall range
Regional supply
Where the Chrysler 300 axle shaft is listed
We found priced Chrysler 300 axle shaft listings at 385 salvage yards across 37 states. Illinois supplies the most, with 1,126 listings (13% of the total) from 25 yards. Location matters: yards in California ask a median $75, while New Jersey yards ask $166, 121% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| Illinois | 1,126 | 25 | $100 |
| Texas | 949 | 22 | $105+5% |
| Georgia | 672 | 13 | $95-5% |
| California | 525 | 13 | $75-25% |
| Indiana | 473 | 18 | $100 |
| Alaska | 374 | 3 | $100 |
| Virginia | 364 | 8 | $126+26% |
| New Jersey | 348 | 10 | $166+66% |
States with at least 10 priced listings. % is versus the $100 national median.
Replacement cost
What is the Chrysler 300 axle shaft replacement cost?
- Used part
- $100
- Chrysler 300 median asking price
- Labor
- $95–$375
- 1–2.5 hours at $95–$150/hr
- Estimated total
- $195–$475
- median used part + labor
Labor is a typical independent-shop range for axle shaft replacement, not a quote for your vehicle. The part price is the live median from the salvage-yard listings on this page. How we price
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a Chrysler 300 axle shaft cost by year?
2023400 listingsFits 19 years$143$34 – $4932022300 listingsFits 19 years$100$34 – $2952021300 listingsFits 19 years$100$34 – $2952020300 listingsFits 19 years$100$34 – $2952019300 listingsFits 19 years$100$34 – $2952018300 listingsFits 19 years$100$34 – $2952017300 listingsFits 18 years$100$34 – $2952016300 listingsFits 18 years$100$34 – $2952015300 listingsFits 18 years$100$34 – $295
Market analysis
How much does a used Chrysler 300 axle shaft cost?
Asking prices for a used Chrysler 300 axle shaft are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 37% premium over grade-C stock, with grade-A medians at $137.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, rear axle, 3.6L, RWD, lists at a $61 median, while rear axle, 6.4L, RH commands $250, a 310% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2015 units carry the lowest median at $100, while 2023 tops the table at $143. Parts from 2005–2023 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 18 compatible years.
Against comparable vehicles, the Chrysler 300 sits 65% below the Mercedes GLE Class ($287), 50% below the Mercedes C Class ($202), and 53% below the Mercedes E Class ($215) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used axle shaft: what to check
- Inspect CV boots for cracks. A torn boot means the joint has likely ingested grit.
- Confirm ABS ring compatibility with your sensor setup.
- Left and right shafts usually differ in length, so verify the side.
- Spin the joints through full articulation and listen for clicking.
Keep browsing this vehicle
What other Chrysler 300 parts are priced?
01wide ±176%
Wheels
$175median
$45$662
02wide ±196%
Side Mirror
$134median
$35$560
03wide ±203%
Grille
$135median
$22$569
04wide ±150%
Control Arm
$80median
$30$270
05wide ±126%
Transmission Control Module
$125median
$21$335
06wide ±138%
Front Seat
$181median
$50$550
07wide ±278%
Brake Caliper
$75median
$25$442
08wide ±115%
Headlight Assembly
$418median
$142$1,100
09wide ±111%
Steering Column
$171median
$40$420
10wide ±222%
Fog Light
$146median
$25$672
11wide ±261%
Car Radio
$207median
$50$1,131
12wide ±156%
Center Console
$131median
$35$445
Price comparisons
Compare Chrysler 300 axle shaft prices
Axle Shaftcompare
MercedesGLEClassvsChrysler300
Class$287
300$100
$187 diff12,654 listings
Axle ShaftcompareMercedesCClassvsChrysler300
Class$202
300$100
$102 diff11,208 listings
Axle ShaftcompareMercedesEClassvsChrysler300
Class$215
300$100
$115 diff10,328 listings
Axle ShaftcompareJeepCherokeevsChrysler300
Cherokee$96
300$100
$4 diff10,016 listings
Axle ShaftcompareHyundaiSantaFevsChrysler300
Fe$126
300$100
$26 diff9,529 listings
Axle ShaftcompareJeepGrandCherokeevsChrysler300
Cherokee$150
300$100
$50 diff9,349 listings
Compare fitments
What do similar vehicles charge for this part?
BMWwide ±268%
BMW X3
$206median
$40$1,144
BMWwide ±174%
BMW X5
$225median
$40$823
Chevywide ±210%
Chevy Equinox
$110median
$32$493
Chevywide ±214%
Chevy Malibu
$90median
$30$415
Chevywide ±131%
Chevy Silverado 1500
$160median
$50$468
Chevywide ±159%
Chevy Tahoe
$139median
$50$493
Chevywide ±171%
Chevy Traverse
$137median
$25$493
Dodgewide ±237%
Dodge Challenger
$190median
$35$937
Dodgewide ±252%
Dodge Charger
$155median
$30$812
Dodgewide ±228%
Dodge Durango
$127median
$30$609
Fordwide ±166%
Ford Edge
$110median
$35$400
Fordwide ±171%
Ford Escape
$114median
$25$415
Common questions
Chrysler 300 axle shaft FAQ
How much is a used axle shaft for a Chrysler 300?
The median asking price is $100 across 1,863 priced listings from 385 yards. Grade-A units, the cleanest stock, have a median of $137. 2022 is the cheapest model year we track, with a median of $100.
How much does it cost to replace a Chrysler 300 axle shaft?
Using a used part, a Chrysler 300 axle shaft replacement typically runs $195–$475 all-in: the median used axle shaft for this model lists at $100, and independent-shop labor for axle shaft replacement typically takes 1–2.5 hours at $95–$150/hr ($95–$375). Labor is a national part-level estimate, not a quote for your vehicle.
Which Chrysler 300 model years does this price guide cover?
This guide currently has year-level pricing for 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Chrysler 300 axle shaft years are interchangeable?
Salvage-yard interchange data links Chrysler 300 axle shaft fitments across 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023. Searching all 19 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.