Used Chevy Malibu control arm from a salvage yard

Vehicle-specific price guide

How much is a used Chevy Malibu control arm?

Asking prices from 243 salvage yards in 34 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 20, 2026
Strong coverage2,833 priced of 4,431 observed8 variantsMethodology v2.1 →

Part overview

About the Chevy Malibu control arm

What the control arm does, common failure signs, and prices across all vehicles: used control arm price guide →

Also known asLower Control ArmA-ArmWishbone
Price summary

A used Chevy Malibu control arm costs $28 to $308, with a median asking price of $75. Based on 2,833 priced salvage yard listings across the US, compatible across 2010–2025 (16 model years), updated Oct 20, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$75
Grade B (good)$75

Chevy Malibu control arm price snapshot

USD
Low
$28
Average
$104
High
$308
4,431 listings observed · 2,833 priced11d ago· How we price·

Report incorrect price

Reporting price for Chevy Malibu Control Arm

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$30–$3081,612 listings
Grade BStandard used$28–$306815 listings
Grade XUngraded$35–$150406 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $28–$308 overall range

Regional supply

Where the Chevy Malibu control arm is listed

We found priced Chevy Malibu control arm listings at 243 salvage yards across 34 states. California supplies the most, with 1,431 listings (35% of the total) from 43 yards. Location matters: yards in Missouri ask a median $50, while Indiana yards ask $100, 100% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California1,43143$75
Illinois54510$75
Arizona45221$75
Florida38331$75
Missouri2447$50-33%
Texas17426$50-33%
Indiana1589$100+33%
Virginia996$50-33%

States with at least 10 priced listings. % is versus the $75 national median.

Replacement cost

What is the Chevy Malibu control arm replacement cost?

ESTIMATE
Used part
$75
Chevy Malibu median asking price
Labor
$95–$450
1–3 hours at $95–$150/hr
Estimated total
$170–$525
median used part + labor

Labor is a typical independent-shop range for control arm replacement, not a quote for your vehicle; it does not include a wheel alignment after installation. The part price is the live median from the salvage-yard listings on this page. Full control arm replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Chevy Malibu Control Arm

$

Current avg: $104 — we suggest $88 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

2LT, LH41 listingsInterchange 2016–2023$75$50 – $226
LT, LH41 listingsInterchange 2016–2023$75$50 – $226
RS, LH41 listingsInterchange 2016–2023$75$50 – $226
2LT, RH37 listingsInterchange 2016–2023$75$50 – $226
LT, RH37 listingsInterchange 2016–2023$75$50 – $226
RS, RH37 listingsInterchange 2016–2023$75$50 – $226
LS, LH36 listingsInterchange 2016–2024$71$35 – $226
LS, RH36 listingsInterchange 2016–2024$70$28 – $226

Model-year comparison

What does a Chevy Malibu control arm cost by year?

$45$55$65$74$8420152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Chevy Malibu control arm cost?

Asking prices for a used Chevy Malibu control arm are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, LS, RH, lists at a $70 median, while RS, RH commands $75, a 7% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2019 units carry the lowest median at $50, while 2021 tops the table at $80. Parts from 2016–2024 are interchangeable, so if the 2019 fits your vehicle, it offers the best value across 9 compatible years.

Against comparable vehicles, the Chevy Malibu sits 61% below the Toyota 4Runner ($193), 58% below the Mercedes S Class ($180), and 25% below the Mercedes E Class ($100) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used control arm: what to check

  1. Inspect ball joint boot and stud play: Check for torn rubber dust boots, cracked grease seals, or lateral movement in the ball joint stud when flexed with a pry bar.
  2. Check rubber bushing integrity: Look for dry-rotted, torn, or fluid-leaking hydraulic suspension bushings where the arm mounts to the subframe.
  3. Verify structural straightness against factory specs: Compare the arm against original dimensions to spot subtle bends caused by curb strikes or suspension impacts.
  4. Confirm ball joint attachment design: Determine whether the arm uses a bolt-on ball joint or an integrated press-fit socket to anticipate future maintenance needs.
  5. Torque bushing bolts at ride height only: Tightening subframe pivot bolts while the vehicle is raised on jacks twists rubber bushings and causes premature tearing.

Keep browsing this vehicle

What other Chevy Malibu parts are priced?

Price comparisons

Compare Chevy Malibu control arm prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Chevy Malibu control arm FAQ

How much is a used control arm for a Chevy Malibu?

The median asking price is $75 across 2,833 priced listings from 243 yards. Grade-A units, the cleanest stock, have a median of $75. 2019 is the cheapest model year we track, with a median of $50.

How much does it cost to replace a Chevy Malibu control arm?

Using a used part, a Chevy Malibu control arm replacement typically runs $170–$525 all-in: the median used control arm for this model lists at $75, and independent-shop labor for control arm replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). The labor figure does not include a wheel alignment after installation. Labor is a national part-level estimate, not a quote for your vehicle.

Which Chevy Malibu model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Chevy Malibu control arm years are interchangeable?

Salvage-yard interchange data links Chevy Malibu control arm fitments across 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 16 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Chevy Malibu Control Arm Cost — From $28 to $308