Used Buick Encore GX control arm from a salvage yard

Vehicle-specific price guide

How much is a used Buick Encore GX control arm?

Asking prices from 70 salvage yards in 9 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 14, 2026
Strong coverage328 priced of 441 observed2 variantsMethodology v2.1 →

Part overview

About the Buick Encore GX control arm

What the control arm does, common failure signs, and prices across all vehicles: used control arm price guide →

Also known asLower Control ArmA-ArmWishbone
Price summary

A used Buick Encore GX control arm costs $43 to $420, with a median asking price of $82. Based on 328 priced salvage yard listings across the US, compatible across 2020–2025 (6 model years), updated Oct 14, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$90
Grade B (good)$75
Grade C (fair)$50

Buick Encore GX control arm price snapshot

USD
Low
$43
Average
$123
High
$420
441 listings observed · 328 priced15d ago· How we price·

Report incorrect price

Reporting price for Buick Encore GX Control Arm

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$43–$321233 listings
Grade BStandard used$50–$42076 listings
Grade CVisible wear$50–$504 listings
Grade XUngraded$45–$10015 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $43–$420 overall range

Regional supply

Where the Buick Encore GX control arm is listed

We found priced Buick Encore GX control arm listings at 70 salvage yards across 9 states. Texas supplies the most, with 81 listings (25% of the total) from 20 yards. Location matters: yards in Texas ask a median $61, while Illinois yards ask $175, 187% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Texas8120$61-26%
Florida6011$85+4%
California5615$75-9%
Illinois506$175+113%
Arizona329$95+16%
Indiana243$80-2%
Wisconsin122$85+4%

States with at least 10 priced listings. % is versus the $82 national median.

Replacement cost

What is the Buick Encore GX control arm replacement cost?

ESTIMATE
Used part
$82
Buick Encore GX median asking price
Labor
$95–$450
1–3 hours at $95–$150/hr
Estimated total
$175–$530
median used part + labor

Labor is a typical independent-shop range for control arm replacement, not a quote for your vehicle; it does not include a wheel alignment after installation. The part price is the live median from the salvage-yard listings on this page. Full control arm replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Buick Encore GX Control Arm

$

Current avg: $123 — we suggest $105 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

LH29 listingsInterchange 2020–2025$61$50 – $420
RH24 listingsInterchange 2020–2025$90$45 – $305

Model-year comparison

What does a Buick Encore GX control arm cost by year?

$55$79$104$128$152202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Buick Encore GX control arm cost?

Asking prices for a used Buick Encore GX control arm are unusually spread out: the top listing asks about 10 times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 80% premium over grade-C stock, with grade-A medians at $90.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, LH, lists at a $61 median, while RH commands $90, a 48% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2021 units carry the lowest median at $61, while 2022 tops the table at $145. Parts from 2020–2025 are interchangeable, so if the 2021 fits your vehicle, it offers the best value across 6 compatible years.

Against comparable vehicles, the Buick Encore GX sits 58% below the Toyota 4Runner ($193), 54% below the Mercedes S Class ($180), and 18% below the Mercedes E Class ($100) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used control arm: what to check

  1. Inspect ball joint boot and stud play: Check for torn rubber dust boots, cracked grease seals, or lateral movement in the ball joint stud when flexed with a pry bar.
  2. Check rubber bushing integrity: Look for dry-rotted, torn, or fluid-leaking hydraulic suspension bushings where the arm mounts to the subframe.
  3. Verify structural straightness against factory specs: Compare the arm against original dimensions to spot subtle bends caused by curb strikes or suspension impacts.
  4. Confirm ball joint attachment design: Determine whether the arm uses a bolt-on ball joint or an integrated press-fit socket to anticipate future maintenance needs.
  5. Torque bushing bolts at ride height only: Tightening subframe pivot bolts while the vehicle is raised on jacks twists rubber bushings and causes premature tearing.

Keep browsing this vehicle

What other Buick Encore GX parts are priced?

Price comparisons

Compare Buick Encore GX control arm prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Buick Encore GX control arm FAQ

How much is a used control arm for a Buick Encore GX?

The median asking price is $82 across 328 priced listings from 70 yards. Grade-A units, the cleanest stock, have a median of $90. 2025 is the cheapest model year we track, with a median of $61.

How much does it cost to replace a Buick Encore GX control arm?

Using a used part, a Buick Encore GX control arm replacement typically runs $175–$530 all-in: the median used control arm for this model lists at $82, and independent-shop labor for control arm replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). The labor figure does not include a wheel alignment after installation. Labor is a national part-level estimate, not a quote for your vehicle.

Which Buick Encore GX model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Buick Encore GX control arm years are interchangeable?

Salvage-yard interchange data links Buick Encore GX control arm fitments across 2020, 2021, 2022, 2023, 2024, 2025. Searching all 6 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Buick Encore GX Control Arm Cost — From $43 to $420