Used Lexus NX300 control arm from a salvage yard

Vehicle-specific price guide

How much is a used Lexus NX300 control arm?

Asking prices from 133 salvage yards in 23 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 22, 2026
Strong coverage321 priced of 400 observed2 variantsMethodology v2.1 →

Part overview

About the Lexus NX300 control arm

What the control arm does, common failure signs, and prices across all vehicles: used control arm price guide →

Also known asLower Control ArmA-ArmWishbone
Price summary

A used Lexus NX300 control arm costs $39 to $298, with a median asking price of $100. Based on 321 priced salvage yard listings across the US, compatible across 2013–2021 (9 model years), updated Oct 22, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$135
Grade B (good)$75

Lexus NX300 control arm price snapshot

USD
Low
$39
Average
$123
High
$298
400 listings observed · 321 priced8d ago· How we price·

Report incorrect price

Reporting price for Lexus NX300 Control Arm

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$39–$298257 listings
Grade BStandard used$60–$17021 listings
Grade XUngraded$50–$12543 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $39–$298 overall range

Regional supply

Where the Lexus NX300 control arm is listed

We found priced Lexus NX300 control arm listings at 133 salvage yards across 23 states. California supplies the most, with 157 listings (18% of the total) from 28 yards. Location matters: yards in Minnesota ask a median $55, while New Jersey yards ask $193, 251% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California15728$75-25%
Minnesota1304$55-45%
Illinois1029$164+64%
Texas767$105+5%
Wisconsin727$82-18%
Florida6726$135+35%
Pennsylvania426$150+50%
New Jersey428$193+93%

States with at least 10 priced listings. % is versus the $100 national median.

Replacement cost

What is the Lexus NX300 control arm replacement cost?

ESTIMATE
Used part
$100
Lexus NX300 median asking price
Labor
$95–$450
1–3 hours at $95–$150/hr
Estimated total
$195–$550
median used part + labor

Labor is a typical independent-shop range for control arm replacement, not a quote for your vehicle; it does not include a wheel alignment after installation. The part price is the live median from the salvage-yard listings on this page. Full control arm replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Lexus NX300 Control Arm

$

Current avg: $123 — we suggest $105 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2021)

Other years202020192018
LH46 listingsInterchange 2013–2018$100$50 – $249
RH46 listingsInterchange 2013–2020$82$50 – $271

Model-year comparison

What does a Lexus NX300 control arm cost by year?

$68$86$105$123$1422018201920202021
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Lexus NX300 control arm cost?

Asking prices for a used Lexus NX300 control arm are unusually spread out: the top listing asks about 8 times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 80% premium over grade-B stock, with grade-A medians at $135.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, RH, lists at a $82 median, while LH commands $100, a 22% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2018 units carry the lowest median at $75, while 2019 tops the table at $135. Parts from 2013–2018 are interchangeable, so if the 2018 fits your vehicle, it offers the best value across 6 compatible years.

Against comparable vehicles, the Lexus NX300 sits 48% below the Toyota 4Runner ($193), 44% below the Mercedes S Class ($180), and level with the Mercedes E Class ($100) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used control arm: what to check

  1. Inspect ball joint boot and stud play: Check for torn rubber dust boots, cracked grease seals, or lateral movement in the ball joint stud when flexed with a pry bar.
  2. Check rubber bushing integrity: Look for dry-rotted, torn, or fluid-leaking hydraulic suspension bushings where the arm mounts to the subframe.
  3. Verify structural straightness against factory specs: Compare the arm against original dimensions to spot subtle bends caused by curb strikes or suspension impacts.
  4. Confirm ball joint attachment design: Determine whether the arm uses a bolt-on ball joint or an integrated press-fit socket to anticipate future maintenance needs.
  5. Torque bushing bolts at ride height only: Tightening subframe pivot bolts while the vehicle is raised on jacks twists rubber bushings and causes premature tearing.

Keep browsing this vehicle

What other Lexus NX300 parts are priced?

Price comparisons

Compare Lexus NX300 control arm prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Lexus NX300 control arm FAQ

How much is a used control arm for a Lexus NX300?

The median asking price is $100 across 321 priced listings from 133 yards. Grade-A units, the cleanest stock, have a median of $135. 2018 is the cheapest model year we track, with a median of $75.

How much does it cost to replace a Lexus NX300 control arm?

Using a used part, a Lexus NX300 control arm replacement typically runs $195–$550 all-in: the median used control arm for this model lists at $100, and independent-shop labor for control arm replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). The labor figure does not include a wheel alignment after installation. Labor is a national part-level estimate, not a quote for your vehicle.

Which Lexus NX300 model years does this price guide cover?

This guide currently has year-level pricing for 2021, 2020, 2019, 2018. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Lexus NX300 control arm years are interchangeable?

Salvage-yard interchange data links Lexus NX300 control arm fitments across 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021. Searching all 9 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Lexus NX300 Control Arm Cost — From $39 to $298